Suzuki GT125 twin (1975)

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ส.ค. 2020
  • We decide to fire up the young sister of the gt185 after being stored for a long time. We strip the carbs down and clean them in the ultrasonic cleaner.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 15

  • @alainsyon2045
    @alainsyon2045 3 หลายเดือนก่อน +1

    Excellente vidéo

  • @spiderdad00
    @spiderdad00 3 ปีที่แล้ว +2

    so many memories i had a 185 loved it

    • @peteramberley9952
      @peteramberley9952  3 ปีที่แล้ว +2

      Great little pocket rockets big up grade from a moped

  • @keithwestworth9840
    @keithwestworth9840 3 ปีที่แล้ว +1

    These bikes are so much fun two ride they need two put them back on the market for production

  • @gardini100
    @gardini100 3 ปีที่แล้ว

    I had a 100 as my first bike back in the late 80s only one pipe :) but I had lots of fun with it both outside the garage and inside :D

  • @iwishcolincampbell1541
    @iwishcolincampbell1541 ปีที่แล้ว

    2 loverly bikes

  • @TroyHobbs-um2cf
    @TroyHobbs-um2cf ปีที่แล้ว +1

    I have 1 off theys in OK conditions bur not running can you give me a rough price pleas

  • @malcolmcroll
    @malcolmcroll 2 หลายเดือนก่อน +1

    i have the same modle -from new but has no spark just like yours was ;what did you do get it to fire -up please ;;

    • @peteramberley9952
      @peteramberley9952  2 หลายเดือนก่อน +1

      You need to go thru the electrical system.check points are clean ,check you have voltage at the points,and condenser .then check your coils.probley points corroded.

    • @malcolmcroll
      @malcolmcroll 2 หลายเดือนก่อน

      @@peteramberley9952 manythanks for your help ;i will go thru it like you say -its like hit & miss -

    • @malcolmcroll
      @malcolmcroll 2 หลายเดือนก่อน

      @@peteramberley9952 sorry to bother you ; i have found that no power is going to the condeners ,all lights & horn work "ect" ;battery ok ;any idea please thankyou ;;

    • @peteramberley9952
      @peteramberley9952  2 หลายเดือนก่อน +1

      @malcolmcroll the condenser absorbs voltage.disconect the condenser and check the voltage at the points.if you don't have a live you need to trace it back to the ignition coil.get a continuity tester on a muilty meter and check for breaks or bad conections / grounds

  • @glynees
    @glynees 3 ปีที่แล้ว +1

    Is this single cylinder or what?

    • @peteramberley9952
      @peteramberley9952  3 ปีที่แล้ว +3

      Sorry but I don't know how to answer your question without being sacastic