Fixing a GE Stackable Washing Machine that Won't Drain Out the Water

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 54

  • @tomreeves8355
    @tomreeves8355 10 หลายเดือนก่อน +3

    Hey - I have a GE stackable washer/dryer - All of the modes work (spin, rinse, etc), expect for the wash cycle. For wash it starts, fills the drum and then there are some clunking sounds. Only the wash light will blink after that. The lid lock feature works in other modes. Any idea what could be going on?

  • @atanner88
    @atanner88 7 หลายเดือนก่อน +5

    Thanks for the video! I ordered a replacement part and I still had the same issue. What I found was that during moving the door had got a little warped such that with a little weight, the lid switch activated. So I would suggest folks first try firmly pushing on that corner to see if they can get it to lock. If so, then a little bit of tweaking of the lid could save you the $40! Fortunately Amazon has an excellent return policy :)

  • @scottreddin5840
    @scottreddin5840 5 หลายเดือนก่อน +3

    Thank you for your video! That was exactly and precisely what was going on with mine. I followed you step by step, and it is fixed.
    No more rugs for me. You are awesome!

  • @darcyritt6179
    @darcyritt6179 ปีที่แล้ว +3

    You saved me a call to a technician. Thank you!!!

  • @nathandorante2094
    @nathandorante2094 ปีที่แล้ว +1

    So does the lid lock actually engage enough to lock the lid? Ours does but otherwise having the same issue. Thanks

  • @eschrader
    @eschrader 2 หลายเดือนก่อน

    My issue is sometimes the pump hums but doesn't drain. I'm thinking I have a sock in the pump but I will use this video to get the front panel off and check! Thanks

  • @mariahkayley
    @mariahkayley 2 ปีที่แล้ว +2

    hi what’s the link for the switch thank you !!

  • @davidakinniyi5992
    @davidakinniyi5992 ปีที่แล้ว +1

    where can I buy the lid lock part

  • @markcrogan3807
    @markcrogan3807 ปีที่แล้ว +1

    So GE has been out 4 times, 1st time was under warranty. 2 times they billed, last time they replaced a sensir and left and 1st load it filled, agitated briefly and shut iff. All indicator lights were out. Now they are coming again tuesday, any ideas?

    • @ApartmentMaintenancePro
      @ApartmentMaintenancePro  ปีที่แล้ว

      All lights off and non responsive buttons? If it’s not a breaker (not likely) got to troubleshoot with the volt meter to see where line voltage is not present

    • @markcrogan3807
      @markcrogan3807 ปีที่แล้ว

      @@ApartmentMaintenancePro we have power, the cycle can be restarted but always the same results, it just quits at some point with a full tub. It's at my mom's and I will be visiting today but GE is sending someone again next Tuesday so I won't likely get involved yet. They offered to give me a credit on a new one and this one is very lightly used by a 90 year old.

    • @juttaduncan7216
      @juttaduncan7216 11 หลายเดือนก่อน

      Did you figure it out? Mine is doing it. Fills, agitated couple times, shots off

    • @markcrogan3807
      @markcrogan3807 11 หลายเดือนก่อน

      A very nice tech came the last time and determined itt was weak suspension springs. He ordered them came back and instalked under warranty and it has been fine since.​@@juttaduncan7216

  • @davidwilkinson9385
    @davidwilkinson9385 7 หลายเดือนก่อน

    Hi , I’m working on one of these now. The user said the following about what she was experiencing “ It wouldn’t fill all the way for the load, and when in wash cycle I believe because of the clutch broken they explained that it would only do a quarter of the spin instead of doing the half back and forth it should of been doing. “
    If you look up clutch part it’s just the plastic gear showing. I guess she had an appliance person come look and say it was the clutch.
    I
    I looked at the clutch and there’s no teeth missing, so I’m sceptical that’s what it is. It’s apart now so I can’t test without reassembling. Just wondering based on her description of the symptoms what you would be looking at 1st?

    • @ApartmentMaintenancePro
      @ApartmentMaintenancePro  7 หลายเดือนก่อน

      I don’t really know. Maybe the teeth are there but slipping?

    • @davidwilkinson9385
      @davidwilkinson9385 7 หลายเดือนก่อน

      @@ApartmentMaintenancePro I thought you’d be able to see some visible wear on the teeth if that were the case. I’m also Trying to understand why the washer not filling enough could be related to a clutch. I did take the shift assembly off and tested the motor with 120v applied. That seems to be working fine, the motor turns the shifter wheel very slowly which I’m thinking is normal.

  • @alucard5980
    @alucard5980 5 หลายเดือนก่อน

    Hi could you help me, my washer and dryer. Just not do anything, throw a little water and later doesn’t do anything. I tried connectors switch but I don’t have any idea what is the problem? Could you help me please

  • @cameronhawkins1858
    @cameronhawkins1858 ปีที่แล้ว +1

    I've tried this in about a dozen of these exact same machines. The plug never comes out for me. It's ridiculous. Even had 2 guys pulling with channels as hard as we could. Ended up just busting the old one off every time making sure not to damage the plug.

  • @adelmomew
    @adelmomew ปีที่แล้ว +1

    Hey, can u make a video to put it on service mode? The old model i could, this new model wont work

    • @ApartmentMaintenancePro
      @ApartmentMaintenancePro  ปีที่แล้ว

      What model are you looking for? There should be a tech sheet behind the plate above the washer lid thats held in with the three philips screws. But ya I will make a video on service modes

    • @theprowiiugamer
      @theprowiiugamer 5 หลายเดือนก่อน

      Hey, my GE washer is very loud when unbalanced load and clothes stuck in the agitator. What can I do?

  • @patriciaperry1626
    @patriciaperry1626 6 หลายเดือนก่อน

    WHAT IF I HAVE AN OLDER MODEL THAT DOESN'T HAVE A LIGHT PANEL ON IT

  • @stevefrazier5077
    @stevefrazier5077 2 ปีที่แล้ว +1

    Newish?

  • @steveho9884
    @steveho9884 ปีที่แล้ว +3

    my won't spin and drain how to fix it?

    • @dylanlarson5086
      @dylanlarson5086 2 หลายเดือนก่อน

      Did you ever figure it out?!

  • @laurenfinesse
    @laurenfinesse ปีที่แล้ว +4

    THANK YOU THANK YOU THANK YOU!!!! I was able to fix and replace the lid lock from this video. You just saved me hundreds of dollars ❤❤❤❤❤❤

  • @ginact822
    @ginact822 ปีที่แล้ว +1

    Let me ask, my lid lock comes on, but it’s still not draining the water

  • @kamcheatham6090
    @kamcheatham6090 ปีที่แล้ว

    Anyone have any suggestions to get the front cover off the washer? I’ve tried using a putty knife like in the video but can’t get it to open

    • @desireealger8117
      @desireealger8117 ปีที่แล้ว

      Peer in and see where the slight bump is aprox 4 & 1/8 inches in from side. You have to hit the butt of the putty knife pretty firmly.

  • @jennsSelfLoveJourney
    @jennsSelfLoveJourney 5 หลายเดือนก่อน

    Thank you so much! I just pushed it down with the back of and ink pen and boom! It started draining

  • @madn1616
    @madn1616 ปีที่แล้ว

    Tried this fix and it did not work! Pretty bummed out, probably just need to replace this machine if there are many other things that can cause it to fail

  • @billeisert4517
    @billeisert4517 ปีที่แล้ว

    My washer fills with water then stops. I have to turn it off then back on a couple times before it will continue in its cycle

  • @c21meister
    @c21meister 2 ปีที่แล้ว +6

    Worse lid switch ever

    • @ApartmentMaintenancePro
      @ApartmentMaintenancePro  2 ปีที่แล้ว +1

      They are pretty cheap

    • @sroth8087
      @sroth8087 2 ปีที่แล้ว +2

      Mine is bad right out of the box! Thanks for the video.

    • @shangleonard4525
      @shangleonard4525 ปีที่แล้ว +1

      Worst washer ever my mom's hasn't even made 5 loads and already out. And apparently the switch and lock are not the only problem control boards pumps transmission a ton of problems on these junk piles of scrap

  • @mrcoollu9662
    @mrcoollu9662 ปีที่แล้ว

    If the loads not balanced eventually you will here a loud noise . I tell customers that all the time .

    • @nicholasbell75
      @nicholasbell75 ปีที่แล้ว

      Most likely the dampeners are going bad

  • @THEEND-qg7hy
    @THEEND-qg7hy หลายเดือนก่อน

    WATCHING THE VIDEO I THOUGHT IT WAS GOING TO LIFT OFF AND FLY AWAY GOING SO FAST

  • @ningstover1221
    @ningstover1221 8 หลายเดือนก่อน

    Same here!!! Right now!!

  • @tomwinter6532
    @tomwinter6532 4 หลายเดือนก่อน

    Very helpful. Thank you!

  • @bruciebakadeepinyuh105
    @bruciebakadeepinyuh105 10 หลายเดือนก่อน

    See my problem is…the machine drains fine…but every so often there’s clean standing water in the washer….

  • @brightonjordan9984
    @brightonjordan9984 ปีที่แล้ว

    Thank you.

  • @chrispopejoy
    @chrispopejoy ปีที่แล้ว

    Omg you helped me so much! Thank you! 🙏🏻

  • @BBGG-5
    @BBGG-5 ปีที่แล้ว

    Thank you

  • @420flying6
    @420flying6 ปีที่แล้ว

    A million videos all the lock switch 😂😂😂 changed switch and still not working.

  • @twinsontwinsfamily2583
    @twinsontwinsfamily2583 6 หลายเดือนก่อน

    Thank you sir

  • @zux133
    @zux133 9 หลายเดือนก่อน

    Thanks!! 🤟🏽

  • @andrewc1036
    @andrewc1036 ปีที่แล้ว

    You are a god

  • @ricenbeenz...
    @ricenbeenz... 5 หลายเดือนก่อน

    It's funny cuz my problem came precisely from washing a rug 😅 oops

  • @Primedprepper
    @Primedprepper 10 หลายเดือนก่อน

    Thank you 🫡 lock was just sticking had to poke around a little and it worked fine