"The wife" oh boy Looks good its a awesome design. To distress it because the wood is so light, its worth painting underneath. Or you can stain. Then as you knock it back you have layers of the top layer, the stain or paint and the natural wood. More layers of paint the better. I really like the mesh you used. Thanks for the video.
Excellent Job my friend and great choices for decorating the wood to dress it up like wainscoating and the trim around the wire mesh was a fantastic idea. Keep the videos coming
Thank you for watching! Remember my shop wasn’t always like this. But I’ve invested a lot of tome and money to slowly make it what it is. I still need to improve sooo much, but I’m definitely grateful for what I have today
Great work, I love your attention to detail. The strips between the fence and router is genius. I would have moved the fence over probably screwed up the dado.
Haha thank you so much! I cannot tell you how many dados I screwed up before I saw someone doing that just to make the dado a bit bigger. I appreciate you watching and leaving a comment 😊
Wow I wish I saw this before I built mine haha. I didnt have the best tools and supplies but it came together VERY similar to yours. I did the removable dividers too. I made a 3 dog kennel with 5 cubby lockers on top inside of my entryway closet, with a bench. Mine looks very amateur but still very nice for a beginner. Still wish I've seen this video a few months ago lol .
How does this video have so few views? This is an excellent idea, design, build and video. Very nice bro. Improvement idea (figure out a way to add casters to make it easier to move around the house). Good job!
Im not sure how this came on my TH-cam with so few views but this is beautiful. Great work both on that and the video editing as well. You got another sub
Expensive but so worth it. If I didn’t it again, I would get the smaller domino. I bought the big one because I friend talked me into it but I think the small one is more applicable
Hey bud I just saw your video. Great job. Where in Texas are you at? I would love to purchase one for my 3 dogs as well, but with sliding farm doors. I’m in Texas too by the way
I can't find that wire mesh. Where did you get it? I am going to make one similar to yours for my daughter and her two small dogs. Love the look of the mesh.
I LOVE this. Someone else.asked.the cost of this and you referred to the website but I don't even see this on their. How much would this be with no divider?
Alex, this is a great video and very descriptive thank you for sharing. I have a few questions for you: 1) What was the depth of the rabbits that you used for the recessed panels on the sides of the kennel? 2) What was the depth that you used for the rabbit on the areas where you used the expandable metal mesh?
Thank you so much. Definitely not a master but I appreciate the complement. I believe this build was around $1500 delivered to the clients house 😊 Thank you so much for watching the video
Alex, did you attach the wire mesh to the wood before you put in the mitered framing on the inside of the crate? If you did attach it, what did you use to attach the mesh?
Thank you so much for watching! I use an old Canon T5 I got a couple of years ago. I have a free sketch up file on my website if you need something to reference for your build 😀
Haha wow great eye! That drawer slide is messed up so it doesn’t hold the drawer. Plus I’m pretty sure my cabinet is not perfectly level.... or it could’ve been someone that did it...... (cue scary music)
@@arayawoodworks #9 is 0.3” thick and #18 is 0.164” thick, and #13 is 0.225”. Which of these would you use? And thanks for your professional opinion, I appreciate the guidance
"The wife" oh boy
Looks good its a awesome design.
To distress it because the wood is so light, its worth painting underneath. Or you can stain. Then as you knock it back you have layers of the top layer, the stain or paint and the natural wood. More layers of paint the better.
I really like the mesh you used.
Thanks for the video.
Excellent Job my friend and great choices for decorating the wood to dress it up like wainscoating and the trim around the wire mesh was a fantastic idea. Keep the videos coming
Thank you for watching and sharing! This project was really fun
This my favorite dog kennel design! I even ‘purchased” the related items to this on your website to potentially build myself for my three dogs!
Awesome! Thank you for watching 😀😀
My husband uses these plans from Woodprix and is very happy with them. However. I love yours!
Awesome video. I will be assembling this dog kennel as the base + 2 rows of drawers for my son's bedroom. Dog + dresser combo for bedroom.
Awesome! Thank you for watching! That is a cool design combo
Really great design, Alex. Your choices for details and the finished work are the best I've seen. Thanks for the video.
Thank you so much! 😀
That's beautiful! I'd love to have a workshop like yours!
Thank you for watching! Remember my shop wasn’t always like this. But I’ve invested a lot of tome and money to slowly make it what it is. I still need to improve sooo much, but I’m definitely grateful for what I have today
This is awesome!!! I’m looking to create something just like this. Great job and thank you for the video. Very informative.
i'll subscribe as a fellow woodworker from TX (Houston
Good stuff! Thank you for the sub
Great work, I love your attention to detail. The strips between the fence and router is genius. I would have moved the fence over probably screwed up the dado.
Haha thank you so much! I cannot tell you how many dados I screwed up before I saw someone doing that just to make the dado a bit bigger. I appreciate you watching and leaving a comment 😊
Great job, looks awesome!
Thank you for watching
Wow I wish I saw this before I built mine haha. I didnt have the best tools and supplies but it came together VERY similar to yours. I did the removable dividers too. I made a 3 dog kennel with 5 cubby lockers on top inside of my entryway closet, with a bench. Mine looks very amateur but still very nice for a beginner. Still wish I've seen this video a few months ago lol .
Good job dude, really like the mesh as opposed to the bars (re-bar). Best to you and yours!!
Thank you for watching. I really like it too. It was a client decision, but she nailed it
How does this video have so few views? This is an excellent idea, design, build and video. Very nice bro. Improvement idea (figure out a way to add casters to make it easier to move around the house). Good job!
I appreciate you watching. That is actually a great idea, the thing is definitely not light!
Beautiful build
Thank you!
Thank you for the inspiration!
Thank you for watching!
Great video. This looks great. First time watching your channel.
Thank you very much! I appreciate you watching and following
Love the video. Love all of the details
Thank you!
Beautiful build, brother!
Thank you so much!
This is wonderful! I wish I was in Texas!
Great work ! Thank you for sharing.
Im not sure how this came on my TH-cam with so few views but this is beautiful. Great work both on that and the video editing as well. You got another sub
Thank you so much! I really appreciate you watching and sharing it 😀😇
Love it. Looks awesome and can I just say you have like all the tools I could ever dream of to all my diy's
Thank you for watching. Keep on going 😀
Turned out great, awesome job! 😃👍🏻👊🏻
I think you did a really good job I wished I had that for my ducks
Thank you so much! How many ducks do you have?
@@arayawoodworks six
Very nice work
Thank you for watching!
The expanded metal is a nice touch...nice job overall. I may need to look into getting a domino.
Expensive but so worth it. If I didn’t it again, I would get the smaller domino. I bought the big one because I friend talked me into it but I think the small one is more applicable
Where can you get this metal?
Look for a metal supplier close to you. The one I used closed down since the video 😞
Very impressive! Thanks for the video!
Thanks for watching
Wow nice job
Thank you 😊
Great nice job! 💪😊😉
Thank you!
Hey bud I just saw your video. Great job. Where in Texas are you at? I would love to purchase one for my 3 dogs as well, but with sliding farm doors. I’m in Texas too by the way
Thank you so much for watching. I am in the San Antonio area. Feel free to visit my website and we can talk details about it
Arayawoodworks.com
Amazing
Alex, what type of spray paint did you use for the metal? Did you happen to research if this type of spray paint was safe for you around pets?
Nice design!
Thank you so much for watching 😊
Beautiful build! Tfs :-)
Thank you so much for watching 😊
Looks shape!
Thank you for watching!
Beautiful
Thank you so much for watching!
very nice job. I once made a similar style liquor cabinet and I got cut with the mesh several times 😂
those things are dangerous 😄
Yes they are. That’s the one thing I don’t like about metal, it can cut you so easily! 😂 thanks for watching
Nice job man
Thank you so much for watching 😃
I can't find that wire mesh. Where did you get it? I am going to make one similar to yours for my daughter and her two small dogs. Love the look of the mesh.
I LOVE this. Someone else.asked.the cost of this and you referred to the website but I don't even see this on their. How much would this be with no divider?
Alex, this is a great video and very descriptive thank you for sharing. I have a few questions for you:
1) What was the depth of the rabbits that you used for the recessed panels on the sides of the kennel?
2) What was the depth that you used for the rabbit on the areas where you used the expandable metal mesh?
Thank you! I did 3/8 for the rabbits and 1/4 inch for the doors 😊
Great job what would something like this cost
Very nice
Thank you for watching 😊
Looks great. But how do the removable dividers work? I can't purchase this with out that info. I'm surprised you did not include that in the video.
Hi, thank you so much. You can remove the dividers from the back. I show how they work at 13:50
good shit bro
Haha thanks for watching man!
Beautiful job. I love this, I'm wondering how I can make a cat kennel.
Thank you! That is an interesting question. Idk what would need to be different for a cat. 😊
@@arayawoodworks I think it's perfect as it is :)
Wow man.. great work and certainly a master at your craft.. I gotta ask, how much did you charge to build?
Thank you so much. Definitely not a master but I appreciate the complement. I believe this build was around $1500 delivered to the clients house 😊 Thank you so much for watching the video
Alex, did you attach the wire mesh to the wood before you put in the mitered framing on the inside of the crate? If you did attach it, what did you use to attach the mesh?
I did not attach it. The mitered frame was the solution to keeping the mesh in place. It was a pretty tight fit.
Awesome job! A kennel is my next build. What camera do you use for filming?
Thank you so much for watching! I use an old Canon T5 I got a couple of years ago.
I have a free sketch up file on my website if you need something to reference for your build 😀
Great job. Where did you get the metal mesh?
Thank you so much! I got it from a metal supermarket supplier close to me.
Sia elastic heart the same album I will have on when I make something similar:)
Haha nice! Such a good song 😂
Dog crate complete now.
it takes a different type of skill to record while building must take you twise aslong to complete a project!
👍
Hi im also a fellow san antonioan! Where did you get the metal mesh?
It was local supplier but they closed last year 😬 I’m sorry
How much dollars it take to make it
Did someone open the middle drawer on the far left or did it open by itself at 8:50
Haha wow great eye! That drawer slide is messed up so it doesn’t hold the drawer. Plus I’m pretty sure my cabinet is not perfectly level.... or it could’ve been someone that did it...... (cue scary music)
Where did you get the metal mesh from? And is it heavy?
I got it from a local metal supplier. Yes it is heavy. That is one down sight but it’s strong enough for big dogs
How long did it take you to create this? It’s really beautiful.
Thank you for watching. It took me a couple of weeks working a few nights and weekends.
How much !!
Jaka cena
Hooray. No pocket screws.... tenons... yay real woodworking... spoke too soon... but only a couple of ps.
Haha thank you for watching.
What does this cost to purchase one like it
Thank you for watching. Unfortunately I am not building pieces for clients at this moment.
Where did you get the wire for the side panels and doors?
I got it at a metal supplier in my city 😊
I googled metal suppliers and called until I found it.
How much does this cost to make?
Looks good!! I feel like your trying really hard to hide your accent haha it’s ok buddy
Haha indeed. Thank you for the encouragement and for watching 😀
How do you deliver them?
In my truck. I don’t do anything outside my city
Love this! What is the cost of one?
Thank you for watching. Feel free to visit my website and fill out the project from. I can get you an estimate that way 😊
Arayawoodworks.com
What thickness metal mesh did you use? #18 #9 ?
I believe we ended up using a mesh that was about 1/8 thick or so.
@@arayawoodworks #9 is 0.3” thick and #18 is 0.164” thick, and #13 is 0.225”. Which of these would you use? And thanks for your professional opinion, I appreciate the guidance
😲
What'd you sell it for?
I believe that one was $1400. I can’t remember 😅
Not trying to be rude or I’m just not listening lol but do you by chance no the dimensions
No worries. I have free plans on my website with the dimensions
Do you sell plans ? I'm working on making one for my dogs and don't know all the materials I need. Thanks!
I have some simple free plans on my website that can at least get you started
Do you sell these?
Yes I do, but only locally in San Antonio TX.
I will make it but my dog broke it
What are the dimensions on this?
That one was about 67” long by 24” deep by 33” tall
What's the width of that kennel?
That one was 60inches wide
@@arayawoodworksWhat I should have asked is what's overall measurement?
Gotcha. I have free plans on my website with all the measurements
How much would you charge to make one , if I was to Oder? This would be awesome for my dog grooming room
Thank you for watching. Feel free to visit my website and fill out the project from. I can get you an estimate that way 😊
Arayawoodworks.com
What a Kennel you made but you posted a long video.Try To make a Short video of 5-9 minutes next time
Thank you for watching.
Can you build me one of these? I do not have the tools to do it on my own. Let me know. I can give you my email or phone number in private