Very nice. Would like to see an extension with lora. This would allow to use it as a tracker for cars, bikes etc. This is an alternative to GSM as it is low powered.
Hello, do you still have your code for this project? You posted this in 2019, and I have yet to find any other tutorials on how to interface an ESP32 with GPS. Your Gerber files are attached/available on Hackaday, but all other links I've found to your ESP32 code are dead or broken.
Hello, sorry but when I compile the sketch it gives me an error, maybe I don't have all the libraries installed, could you tell me all the libraries to install? Thanks.
It works with Heltec lora 32 board. (without oled, of course) Gps on Pins 16 and 17.(gps/board 16- TX/ 17-RX). When I use those pins, does this forbid(stop) me from using rx and tx commands for a board? I'm asking you because a Brazilian channel said to not use rx and tx pins on arduino to avoid problems.
On the sketch, i found code "serverIP". What do you mean with it? in my country, I only fill APN, USERNAME and PASSWORD. What should I fill to the serverIP?
Hello, great project congratulations! I would like to know if I use the NEO-6M GPS module instead of the Reyax GPS module does it work the same or not? Is the voltage to use for the GPS module 3.3V? Thanks.
I noticed that most of the links to your hardware are all out of date or they don't work. Maybe you could have all of your links be solid and maybe to the same site for purchasing? Speaking for myself, if all of those links were solid and i didnt have to spend hours and hours trying to figure out where to find all of the components beecause you havent made a detailed list of them, then i would love to make a handsome donation to your video.
You can't. That is why he suggested adding a GPRS module so it can connect to a server on the internet to relay the latitude and longitude information. Once you have that information, you can map the data on a map.
Hey , good day . To accomplish this you have to add two value display for lat and long. If u want u can also add more for getting satelites,speed and direction..Thats upto you. Then configure the value displays by setting their pins as any virtual pins. In the code add the libraries necessary for blynk. In the code look for the part where you are getting the readings from the gps module..lets say its latitude and longitude respectively..use the following code latitude = (gps.location.lat()); longitude = (gps.location.lng()); Blynk.virtualWrite(V1, String(latitude, 6)); Blynk.virtualWrite(V2, String(longitude, 6)); Yeah thats it..i am using a neo 6m..if ur gps module is different change code accordingly..Hope this helps..if u have any doubts i am free to help. Plus i have a yt channel where ive made a video using nodemcu esp8266 and neo6m.. u can refer that th-cam.com/video/glUIflSFHWM/w-d-xo.html
Im doing ur project as my college final year project and my sir asked me to do an program based project...so im asking u the program for gps tracker circuit
@@josefranciscomartinezramir7877 i know..ive made the same thing which displays the lat and long in blynk app..if u want i can share the code and guide you
bonjour ; peut tu m'aide je voudrai ajouter une carte sd ( pour du paramoteur ) peut tu l'ajouter a tous code merci th-cam.com/video/uz8u4VymQiw/w-d-xo.html Hello ; can you help me i would like to add a sd card (for paramotor) can you add it to any code thank you
Very nice. Would like to see an extension with lora. This would allow to use it as a tracker for cars, bikes etc. This is an alternative to GSM as it is low powered.
Hello really a great job. is it possible to put the device on battery for more mobility? what would then be its autonomy? thank you Michael
Your Github link not access
Very useful. And your video was easy to watch. Thank you
Share the video and consider subscribing to my channel for more videos like this!
@@CETech4u subscribed.
Easy to watch but not easy to follow along.
Hello, do you still have your code for this project? You posted this in 2019, and I have yet to find any other tutorials on how to interface an ESP32 with GPS. Your Gerber files are attached/available on Hackaday, but all other links I've found to your ESP32 code are dead or broken.
could you help me find the gps module online ? i cant find it anywhere
Do I need to have wifi connection all time in order to use this project?
nice work CETech. can you extend it adding a gprs module (SIM808) so that location are sent realtime to a server?
Hello, sorry but when I compile the sketch it gives me an error, maybe I don't have all the libraries installed, could you tell me all the libraries to install? Thanks.
Good work mate, keep it up
It works with Heltec lora 32 board. (without oled, of course) Gps on Pins 16 and 17.(gps/board 16- TX/ 17-RX). When I use those pins, does this forbid(stop) me from using rx and tx commands for a board? I'm asking you because a Brazilian channel said to not use rx and tx pins on arduino to avoid problems.
On the sketch, i found code "serverIP". What do you mean with it? in my country, I only fill APN, USERNAME and PASSWORD. What should I fill to the serverIP?
Hello, great project congratulations! I would like to know if I use the NEO-6M GPS module instead of the Reyax GPS module does it work the same or not? Is the voltage to use for the GPS module 3.3V? Thanks.
Yes you can, you just need to take care of voltage logic level
is it want network connection for finding location?
Nope
OK thanks! Does the sketch stay the same or does it need to be edited using NEO-6M?
Same
Is it possible to modify the software so it can send the data to an mqtt server?
How do you track ?
Is there a design reason you has to use the relatively expensive FireBeetle ESP32 for this project?
No particular reasons. Just had that lying around :p
can you read the log data into sd card to ?..can you making the code?
Can I get the form of a circle connection?and the code
Where I can get the code?
Oi tudo bem ?. Eu não estou conseguindo acessar o link do módulo GPS. Tem como você disponibilizar o link de novo por favor ?
English?
Hello all well ?. I am unable to access the link to the GPS module. You can make it available the link again please?
Why include and "QmuTactile.h" is not fund?
Download these libraries: github.com/DzikuVx/QmuTactile and TinyGpsPlus github.com/mikalhart/TinyGPSPlus
Are you from Barshi, Maharashtra
No
sir can we have a video on lora with gps
Its coming up this Sunday!
Please I beg you do that but with a SIM5320 in south america doesn't work 2G network :(
Watch the A9G video on my channel
Can i get the entire set with soldered components?
You can drop us an email for this
@@CETech4u email id pls?
It should be in the video description
@@CETech4u thanks, have sent the mail
Because they arent clearly listed.
Hello will I be able to contact with you..??
Just use ttgo call esp32 sim 800l, im developing the same project.,the board featured with sim card that support internet wifi
Did your device work
@@Doityourself567 yes, the device had its internet plan, no wifi needed
Very nice ♥
Do consider subscribing to the channel for more content like this!
is it possible to maKE IT IN A BRREAD BOARD
Yes
I noticed that most of the links to your hardware are all out of date or they don't work. Maybe you could have all of your links be solid and maybe to the same site for purchasing? Speaking for myself, if all of those links were solid and i didnt have to spend hours and hours trying to figure out where to find all of the components beecause you havent made a detailed list of them, then i would love to make a handsome donation to your video.
So what did you track and how can you find the location lat long when you put your gps nodemcu module in your car and while your car is stolen?
You can't. That is why he suggested adding a GPRS module so it can connect to a server on the internet to relay the latitude and longitude information. Once you have that information, you can map the data on a map.
Download these libraries: github.com/DzikuVx/QmuTactile and TinyGpsPlus github.com/mikalhart/TinyGPSPlus
hey! How do i make this setup send data to my blynk app?
Hey , good day . To accomplish this you have to add two value display for lat and long. If u want u can also add more for getting satelites,speed and direction..Thats upto you. Then configure the value displays by setting their pins as any virtual pins. In the code add the libraries necessary for blynk. In the code look for the part where you are getting the readings from the gps module..lets say its latitude and longitude respectively..use the following code
latitude = (gps.location.lat());
longitude = (gps.location.lng());
Blynk.virtualWrite(V1, String(latitude, 6));
Blynk.virtualWrite(V2, String(longitude, 6));
Yeah thats it..i am using a neo 6m..if ur gps module is different change code accordingly..Hope this helps..if u have any doubts i am free to help. Plus i have a yt channel where ive made a video using nodemcu esp8266 and neo6m.. u can refer that th-cam.com/video/glUIflSFHWM/w-d-xo.html
I did all the steps, but the Lat, Lon, etc are always 0 :(
Wait for it to get stable and move the setup outdoors
I needProgram for this project?
Can you please elaborate on the doubt?
Im doing ur project as my college final year project and my sir asked me to do an program based project...so im asking u the program for gps tracker circuit
pls send the code or code link
Hey bro can you programm ttgo tcall
Did you know how to program ttgo tcall???
@@josefranciscomartinezramir7877 i know..ive made the same thing which displays the lat and long in blynk app..if u want i can share the code and guide you
Pro
Hi PCB design order
Meaning?
bonjour ; peut tu m'aide je voudrai ajouter une carte sd ( pour du paramoteur ) peut tu l'ajouter a tous code merci
th-cam.com/video/uz8u4VymQiw/w-d-xo.html
Hello ; can you help me i would like to add a sd card (for paramotor) can you add it to any code thank you
I know where is your house
Come over! Lets grab a coffee together :)
@@CETech4u you mean ganja?
Hey, I noticed that you are interested in ESP32. We just released a video on ESP32. Thought you'd want to check it out. Thanks
👇👇👇
utm.io/um5S
Thank you!!! Thank you!!! I needed it for work, so your step by step easy use instructions helped! You're a lifesaver *Meshtoolz.* .
Thank you!!! Thank you!!! I needed it for work, so your step by step easy use instructions helped! You're a lifesaver *Meshtoolz.* .
Meshtoolz?