Omg who cares it’s his car and I bet if he straches it ,he just go back to the dealer ship and buys another truck so why u guys are so butthurt I bet you you’re car doesn’t look this nice and clean like his so f***k off!!!!
Looks awesome! I have a few questions, firstly regarding staying on, can you pressure clean your car does the adhesive withstand the pressure? and in the sun does it just come loose? Thirdly can you shut your bonnet normally in a normal motion not so slow and gentle as you did it? And what did you use for the right side where the battery isn't? I imagine very long wires extending back to your battery that may be problematic.
Love your personality and how u explain everything so well and with such Great energy!! New subbie! I’m about to hook-up my Lexus from watching your videos. Thank u!
Can you hook that black wire into ground wire to get power. Im thinking about just installing the wires into turn signals and headlight wires. My car is old
I believe it's pretty similar to regular led strips except with the individual led connected to the modulator. U only need to cut it from the end side and keep the front. After that u'll need to cover the end since there's wires travelling the whole strips. DONT TAKE THIS FOR GRANTED.
these are actually made for external use , there most definitely is a mode for internal use but its most definitely some work recommended a really good heat gun when attempting it as well, if not the possibility of kracking your headlights is very possible
Just installed this on my 2012 Chrysler 200 (only amber not the DRL since car already came with it) I was very lucky that actually the top of the headlights assembly has recessed behind the top line clear lens got perfectly enough room to stick it and because of that the strip looks like installed inside the housing, love it, thanks for the video 👍👍👍
Keye T its not common to find it pre installed, you can buy the halo leds (similar price too) and install inside but you have to, take them off the car, still wire it up, bake to remove it, reinstall a silicon seal and close em back up, risk braking them-opening up since not allheadlights are the same. When i can just tape
Don't you need two yellow turn signal wires, one for each light? If the one wire is connected to just one light, how will it know if you're turning left or right?
Yes , each led strip has its own wiring and control box. He just connected to the battery for the demonstration. For actual installation, each side would require a connection to a ground, switched power, and the turn signal power.
Many ppl suggesting bottom of headlights but how would you hide the wire going in to the power supply - like many others would like to know the most important part of how to connect the wires into existing power supply
i want to do this in my camry. looks so cool. but the installation seems complicated to me. i dont know anything inside the hood other than air filter.
Can someone precisely tell how to do the wire connections on a 2019 Toyota Highlander. I tried today and couldn't get through with it. I only got the yellow light to turn on and it did not blink/flash. Any help will be appreciated.
You will actually need something like this: amzn.to/2M5OFjq However please note that every vehicle is different. Also contact the company and they will help you find the best solution for your vehicle.
Jay Lapa huh that’s weird. This shouldn’t effect the check engine light actually. Just go to autozone and check what caused the check engine light. It shouldn’t be the lights tho.
Hello , thanks for posting the video. Seeing the reviews that the thing is not brighter or dimming off in couple of days/ weeks. Is it worth a buy? Thanks
Take the original halogen bulbs out from the indicator and just leave the led. I’m not sure if your car will hyper flash because of that but it would look so much better.
Anyone answer this? IS there a strip like this that is brighter so they can be seen in the daylight? I think that is what we all want right, not just for night time.
@@KLEANTRIX thanks because all i need is about 4/5 inch. I'm not sure if you might know a better option what I'm looking for is th-cam.com/video/BkLaMp5yQW4/w-d-xo.html
@@KLEANTRIX What I meant to say was, the 1 star reviews stated they died within weeks to months. I was asking to see how long yours lasted, if not, are still working altogether.
"Actual / Actually" count = 56. (seriously dude. It's annoying as hell) But thanks for the video. I hadn't heard of this and I think it would look great on my Miata.
Here is the link: amzn.to/2GQ94FG If sold out, don't worry it will be in stock in a few days.
Really cool how do I get them in Nigeria?
Can you make a video how to splice the wires correctly?
How to do the wiring connections?
What would cost me on Amazon?.as well think looking like on Pontiac g6 gt 2.door it black on black
Can u just connect the 3 wires to the turn signal housing instead of the battery
I think the length would fit better on the bottom of the headlamp
I work at a body shop and my hair is standing on end with you using your hood as a table/counter.
Money doesn't buy brains
lol
Omg who cares it’s his car and I bet if he straches it ,he just go back to the dealer ship and buys another truck so why u guys are so butthurt I bet you you’re car doesn’t look this nice and clean like his so f***k off!!!!
@Malik Martin .l LLP
So agreed unless the guy planing to change to car paint color lol
Looks awesome! I have a few questions, firstly regarding staying on, can you pressure clean your car does the adhesive withstand the pressure? and in the sun does it just come loose? Thirdly can you shut your bonnet normally in a normal motion not so slow and gentle as you did it? And what did you use for the right side where the battery isn't? I imagine very long wires extending back to your battery that may be problematic.
Since this vid was made awhile ago, how well the led light hold up or longevity of the led light?
1:54 "Pacific Vehicle"
As opposed to an Atlantic vehicle 😂
YOU GOT TO HEAR WHEN HE SAYS “LITERATURE” ... HE SAYS EVERY SINGLE LETTER IN THERE 😂
Love your personality and how u explain everything so well and with such Great energy!! New subbie! I’m about to hook-up my Lexus from watching your videos. Thank u!
Thank you so much!!
I think you might have pulled off a sexier look with the strip at the bottom of the lights. Maybe have two per side? Great share bro.
Can you hook that black wire into ground wire to get power. Im thinking about just installing the wires into turn signals and headlight wires. My car is old
Can you connect the positive and negative to the light wires?
The wiring NONE Of any videos I’ve seen shows the actual wiring step by step 😤
Bryant Demby it’s easy
Trueee
I watched so many videos and its impossible to find a right way to connect.
@@jrvargas3096 HOW THEN
The same here.. i was till now not able to find any wiring example, do we need any connectors to connect to the headlight cable.
How does it hold up to the elements and car washes? Looks like it will peel off.
Nelson Guzman it won’t because it’s sandwiched between the hood and the headlight. You are fine.
What’s that yellow wire Ur using called and where can I buy it
Can you make a video showing how to splice the wires correctly
I believe it's pretty similar to regular led strips except with the individual led connected to the modulator. U only need to cut it from the end side and keep the front. After that u'll need to cover the end since there's wires travelling the whole strips. DONT TAKE THIS FOR GRANTED.
So as Sergio asked, could you do a video showing how to slice the wires correctly? 😂😂
Especially the turn signal where and how to perfectly connect it?
@@dedanieldd That made no sense.
@@starscream42
😅 English is not my first language
Its been 2 years. Do you still have this on the car or did you get paid for this video? Please update
Installation is at 07:12
Nice commentary. however i was more looking on how you made the connection to the actual headlight power cables. did you use any kind of connector?
Hi just wondering are there any for the taillight
Just bought a pair for my 07 Colorado, how has it kept up 2 years later?
Did you used alligator wires for headlight?
I want to see someone put in the extra time and effort into fitting this product inside the headlight to see the look.
I’ll buy it rn and do it
these are actually made for external use , there most definitely is a mode for internal use but its most definitely some work recommended a really good heat gun when attempting it as well,
if not the possibility of kracking your headlights is very possible
Can this be installed at the brake and signal light?
You can buy with 3 length choices. 30cm 45cm or 60cm. What is the size of that led strip bro?
If i want to just hide the led strip for any inspection, do I just have to disconnect ground wire?
That would work, but why hide it?
Just installed this on my 2012 Chrysler 200 (only amber not the DRL since car already came with it) I was very lucky that actually the top of the headlights assembly has recessed behind the top line clear lens got perfectly enough room to stick it and because of that the strip looks like installed inside the housing, love it, thanks for the video 👍👍👍
you BLEW my mind when you said i didn't need to open my headlight up!
im definitely gonna buy this
INDIAN SUV BLOGGER how so? Do you have one?
just open them up lol... or get some aftermarkets,, this is a global vehicle... wide selection
Keye T oof not mine, the halo headlights are $400 and thats the cheapest pair.... plus its not common. So these seem like a good choice. You know?
OverKnight 52 They are but just open the headlight and install them... it's less hassle in the future
Keye T its not common to find it pre installed, you can buy the halo leds (similar price too) and install inside but you have to, take them off the car, still wire it up, bake to remove it, reinstall a silicon seal and close em back up, risk braking them-opening up since not allheadlights are the same. When i can just tape
Yea I drive a 2017 Chevy Equinox midnight and I wanna make sure I have a step by step of the wiring so I’m not messing anything up
This is a nice touch for the front. What do you suggest for the rear tail lights to match? Thanks
I'll have to find something else, however the rear is a whole different ball game and not necessarily have to match the front.
When you finished your wiring did you run your acc Power wire independently or together?
What kind of fuse did you use..im having problems with this shutting down my car randomly
Don't you need two yellow turn signal wires, one for each light? If the one wire is connected to just one light, how will it know if you're turning left or right?
Yes , each led strip has its own wiring and control box. He just connected to the battery for the demonstration. For actual installation, each side would require a connection to a ground, switched power, and the turn signal power.
Can you make a video of you showing how to install it in the car including how to splice the wires
What's the shabby count at the end of the video? 🙊
My led strip one say R and of other L .wich side go on driver side ? Can help thanks
R for driver side
do these work with canbus vehicles?
Many ppl suggesting bottom of headlights but how would you hide the wire going in to the power supply - like many others would like to know the most important part of how to connect the wires into existing power supply
You can also put it inside the headlight casing. But it would entail a lot of work.
Hi! I buy this product. I have a European Rav 4 2020. Can you help me to install de led Strip? I have problems... THX!
Says "actually" 94924 times
He says “not too shabby” 73673 times
been watching you since like 2016, and i still dont know your name Lol
The packaging says it can be used on cars, "Sccoter" 😂
i want to do this in my camry. looks so cool. but the installation seems complicated to me. i dont know anything inside the hood other than air filter.
Lol its not hard at all. Just hide all wires to keep it clean.
Omg I wanna get that to my Accord 2018. Or is there a way for me to keep my stock accord turn signal stay on yellow light all the time ?
Did you try parking lights?
im going to get this at some point and replace my dead DRL with this on both headlights, there aftermarket ones but the one drl is still working.
Bro need wiring. Please add link to buy wires.
Did you record how to connect the wiring, for this to work?
Can someone precisely tell how to do the wire connections on a 2019 Toyota Highlander. I tried today and couldn't get through with it. I only got the yellow light to turn on and it did not blink/flash. Any help will be appreciated.
What are those things at the end of the led strip you used to test the led strip with clips ? Where did you get them ?
They are called like alligator wire clips or something
Whered you get the yellow wire to test the light?
How much guage wire to be used for wiring this strips
Did they last?
Are you sure this won't get damaged with continuous car washes?
Can you please give me the link or the name of the extension wire? and how do you hook it to the turn signal power? Thanks
You will actually need something like this: amzn.to/2M5OFjq However please note that every vehicle is different. Also contact the company and they will help you find the best solution for your vehicle.
You find that when u have the head lights on the turn signal only goes half way??
Hey man i got this installed on but when i got it back it had a check engine light on. What should i do?
Jay Lapa huh that’s weird. This shouldn’t effect the check engine light actually. Just go to autozone and check what caused the check engine light. It shouldn’t be the lights tho.
Never heard anyone describe zip ties as “cute” lolz. Enjoyed the video my man.
Hello , thanks for posting the video. Seeing the reviews that the thing is not brighter or dimming off in couple of days/ weeks. Is it worth a buy?
Thanks
Where can I plug the earth if my battery is in the trunk?
Install it on the bottom gap of the headlight instead. Not the top
Jose Arreguin definitely should be on the bottom with that particular headlight. It would span the entire bottom front of the headlight
Any suggestions on interior truck?
What size do you require?
How was spliced the wires?
Run it through a carwash and let's see will it survive
Nothing can move it, smashed between the hood and the headlight itself
I think the first mistake is actually running your car through an automated car wash.
@@starscream42 I don't see it as a mistake. Most consumers would expect the lights to hold if you're sticking anything on the outside of your car.
Danny Sil I think hes just saying automated car washed suck because they damage the paint. With the exception of touchless washes
How would you apply this on a 2012 beetle?
what cables did you use to ground and power the strip?
Take the original halogen bulbs out from the indicator and just leave the led. I’m not sure if your car will hyper flash because of that but it would look so much better.
Anyone answer this? IS there a strip like this that is brighter so they can be seen in the daylight? I think that is what we all want right, not just for night time.
I installed these and over time when it gets warm they start to flash orange, anybody experienced that?
Where did he get the clips which connect to the wires?
Please could you explain how I’m going to install the wires on Kia Optima k5 2012 honestly it’s looks amazing but I don’t know how to connect them
Where in Texas are you located? I'm in Texas too
Is it waterproof
""Angle eyes""😂😂its Angel eyes btw lmao
Thanks for your time. Just perches this can't wait to see on my car.
How do you connect the yellow wire with turn signal?
splice it
Yo brother, Does it have animation when turning on white light (not the signal one) . Anyone please let me know
This one does not, however you might find other ones that do. Good question
Does it throw an error code or is there a resistor built in?
No error code or resistor because this is independent from the original turn signal socket.
Can't you just take out the bulb in the headlights on the front and just use the led strips for turn signals ?
Not really. It will throw an error. You can install a rezistor to mimic voltage usage
Can you cut the led strip if it's too long ?
Yes
@@KLEANTRIX thanks because all i need is about 4/5 inch. I'm not sure if you might know a better option what I'm looking for is
th-cam.com/video/BkLaMp5yQW4/w-d-xo.html
You didn't explain how you'd connect the DRL wiring to work during the day when connected to your car.
Wait can i cut it if its too long?
Do they still work? If not, how long did they last?
Asking because of the 1 star reviews on Amazon.
I don't see a 1 star. Also they last a long time due to them being LEDs amzn.to/3iYEto1
@@KLEANTRIX What I meant to say was, the 1 star reviews stated they died within weeks to months. I was asking to see how long yours lasted, if not, are still working altogether.
@@LBVFISH ahh I see. Yeah they probably got a bad one or didn’t wire it correctly. However they still work.
@@KLEANTRIX Awesome...tyvm
Can this work on your old type of honda accord u had 2013?
Yes it can.
Show how u cut the wires and where u mounted to rest of the wires
Pls show us on sccoter..
Will these work on a 2009 Toyota Sequoia?
Yes
CAN you put it on an accord?
Nice video and amazing product, ordered a set and nay look into ordering some for the rear!
Is it suitable for Acura TSX 2011? I'm in UK we have Honda accord (headlights like Acura TSX) doesnt have DRL.
Morphed Renegade any car, just gotta stick it on
"not too shabby"
Natanael Garcia soon as i scrolled through comments he said it😂
@@TreySoSuave haha yeah I was like "dude!" Haha same happened to me!
Looks good bruv.
Need to add to this on my F150 👌🏼
i have thr sane ones but i skipped the turn signal part bc i couldn’t get it to work right
What's a pacific vehicle?
If I learn something about this video is that these lights are not too shabby Thanks for the video SIR
😂
01.55 Did he say 'pacific' to your vehicle? Not 'specific' to your vehicle?
can i make it to audi a4 2014 ?
Yes, you will have to connect the wires correctly.
"Actual / Actually" count = 56. (seriously dude. It's annoying as hell)
But thanks for the video. I hadn't heard of this and I think it would look great on my Miata.
Actually!!!!!!!!!!!!!
Not too shabby, bad boy
how can i buy this item from india please reply ??
Thank you for sharing this video!
Great content ! As always! Just curious what camera you use for your videos ?
kit.com/KLEANTRIX/favorite-video-making-gear
Can Anyone Please give me a step by step explanation on how to install them properly and safely