AccuTune Offroad U-Bolt Flip & Bump Stop Kit for 05+ Tacoma

The AccuTune Offroad U-Bolt Flip Kit is designed to allow for maximum suspension travel on the rear of a 2005+ Toyota Tacoma. Due to the wide variety of shocks and leaf springs available, the Tacoma market was in desperate need for proper bump stop height options. Not only does this solve the issue with bump stop height requirements, but you will also gain ground clearance with the u-bolt flip and improve ride quality with our specially designed bump stop. The AccuTune Offroad bump stop kit can be purchased with several different length spacers to meet the requirements of your shock and leaf spring setup. Don’t sacrifice the performance of your suspension and upgrade your Tacoma today!
Features:
-Powder Coated Steel U-Bolt Plates
-Billet Aluminum Bump Stop Holder
-AccuTune Offroad Bump Stops
-8.5" U-Bolts with washers & nuts
accutuneoffroad.com/product/accutune-offroad-u-bolt-flip-kit-05-toyota-tacoma
AccuTune Offroad
www.AccuTuneOffroad.com
619-722-8555
[e-mail]

[@draykestar]

he said "you would be shocked..."
*ba-dum tss* 😂

[@accutuneoffroad]

I see what you did there

[@Dude17768]

I upgraded to the one you’re offering to go with my fox 2.5 performance elite shocks for my 22 trd off road Tacoma.

[@accutuneoffroad]

You are one of the lucky first customers! Thank you

[@Dude17768]

@@accutuneoffroad absolutely, I have a quick question tho. I’m planning on running the deaver stage 2 leaf’s with the fox 2.5 performance elite shocks. What is the spacer size I need? I’m just wanting to make sure the one on my invoice is correct? Thanks

[@accutuneoffroad]

@@Dude17768 If the rear shocks are FOX-883-26-113, we suggest using 2.00" spacers for the Deaver U402-2 leaf pack.

[@rookwalker]

I cut my sumo springs in half and now I think I messed up 😅

[@bulljolly7028]

I bought archive garage flip kit with the yellow bump stop for a set of deaver’s from you guys for a 3rd Gen Tacoma . Would just the spacers fit that flip kit for the Tacoma ?

[@accutuneoffroad]

Our u-bolt plates are pre drilled with counter sunk holes. You would be better off purchasing our u-bolt plates along with spacers and bump stops

[@usafbade2012]

i have a 07 tacoma trd sport that i bought that already has some installed lift blocks all 4 corners , i have upgraded to bilestin 5160 in the rear which bumpstop kit would you recommend . i didnt see anything that matched on your list .

[@accutuneoffroad]

Unfortunately we dont have shock lengths for every shock out there, so I wouldn't be able to give you a straight answer at this time. We are working on a diagram that will help customers measure on their own to see what spacers they need. I expect that to be done in the next few weeks and will be on our product page

[@TacomaTrailblazer]

I have a 6” block underneath the leaf, I also have black sumo spring, do you make ubolt flip kit for my set up?

[@accutuneoffroad]

We would need to get more specific measurements from the lift block and leaf spring pack to confirm our u-bolts would be long enough. Also would need to know the compressed length of the rear shocks you have. Send over an email to our sales team and we can help you with measurements [e-mail]

[@Methadras]

2021 Tacoma with Fox 2.0's all the way around and I added a 1" block spacers in the rear. Is there enough thread with the proper bump stick to pick up that 1" or should I get an extended set of U-Bolts?

[@accutuneoffroad]

Our bump stop kits come with longer u-bolts.

[@cedricwilson1335]

Hi im running icon rxt leaf pack stage one with the icon 2.5 rxt shocks with cdcv. I dont see the recommended spacer for these shocks on the chart

[@accutuneoffroad]

Unfortunately we don't have measurements for Icon shocks.

[@ciscoh1]

Any suitable for a second gen Tacoma?
I got a 2015 and couldn’t find a set for mine

[@accutuneoffroad]

These u-bolt flip kits fit both 2nd gen and 3rd gen Tacomas. accutuneoffroad.com/product/accutune-offroad-u-bolt-flip-kit-05-toyota-tacoma/

[@prockfisherman8661]

Do they make one for the nissan frontier platform?

[@accutuneoffroad]

Unfortunately no, just Tacoma at the moment.

[@Vallero760]

Hey guys I have a 09 Tacoma and I’m running the Icon 2.0 w/ rez in the rear and a icon rxt leaf pack stage 2. Recommendations?

[@accutuneoffroad]

Unfortunately we don't have measurements for Icon shocks.

[@Vallero760]

Too bad thanks 👍🏽

[@jonelee9848]

Will this flip kit work with sumo spring?

[@accutuneoffroad]

No, these are not designed to work with SumoSprings

[@rookwalker]

Do you recommend front bump stops with King/fox coilovers ?

[@accutuneoffroad]

Aftermarket front bump stops are not essential, but can be a nice upgrade. If you are slamming into bump stops often, likely there needs to be valving or spring rate adjustments.

[@rookwalker]

I’m running front SumoSprings by SuperSprings (Blue) on front paired with King 2.5s
-just wondering if they may be limiting my comfortable ride? Limiting travel? They are very close to frame

[@accutuneoffroad]

Some aftermarket bump stops like those do contact the lower control arm pretty early and can certainly restrict up travel. Unfortunately I don't have data on that to confirm.@@rookwalker

[@rookwalker]

Thank you guys for the knowledge

[@tbugher62]

Almost $300 for a kit that cost $50 too make,no thanks.

[@accutuneoffroad]

$399.95 for the kit with bump stops.

[@JetSkiSuper7]

$50.00? That’s ridiculous. Please start a business, hire people, rent/buy commercial space, buy tooling/CNC machine and all other necessities.
Then, sell all your products at the cost of production.
Hey genius, you remind me of a buddy of mine that goes to a restaurant and complains about their prices-same thing.

[@tbugher62]

Total waste of money.
Your pumpkin and shock mounts are still lower,so you gain nothing by flipping your u bolts.

[@accutuneoffroad]

No problem, this kit is not for everyone.