This is fantastic!! I need to make something like this...our huge plastic crate is am eyesore. Time to get a pocket hole jig amd clamps!!! Thanks so much for sharing :)
You are so amazing, what a gift. I wish you were local been trying to find a trusted person to build me what you just did for my pet grooming shop, I love it.
Check the updated link in the description for details about the crate. This one is too small for a full grown Husky, but you could easily change the size to accommodate.
Well, this can be adapted to a limited tool build. Instead of a table saw, all the cuts could be made with a circular saw, or even a hand saw if you have the time and endurance. Instead of using pocket holes, you could add an extra 1x3 board around the window area to create a rabbet-type lip for the kennel bars to sit on and just glue and screw them down. Or you could make a pocket hole jig by drilling angled holes into some scrap wood.
WOW How much do you charge for you to make me one? Seriously, I really need a dog crate and I love the concept! Do you have a website where I can buy one from?
Awesome builder & cute chubby dog (not to offend) anyone. My shih tzu needs to gain a little weight, she's only 7lbs...she eats well, usual portion but hardly gets heavier than 7lbs.
Need to make one for my Tibetan Mastiff when he comes. Awesome job I think I'm motivated to get the kreg jig - can I use non kreg screws? I would think so but I see that you may have used then.
Would he fit Becuase you know a Tibetan mastiff they are really big just saying but can't wait till you get him I hope you love him to bits and he does back :)
Omg. I love this.... I would love for you to make me one exactly like this and ship it to me. Would you do that?? Or do you only show tutorials. I wouldn't know the first thing about even being able to use a hammer
I have built a few for other people. The problem is that they are too big to ship. So you would have to pick it up or I can ship pieces and you would have to assemble it.
Can you please give me the materials list and like I need 22 1.5 X 3/4 cut and need 4 boards that are 3.5 X 3/4 that are 43 inches long And the size of board we need for the top and bottom. Thank you
cory warren All the wood is 3/4 inch thick. Outer frame is 3.5 inches wide, door frame is 2.5 inches wide all the other pieces are 1.5 inches wide. Bottom and top are 3/4 inch plywood.
GORGOUS top! I would have not painted the rest white, though. That top would have looked better with stained wood, in my opinion. I get that its to match decor but, use a white painted top or make a top that goes with white. I just didnt think that top went with the rest of the wood. I also would not put wooden slats on a dog crate as, even with dogs that are not normally anxious can become super anxious over something unexpected and not under your control and chew on it possibily hurting themselves. i know these are unbelievably expensive to buy and WAY cheaper to make but I would put metal rods down the sides, not wooden slats, just for saftey but thats just me. It is nice!
your dog looks overweight you should take it to the vets...you must be feeding it too much.my friends got a corgi that used to look like that because it was overweight...since going to the vets it's doing well
Tamar Pink That's straight to the point if not mistaken by pregnancy weight. My shih tzu is only 7lbs which I think she's to slim but the vet saids that's a healthy weight (she's not all bone showing). She eats, drinks and goes on normally. I'm trying to have her gain some weight by giving her little more food than her portion. However she doesn't eat everything. Maybe some dogs have bigger appetite or will eat everything that's offer. Also lack of exercise could contribute to gaining weight too besides just food intake. I'm not trying to cut exercise from my dog just so she'll put on some lbs.
LoversLane Hawj at a good weight you should be able to feel the pets ribs but not see them. If your vet said the weight is a healthy weight then you should probably listen to them and not over feed. If you don't believe the vet then get a second opinion from a different one and if they still say your pet is at a healthy weight then you should definitely listen. Additional weight can cause problems as we all know.
Awesome CRATE! The pups love their Crates will run and get in them!
This is fantastic!! I need to make something like this...our huge plastic crate is am eyesore. Time to get a pocket hole jig amd clamps!!!
Thanks so much for sharing :)
The best and simplest one ive seen made. Thank you.
they way you put on the wood bars was genius!
This is the best dog kennel ive ever seen. Great job!
Thanks for posting this and providing the plans, easy build to follow
Made a couple of these. Using the 1x2 slats looks so much better than the round rebar/dowel 'doggie jail' look..
I can't wait to make this with pallets! Ty for tutorial
Corgis are such cute little loafs of fur.
Beautiful work! Thank you for sharing.
holy crap what are you feeding that dog ?
You are so amazing, what a gift. I wish you were local been trying to find a trusted person to build me what you just did for my pet grooming shop, I love it.
Rose Weng Where are you located?
good job. I love it!!!!!! I need 3 of those, two that size and one for my 5 lb Yorkie. Love your Corgi!
I am going to make something similar for my dog, though probably twice as big haha. He's huge.
What are the dimensions of this crate? Would a full grown husky will fit in this? You did an awesome job! And I love the letter on the door!
Check the updated link in the description for details about the crate. This one is too small for a full grown Husky, but you could easily change the size to accommodate.
I love that bed I need to buy a bed for my cute puppy
man I just wanna know how to make a simple dog kennel or crate for my smaller dogs without all them tools you're using just trying to make it by hand
Well, this can be adapted to a limited tool build. Instead of a table saw, all the cuts could be made with a circular saw, or even a hand saw if you have the time and endurance. Instead of using pocket holes, you could add an extra 1x3 board around the window area to create a rabbet-type lip for the kennel bars to sit on and just glue and screw them down. Or you could make a pocket hole jig by drilling angled holes into some scrap wood.
If I gave you dimensions could you make me just the door. I have a built in area that I can turn into a dog crate by just adding a door
Really neat! 👏
How much would that cost me if i made someone do it ?
Thank you! And thank you for you're video. Excellent work
I love this DIY
Nice! 👍👍👍👍
Thanks! 👍
What size pocket screws did you use for the corners?
this is awesome! exactly what I was looking for. thank you!
good build i build a metal one but it took a month !!!!
Can u make a adult huskey bed
i like it
WOW How much do you charge for you to make me one? Seriously, I really need a dog crate and I love the concept! Do you have a website where I can buy one from?
Awesome builder & cute chubby dog (not to offend) anyone. My shih tzu needs to gain a little weight, she's only 7lbs...she eats well, usual portion but hardly gets heavier than 7lbs.
good job
What is the device called that you use to place the drill into for the holes to be on an angle? I love this and am trying to make my pup one.
Emily Richardson It's called a pocket hole jig, made by Kreg.
Need to make one for my Tibetan Mastiff when he comes. Awesome job I think I'm motivated to get the kreg jig - can I use non kreg screws? I would think so but I see that you may have used then.
Yes you can use any type of screw that will fit.
Would he fit Becuase you know a Tibetan mastiff they are really big just saying but can't wait till you get him I hope you love him to bits and he does back :)
+Jordie 2131 might be a pup
+Jordie 2131 i have him already. 6 months already and weighs 73lbs.
Omg. I love this.... I would love for you to make me one exactly like this and ship it to me. Would you do that?? Or do you only show tutorials. I wouldn't know the first thing about even being able to use a hammer
I have built a few for other people. The problem is that they are too big to ship. So you would have to pick it up or I can ship pieces and you would have to assemble it.
Can you please give me the materials list and like I need 22 1.5 X 3/4 cut and need 4 boards that are 3.5 X 3/4 that are 43 inches long
And the size of board we need for the top and bottom. Thank you
I like that thank you for hleping me
This dog looks similar to my cousins' dog. My...cousins' dog passed away...
yes yes
That is great! What measurements of wood did you use? I like the technique I am making a extra long gate on the same principal
cory warren All the wood is 3/4 inch thick. Outer frame is 3.5 inches wide, door frame is 2.5 inches wide all the other pieces are 1.5 inches wide. Bottom and top are 3/4 inch plywood.
+Making Stuff whats your prices? and if you sent in pieces would you have step by step how to assemble correctly? or what pieces of wood could i buy?
+Nickle Alexander See link that I have added in the video description.
but how long are the piece? I went to the making stuff and it just sends me back here
+Gina Erdmann www.makingstuff.info/Projects/10/WoodenDogCrate.aspx
wow...if only I could do thst on 20 minutes too.
corgiiiii!
GORGOUS top! I would have not painted the rest white, though. That top would have looked better with stained wood, in my opinion. I get that its to match decor but, use a white painted top or make a top that goes with white. I just didnt think that top went with the rest of the wood. I also would not put wooden slats on a dog crate as, even with dogs that are not normally anxious can become super anxious over something unexpected and not under your control and chew on it possibily hurting themselves. i know these are unbelievably expensive to buy and WAY cheaper to make but I would put metal rods down the sides, not wooden slats, just for saftey but thats just me. It is nice!
I think the white makes the natural wood top stand out.
grate job !!!
That's so hard
Do you have plans
No
How much would it be for you to make me one off them
+PINK WORLD Go to the Making Stuff website and send a comment, I'll reply via email.
+Making Stuff I cant get on the website so what should I do?
PINK WORLD
www.makingstuff.info/contact.aspx
thanks please subscribe because I only have 16 subscribers
+Making Stuff I have sent you a email
What kind of dog is that?
He is a Welsh Corgi.
+Making Stuff i wish the lengths of everything were in the video!😧😕 not really in depth so not what i was looking for😧😕
It's a Pembroke Welsh Corgi(corgi means dog)
It's very tuff
My dog is a Shih Tzu
Noah Harris I have a shih tzu too...aren't they adorable.
Plans to build?
+Kleo 84 See link that I have added in the video description.
Cool concept, just feel if you puppy is a chewer this maybe a wrong choice. I like it though.
+DJ Outlandish Luckily none of my dogs are chewers.
+Making Stuff Is that corgi kinda big or do u guys feed him/her a lot?
We put him on a diet shortly after I shot the video. He has lost 8 pounds and is a normal weight now for his size.
+Making Stuff oh ok. Awesome video though
Making Stuff
Nice!
Glad you liked it. Thanks for watching!
What you called the black thing for installing the door?
The hinges and hasp are black. Hope that answered your question.
Making Stuff thankyouu
the link doesn't work
I just tried the link in the description and it works fine. See if it works for you now.
I don't know what to use because you didn't show us what size to use gosh
+vitiVgames The answer you seek is in the video description.
can you make a baby bed
rebornlover 95 yes I can
zaria moore
Dontia Mack
What was the cost of all the wood?
Every time I click on a video on how to make something, I am cautious. Thanks a lot, HowToBasic.
Thanks for watching!
A Chinese lion dog
I made it 501! I am so evil XD
I heard about woodprix instructions good opinions.
me too!
4:41 there's blood on that wood
It's red paint from the Man Cave Arrow video.
🐕🐩🐺🐶🐻🐺🐶‼‼‼‼‼‼‼‼‼‼
I made this for my pet bunny but it was a bit bigger 🐰
I have a German shepherd puppy
I know Stodoys has the best woodworking plans.
make a dog food container
your dog looks overweight you should take it to the vets...you must be feeding it too much.my friends got a corgi that used to look like that because it was overweight...since going to the vets it's doing well
Tamar Pink That's straight to the point if not mistaken by pregnancy weight. My shih tzu is only 7lbs which I think she's to slim but the vet saids that's a healthy weight (she's not all bone showing). She eats, drinks and goes on normally. I'm trying to have her gain some weight by giving her little more food than her portion. However she doesn't eat everything. Maybe some dogs have bigger appetite or will eat everything that's offer. Also lack of exercise could contribute to gaining weight too besides just food intake. I'm not trying to cut exercise from my dog just so she'll put on some lbs.
LoversLane Hawj at a good weight you should be able to feel the pets ribs but not see them. If your vet said the weight is a healthy weight then you should probably listen to them and not over feed. If you don't believe the vet then get a second opinion from a different one and if they still say your pet is at a healthy weight then you should definitely listen. Additional weight can cause problems as we all know.
that dog looks overweight :/
ograsin her cur taxtasi var eee
What size pocket screws did you use for the corners?
Don't remember. It's been a while since I made that video. Thanks for watching!