When programming the ESP32 board, the jumper on the FTDI USB board must be placed on 3.3V! You must change (or check) if the 0 ohm resistor is placed correctly to use the external antenna. You should remove the plastic in front of the camera lens!
Is removing the plastic compulsory? I don't think it would stop the cam from working...? I was actually unable to make it work, and i also didn't removed it's cover yet...just so that I can return it, incase
Great Tutorial have following questions : Q> How good is ESP32 Cam ? What is the pixel value of the images (Layman's terms would I be able to recognize faces) Q. How good is your case for external use ? Q. What does the Blynk do ? Q. How can I set-up the UI on my computer screen instead of a phone.
The Blynk software is an IoT server on the internet so you could access the board remotely (not to be confused with Amazon's Blink cameras). Blynk is free for 2 devices, $7/mo for 3 users and 10-20 devices. Blynk also seems to offer compiling and "low code" drag-n-drop coding.
@@wandaniel4596 Even if you attach an external antenna, the ESP32 will still use the built-it one until you move the sma resistor to a new position. Just google for "esp32-cam antenna resistor"))
Hi, I'm searching for a way to connect a microphone to this board and stream the audio together with the video. Or would the esp32 be to slow for that??
I am not sure if your "anteena" is working. I'm pretty sure you didn't modify the cam board to enable the external "anttena" It looks as if only the onboard "anteena" is enabled.
To use an external antenna, just move the resistor next to the connector from the / position to the \ position. It is a 0 ohm resistor so you can just use a solder bridge from point to point if you want.
Dude, you forgot to switch the 0 ohm resistor from internal antenna to the external port, my guess is that your pretty little antennas are not working and all of the traffic has been handled by the onboard ones. Also If I were you i would have printed the cases a bit different, i would put a standardized power connector, like microUSB or a barrel jack, when you are leaving the pins exposed like that you are leaving room for error and i bet connecting the DuPont connectors, wrongly won't be so good for the boards. :)
Great video. Many thanks for your explanation. I had some problems. Led flash blinks continuously (don't know why); I had to change board to AI_Thinker board to load correctly the program. And, finally, don't know to finish app in Blink. Anyway, thanks again.
I didn't see you demonstrate a live stream, which is kind of a main point if I want to use a VIDEO kamera. If this is only a SNAPSHOT kamera, then I don't see the point in putting it up. Plus, telling us what is the frame rate and size that we can expect would help us a lot.
I need a long-term timelapse 30fp per day during 10/11 months without maintenance and charge. I did't find anyone did it before. Any recommendation? Thanks
Is there a video cam which can work like CCTV and continously monitor. Because here it will just click photos. So if we want to display the live stream in blynk then is it possible?
Thank you sir for the great tutorial, may I ask if you have a 3D printing design without external antenna? If so, would you mind sharing it? BTW you got my sub♥️
super cool app, but I think you should add a field where you can add the IP address to each cam or let the app add it by itself for live stream within the app
Thank you for the Project. I have following queries: 1.Can this be used from a diffrent location (WAN) or only within same network only? 2.How to resolve the problem of changing IP address for live stream. IP address changes everytime I resume power. Thank you!
Very, Very interesting, Fast and clear description of How to do very interesting thing with 2 eps32-cam
The fact that you don't remove the plastic protector from the lenses and using the cameras with it, hurts my brain.
Great project. The icing on the cake would be a battery powered solution (lipo) so that the camera is totally wireless
@Greggy Ramirez No but based on what you say should I be looking?
@Greggy Ramirez I would look into Lithium Ion technology, e.g., 18650/21700 cells. They are safer than lipos and have a higher energy density.
the icing on the cake would be having clear video and not 3 choppy frames per second
When programming the ESP32 board, the jumper on the FTDI USB board must be placed on 3.3V! You must change (or check) if the 0 ohm resistor is placed correctly to use the external antenna. You should remove the plastic in front of the camera lens!
Is removing the plastic compulsory?
I don't think it would stop the cam from working...?
I was actually unable to make it work, and i also didn't removed it's cover yet...just so that I can return it, incase
@@HarshitSingh-mg7zt i got it to work, what's your problem I might be able to help
@@cdbetten7188 thanks😊
But I sorted it out myself already
Actually, my board was faulty, so i replaced it, and it worked first try! :)
@@cdbetten7188 What antena do u use?
Hello, I think you forgot to change the resistor position to use the external antenna. You have to put it in the direction of the antenna.
Great Tutorial have following questions :
Q> How good is ESP32 Cam ?
What is the pixel value of the images (Layman's terms would I be able to recognize faces)
Q. How good is your case for external use ?
Q. What does the Blynk do ?
Q. How can I set-up the UI on my computer screen instead of a phone.
1600x1200. Just use a webbrowser. Blink is just a LED light for illumination of dark rooms in the night.
The Blynk software is an IoT server on the internet so you could access the board remotely (not to be confused with Amazon's Blink cameras). Blynk is free for 2 devices, $7/mo for 3 users and 10-20 devices.
Blynk also seems to offer compiling and "low code" drag-n-drop coding.
You have to change a resistor to another position to work with the External Antenna not with internal Antenna
True, I was about to comment this
Can you explain more about this?
External Antennas are useless in this project. Yo missed the configuration brother.
Pls anyone explain more about this
@@wandaniel4596 Even if you attach an external antenna, the ESP32 will still use the built-it one until you move the sma resistor to a new position. Just google for "esp32-cam antenna resistor"))
Are the pictures stored somewhere, or will they be overwritten? ??
Great project! I wonder is not needed to soldier some pins to enable the out antenna?
Adding an external aerial you need to move the position of the 0 ohm resistor next to the aerial socket.
Where can I find the STL for the camera case you use?
Without seeing the video, I can tell this is a great project, just by looking at the casing of the camera.......THIS IS SUPERB!
Why do you have the antennas oriented like that?
Will this work with an OV7725 camera?
Hi, I'm searching for a way to connect a microphone to this board and stream the audio together with the video. Or would the esp32 be to slow for that??
Good idea!
it's hard to get a proper stream out of these.
Hi Can You please tell the 3d printing configurations, infill, Material & nozzel size...
Sir can we make this project without antenna
it will work only if phone and camera in one wi-fi net or via internet from any poin world?
Would this set up be able to stream locally over a wifi network from a router but no actual internet signal/data?
What did you use to power the esp32 ? I think that I saw extern battery, which model did you use, and how ? :D
USB powerbank. Is 5V
You are the king I was just going to do it bro
I am so happy to see great demo, CAN YOU PLEASE LET ME KNOW WHARE I CAN PROCURE THE BORDS. THANK YOU ONCE AGAIN.
I am not sure if your "anteena" is working. I'm pretty sure you didn't modify the cam board to enable the external "anttena" It looks as if only the onboard "anteena" is enabled.
I was thinking the same. You need to move the zero ohm resistor beside the antennae to the other position. Thanks for video.
What software are you using there?
Hello. Great video!!! With the power bank, how many time it's operative? How much time it's power on?.
great tutorial but you flick around the screen so quick its very hard to keep track of what your doing.
Is it possible if I am far from the camera and want to see live footage?
To use an external antenna, just move the resistor next to the connector from the / position to the \ position. It is a 0 ohm resistor so you can just use a solder bridge from point to point if you want.
Dude, you forgot to switch the 0 ohm resistor from internal antenna to the external port, my guess is that your pretty little antennas are not working and all of the traffic has been handled by the onboard ones. Also If I were you i would have printed the cases a bit different, i would put a standardized power connector, like microUSB or a barrel jack, when you are leaving the pins exposed like that you are leaving room for error and i bet connecting the DuPont connectors, wrongly won't be so good for the boards. :)
Can we hear around sound room and what is range distance maximum ?
Hope you get 100 k subs as fast as possible
Thankyou, keep supporting😃
Can both the cameras stream simultanously?
Can it work in jammers?
Can i control multiple smart plugs which is connected to different WiFis from the cloud or blynk app
combien la porté maximale
Great video. Many thanks for your explanation. I had some problems. Led flash blinks continuously (don't know why); I had to change board to AI_Thinker board to load correctly the program. And, finally, don't know to finish app in Blink. Anyway, thanks again.
can conect this module direct on our mobile? without internet?
Hey!!did you put inside the FTD.
Where can we get camera case any link? Or something else?
Awesome project .. thank you
How much range is increased with antenna
hi
does it can record the film?
Can it show anywhere over internet??
I didn't see you demonstrate a live stream, which is kind of a main point if I want to use a VIDEO kamera.
If this is only a SNAPSHOT kamera, then I don't see the point in putting it up.
Plus, telling us what is the frame rate and size that we can expect would help us a lot.
Hey i bought a esp32cam board but my camera looks different and flatter. What is the camera model you use ?
Can I use this for my drone
Hi, can i record all the ESP32 camera videos into the phone memory so i can playback later?
Nice project! It is possible to shot both cameras at the same time?
What is that app in your phone?
what is the software that you used to in 0:40 ?
Can this project control live stream video???
I need a long-term timelapse 30fp per day during 10/11 months without maintenance and charge. I did't find anyone did it before. Any recommendation? Thanks
How to i add more esp32 cam module to the code
Hey bro, Should I remove the resistor before connecting the antenna? please help!
1 felicidades por tu proyecto luego comentarte si vas hacer el video con la nueva app blynk
The images are not smooth and buffering quite a bit...any plans to upgrade the cameras with video recording?
I like your video. Thanks you
Which 3D printer do you use? can you share the experience or details
Hello. I want to know what is the RECORDING mode, if it detects movements of people and what is the duration of the recording?
Yes you have to unsoldered existing position int to connect 0 ohms resistor to ext.Thanks to Dronebot
is it possible to add 2-way audio?
Does this code work for esp8266
Is there a video cam which can work like CCTV and continously monitor. Because here it will just click photos. So if we want to display the live stream in blynk then is it possible?
Can u suggest a method to make it view over wan
How do you find the low light performance?
Thank you sir for the great tutorial, may I ask if you have a 3D printing design without external antenna? If so, would you mind sharing it? BTW you got my sub♥️
What printer do you use??
Can you measure the maximum current drawing at 4V when transmitting the video stream? Thank you
Is blynk app free to use? If not what is the limit they put to use free maximum buttons?
Hi VS. I followed every step of your tut but came up with "Blynk' was not declared in this scope"
What am I doing wrong?
Thanks
Can we use jumper wires?
super cool app, but I think you should add a field where you can add the IP address to each cam or let the app add it by itself for live stream within the app
Thank you Man🌹🌹
Can I use ESP32-Cam-MB instead of FTDI 232 Module in this project?
Where can i get those cables to power it from powerbank
Or how can i make it
is it possible to add buttons to turn the camera on/off? what would the coding be like?
good morning bro. With this can i record videos on my mobile phone, cause i want to use it on my drone.
Sir kya mobile se programming kr sakte hai kya
In blnk i am still looking for image gallery that you resized. Why mine is hiden? Is blynk work in offline?
Very nice
ESP 32 hot temperature , it consumes a lot of power, is there a way to reduce its power consumption?
Where are the pictures stored???
Good day sir .
We can stream and you can listen?
Using esp32Cam?
the external antenna won't work if you don't change the resistor placement next to the PCB ant
where I get the antenna?
Your project is amazing
That was amazing sir awesome
So...
How would you connect to the http address from a different network?
You open an external port on your router. Port forwarding.
Thanks for a great project. How would you send the picture in an email for your record?
I've been looking for coding on your website but all I get is different coding, I hope you can share the appropriate coding in the video
What to do if i want to add more than 2 cams
Thank you for the Project. I have following queries:
1.Can this be used from a diffrent location (WAN) or only within same network only?
2.How to resolve the problem of changing IP address for live stream. IP address changes everytime I resume power.
Thank you!
Hello. I really like the CAM-MB MICRO USB ESP32 boxes. Do you mind if you provide me with the printer project?
Bro antenna is necessary or we can use with antenna
Not necessary
What is the range of this?
Very nice. Good job
Bro for me it says in line9 that BlynkSimple not found
Please help
Muito legal.
What's the FPS on the stream
I want to reinstall programming in my this esp32 cam from new point bcz some features r not working so what I need to do ?
I have question bro
is that possible using any Arduino board(UNO/NANO) instead of TTL Programmer??
Yes