Hi friends, these 2 harmless and free Resets, can change the way your Mercedes-Benz drive, the last one can also fix some substantial errors too. Please let me know in the comments how these work for you, cheers Max.
Hard reset (disconnected battery for 10min.) Fixed the battery warning light on my 2002 w203 C180K. Shift reset fixed shifting at 4000rpm from previous owner.
I have a 2004 E500 4matic wagon that just hit 250K miles and I thought the torque converter or the trans was going. Low speed shudder, delayed shift from 3 to 4, hunting for gears coasting downhill, etc. I did the reset and 90% of the issues are GONE! Try it, you'll like it!
I am relieved and so very grateful! My transmission is operating smoothly after resetting the TCM. You've saved me money and mostly, you reduced my anxiety! Thank you, Sir.
So, I tried this on my 96' E320 which was produced on 12/95. I had mildly hard shifts in all gears and my 2nd. to 3rd. upshift would not happen until 3-3.2 rpm. All shifts were clunk, clunk, clunk. Changed the trans shift modulator and that did nothing, though it softened a little.... still needs to be adjusted a bit. Anyway, I have been driving around all afternoon and I think my shifts are significantly smoother and the 2nd/3rd upshift is more in alignment with other shift points. Personally, I think I am still in denial that this has actually worked as I always do skeptical of the TH-cam quick fixes. But, seems to have worked... or maybe I can say it has. Anyway, thanks dude for posting this. I would recommend trying this, can't hurt
i am soo happy i found your channel!!! i have the exact same model and have just started dabbling in doing the reoairs myself, so seeing these videos is certainly raising my confidence to do this stuff. please don't stop with these videos!!!!!
Just followed your very easy to follow instructions for both the TCU and ECU. Finally the transmission shift as it used to. It would dog around corner and the RPM would increase when shifting from 3rd to 4th and now doesn't. The idle was always pretty good but sounds better now at around 500 RPM. Thanks for the tips and I will do them both et each oil change.
Thank you thank you thank you !!!! I have bought a CLK 500 one week ago from an old couple. The geabox was good but the feeling was heavy ... But it was working fine when you push hard on the accelerator. With the 2 first reset everything change.. I have a new gearbox .. Quicker and more responding... Thanks again...!!! One question how long for the self learning to be done ?
You help another person and clk 500 this time with kindly thanks and regards from Poland. Mine v8 after 19 years of driving by lady was so mule, it felt as loading of catapult... but now its different car right after gearbox reset. Throttle reaction was suprising still not same instant as turbocharged a200 amg package from 2019, but still much closer to instant power than I ever thought according to previous overslept expercience. Thanks again, becosue of You feel faster, but whats more important much safer during overtakes and situation demanding quick response. ❤ Still thinking about reset no 2.😅
I tried the throttle response reset a while back. I had bought a used 2005 C320 4MATIC and it was driving smooth but didn't like to get up and go. After the reset the car almost immediately started having issues, no-start, running rough, poor fuel economy. My mechanic had to reset all the adaptations twice to get it working decently again. My mechanic thought it was weird that I should have those problems from the throttle reset procedure, maybe I have a sensor going out on me.
New subbed! We have 2004 E320 225k miles… yearly oil changes and Air filter/cabin. Will be watching all videos and make a list of preventative maintenance to keep our going.
It's not transmission adaptation reset. You can make adaptations only with using Star's or other diag tool. What you done there is removed last throttle adaptations and ecu now is re-learning your gas pedal positions. Good for better launch start, but it will increase fuel consumption a bit.
@@obatech6287 transmission one and throttle bodies for sure. I felt it shift smoother with my driving. But I’d check your conductor plate in your transmission if you’re at my mileage.
@wallidan392 I recently bought this for my W164 ML, they make it for most Mercedes-Benz steering patterns, find yours: www.ebay.com.au/itm/374726369873?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=0eHNO1NSQEW&sssrc=4429486&ssuid=VftSBydbT7C&var=643745443913&widget_ver=artemis&media=COPY
Awesome tutorials! Do the first 2 resets work back to back? Do I need to do a reset at a specific time, let's say before the car starts in the morning? Or, can I do it anytime the car was off? Thanks again.
My daughter doesn't have a car and is trying to fix 2009 c class, but no one can tell us what is the problem. We bypassed the EIS but the battery had to be replaced and then every thing when crazy. We have tried to check with OBD ll but it just reads error. We were told that the computer needed to be reset, do you have any ideas?
Does this fix problem if Vehicle isn’t moving pass 1st gear and only go first gear and reverse ? I’m told transmission needs to be “reset with the right computer” whatever that means…
I followed the instructions you gave. I used the first and the second instructions. After doing the procedures that you said, my window is now not working properly. window motor is working , window moves down and up but not much. When I switch the window for up position, the window will go down and vise versa. Any sagestion on how to fix it? I appreciate any help to you and others also in vlog netwert. Thank you
Hi mate, make sure the battery is charged. The first two resets have no effect on the window function, it is just a coincidence. But try my other reset video for Mercedes windows. th-cam.com/video/cOV_6XoY240/w-d-xo.html
Thanks for the video i will try this Have you heard the common sound a ticking when you turn slightly left or right? Can only hear jnside around the gear shifter area on the coupe version ive heard it do you know what it is?
@@BenzAddiction if you lift the car look underneath the exhaust shields where the handbrake cable is rested check around the propshaft area the one of the original clips from mercedes which hold the handbrake cable breaks and the handbrake cable touches the propshaft as it spins you have to cable tie it away from the propshaft it is common and should be a recall 3 w203s I've had do done it. Please check yours it would be good if that's your issue too and you do a video for it.
@@BenzAddiction I'm not a mechanic but had a few of these cars and used to scour the forums by the way do you have any videos on the esp issue? I've done the left right steering wheel thing still code shows up
Just bought my 2005 CLK320 Convertible 137k from a friend who had it as a 3rd car sitting in garage... nice! made a big difference with this! After buying I was reading horror stories if balancing shaft but this seems to run great and hopefully its not going to fail on me! its my daily driver... only thing not working or at least im not sure how to do it is the start button on the shifter.. it says key not recognized.. maybe battery in key? hmmm will check... also the passenger presenter.. havent looked for fuse yet but will if its a seperate fuse for each side and the previous owner said the main struts may need replaced as havent taken down top yet but I can do that work myself so wasnt too worried..ive seen it down before and its in good condition... however..... after they stopped using it when it was struggling, it was time for them to change battery so maybe it was battery related... I may check soon when I know I have time and a helping hand to rectify it if it doesnt go up or down properly
ok sure will! my other vehicle is an 03 land rover discovery 2 which i work on constantly... so hopefully this is a lot less maintenance lol @@BenzAddiction
Hello, I recently replaced the battery in my 2007 CLK350 convertible and since then, some strange electrical issues have arisen. The headlights only work in "auto" mode and do not function normally. The mood lighting and dashboard also do not illuminate at night unless the headlights are on auto. Additionally, the key fob no longer locks or unlocks the doors, and the trunk will not open unless I use the manual key. The most annoying issue is that the two front windows will not completely close, leaving a small gap between the convertible top and the windows. I should also add that the car believes the top is in Constant operation and it won’t go up or down
@@BenzAddiction All sorts of issues from the media not working to, the car not driving smooth sometimes, like its misfiring or something and other times, its totally perfect.. also the suspension is stiff sometimes, and other times its totally perfect, i noticed if i am going on errands and i have turned ON/OFF the car like 5 times, everything often works perfectly better than when i just left home
I looked but hadnt found a video on what could be my issue if my shifter start button just triggers a code on dash saying key not detected however door locks work, trunk lock works but the door handle doesnt unlock if I grab it and it doesnt lock with the button,, when I gram door handle it says key not detected hmmm new battery also
I had same problem yesterday, I started the car Benz W203 and it shows alternator failure warning and brake lining warning but after drying the car won't crank. The lights show up and the FAN moves with a very high speed and sound but won't start. Please what do I do? Or is the battery down?
@@BenzAddictionI have a similar issue with my clk320. I took it to the car wash and it stopped. As well as the Oil temp gauge stopped showing. Then, it became a no crank. And when I turn the key.. the fan spins loudly. There seems to be no connection with the starter fuse (I tried replacing the fuse) as well… wires or fuse box..? What are your thoughts? Thank you.
@@BenzAddiction how ? Can u help me a diagram or else to do it . What connector on ecu? Please, leave me you email . I send u information and pics . Help me , I pay u ! Because I am on Cyprus 🇨🇾. Here no good electrician .
I knew about the 1st reset ive done it before it would help out to relearn your driving but thats about it. However the second reset completely changed the way my S500 drives and accelerates i use to think it was slow maybe because its a heavy car but now it takes off like my E500 perhaps ill do the reset on my E500 to see if it makes a difference like my S class
I usually disconnect my negative battery terminal just because I don’t want my battery drained.would that cause and issue based on what U said last on ur video ??
It is not risk-free. Best practice would be to connect a good trickle charger and set it on maintenance mode. Good for battery life and peace of mind and ...
@crypto_11 Every time you connect the battery and disconnect it, that produces a surge in the 50 control units which increases the risk of sensitive control modules to fry...
I have a mercedes c200 cdi (w204). The fuel indicators turns on from time to time even though I have plenty of fuel left. Multiple indicators flash on and off and sometimes also the windows won’t work. Is there a problem with my ECU? Should I try a hard reset by disconnecting the negative from the battery?
Too much valuable info. Normally CLK versions use as a fun car & drive occasionally. Like whenever I try to start it after 30 days it's all the time need to charge battery by disconnecting one terninal. So what's the minimum time you recomend, wemust driver CLK & is it normal behaviour of battery issue after 30 daya gap OR battery need to change.
Thanks mate, weak Battery can cause numerous malfunctions on Mercedes-Benz. I suggest connecting a trickle charger every week at least if not using the car instead disconnecting the battery, they are cheap these days even a 2 Amp trickle charger can do the job.
These cars sometimes goes into limb mode without any alarms.Then they tell you you need a twenty thousand dollar fancy launch machine to find the fold.Or if they cannot find the problem they tell you you must start replacing sensors.The problem is to get to some of these sensors take a day to change.And for there cost you can buy a new car.I own a 2005 e55 AMG great car but crap electronics.Cant believe that there is no dipsticks on the engine or transmission.Try find an electronic fault on these cars with no fault code.Try find a wire problem on these cars is a nightmare it is better to replace the whole harness.
hear that horrible noise at start up? that will cost about $5000 if you don't fix it. that is a stretched chain or you have put to thick oil in it and one of the cam adjusters is disengaging at start up, which creates slack between the gears and a hammering action, as the lobes on the exhaust cam go passed max lift the valve springs finish the cams rotation as there is slack in the chain from the intake releasing the tensioner early, the self locking tensioner only makes it worse as it takes the slack and doesn't give it back. I don't like this design I would swap my 05 c180 for a 2000 with a m111 tomorrow
Removing adaptation from tcu is not a refresh. It like when you learn how to walk and suddenly you forget how to walk, you will add more wear to your worn transmission.
Hi friends, these 2 harmless and free Resets, can change the way your Mercedes-Benz drive, the last one can also fix some substantial errors too. Please let me know in the comments how these work for you, cheers Max.
Is this the same for a 2014 MB E350? What would be different?
I performed this on my 2007 R230 and boy what a difference it made. Instant Horsepower.
Great to hear 👍
I did the reset on W163 ML430 and yes it changed idle speed to 700 rpm from 600 rpm. Much happier - Thank-you111❤
Glad it worked on W163 M113 4.3 too.
Hard reset (disconnected battery for 10min.) Fixed the battery warning light on my 2002 w203 C180K. Shift reset fixed shifting at 4000rpm from previous owner.
Thanks mate 👍
I have a 2004 E500 4matic wagon that just hit 250K miles and I thought the torque converter or the trans was going. Low speed shudder, delayed shift from 3 to 4, hunting for gears coasting downhill, etc. I did the reset and 90% of the issues are GONE! Try it, you'll like it!
👍
Also, clear all of your codes through all modules and drive about 50 miles. The car will basically try to reset to factory and will feel fresh again.
I am relieved and so very grateful! My transmission is operating smoothly after resetting the TCM. You've saved me money and mostly, you reduced my anxiety!
Thank you, Sir.
You are welcome 😊
So, I tried this on my 96' E320 which was produced on 12/95. I had mildly hard shifts in all gears and my 2nd. to 3rd. upshift would not happen until 3-3.2 rpm. All shifts were clunk, clunk, clunk. Changed the trans shift modulator and that did nothing, though it softened a little.... still needs to be adjusted a bit. Anyway, I have been driving around all afternoon and I think my shifts are significantly smoother and the 2nd/3rd upshift is more in alignment with other shift points. Personally, I think I am still in denial that this has actually worked as I always do skeptical of the TH-cam quick fixes. But, seems to have worked... or maybe I can say it has. Anyway, thanks dude for posting this. I would recommend trying this, can't hurt
@@mattmatt591 Great attitude, thanks for the feedback 👍
i am soo happy i found your channel!!! i have the exact same model and have just started dabbling in doing the reoairs myself, so seeing these videos is certainly raising my confidence to do this stuff. please don't stop with these videos!!!!!
Thanks mate, another video is coming in 1 hour , cheers.
Just followed your very easy to follow instructions for both the TCU and ECU. Finally the transmission shift as it used to. It would dog around corner and the RPM would increase when shifting from 3rd to 4th and now doesn't. The idle was always pretty good but sounds better now at around 500 RPM. Thanks for the tips and I will do them both et each oil change.
@plhuckels1957 Glad it helped;)
This video was a blessing in disguise thank you so much for your help
@@antoninocimomorte7498 you are welcome 😊
Thank you thank you thank you !!!! I have bought a CLK 500 one week ago from an old couple. The geabox was good but the feeling was heavy ... But it was working fine when you push hard on the accelerator. With the 2 first reset everything change.. I have a new gearbox .. Quicker and more responding... Thanks again...!!! One question how long for the self learning to be done ?
Great to hear, few hours of normal driving
@@BenzAddiction ok !! thanks again
You help another person and clk 500 this time with kindly thanks and regards from Poland.
Mine v8 after 19 years of driving by lady was so mule, it felt as loading of catapult... but now its different car right after gearbox reset. Throttle reaction was suprising still not same instant as turbocharged a200 amg package from 2019, but still much closer to instant power than I ever thought according to previous overslept expercience.
Thanks again, becosue of You feel faster, but whats more important much safer during overtakes and situation demanding quick response. ❤
Still thinking about reset no 2.😅
I need to try this on my CLk 320 w209 hopefully it makes the rpm better
I tried the throttle response reset a while back. I had bought a used 2005 C320 4MATIC and it was driving smooth but didn't like to get up and go. After the reset the car almost immediately started having issues, no-start, running rough, poor fuel economy. My mechanic had to reset all the adaptations twice to get it working decently again. My mechanic thought it was weird that I should have those problems from the throttle reset procedure, maybe I have a sensor going out on me.
Should be s.th else simultaneously happened to the engine :)
Very helpful and very practical techniques mate, thanking you.
Thanks mate 👍 😀
New subbed! We have 2004 E320 225k miles… yearly oil changes and Air filter/cabin. Will be watching all videos and make a list of preventative maintenance to keep our going.
Great to have you hear mate, E320 is the sweet spot of practicality and joy...
Do you know if any of these resets will help if you have an audio problem, meaning no audio is coming from the speakers , but the head unit turns on ?
This can be a fuse, check my other video on fuses.
It's not transmission adaptation reset. You can make adaptations only with using Star's or other diag tool. What you done there is removed last throttle adaptations and ecu now is re-learning your gas pedal positions. Good for better launch start, but it will increase fuel consumption a bit.
👍
Will the fuel economy go up after it gets used to driving the way you normally drive?
Just got an 03 e500 with only 136k on the clock in a trade. I’m definitely going to be doing these this weekend! Thank you
Great choice 👍
That's my car ....tell me about your experiences
@@obatech6287 transmission one and throttle bodies for sure. I felt it shift smoother with my driving. But I’d check your conductor plate in your transmission if you’re at my mileage.
@@obatech6287I’m so sorry for the delay but 100% worth it to do the transmission reset
Can i reset throttle response on a w204 c200 kompressor. Have throttle lag . The car has manual transmission.....Thanks for informative video
Yes, try it, it is harmless.
Nice stitching on the steering! How did you do it? Thanks
Search CLK steering leather on eBay... $15, stitch it on the steering wheel in 10 min...
Thank you!
Do I need to buy a stitch kit for it?
@wallidan392 I recently bought this for my W164 ML, they make it for most Mercedes-Benz steering patterns, find yours:
www.ebay.com.au/itm/374726369873?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=0eHNO1NSQEW&sssrc=4429486&ssuid=VftSBydbT7C&var=643745443913&widget_ver=artemis&media=COPY
Awesome tutorials! Do the first 2 resets work back to back? Do I need to do a reset at a specific time, let's say before the car starts in the morning? Or, can I do it anytime the car was off? Thanks again.
Yes they do.
Does it work on CLS500 c219 (2006)
It does.
My daughter doesn't have a car and is trying to fix 2009 c class, but no one can tell us what is the problem. We bypassed the EIS but the battery had to be replaced and then every thing when crazy. We have tried to check with OBD ll but it just reads error. We were told that the computer needed to be reset, do you have any ideas?
I wish I could help, these faults need careful diagnosis using good scanners. Can't throw a rough guess.
Great stuff, just bought a c209 off an old man and it has been wonky both in terms of shifting and idling. Gonna try this tomorrow
@@solinvictus--x let us know the results :)
How did it work?
Does this fix problem if Vehicle isn’t moving pass 1st gear and only go first gear and reverse ? I’m told transmission needs to be “reset with the right computer” whatever that means…
@@DOPEGAMETV Try and see won't harm anything.
had the same issue, your car went into " Safe mode " you need an reset on your errors inside the ecu, its a sensor issue, not a mechanical problem
I followed the instructions you gave. I used the first and the second instructions. After doing the procedures that you said, my window is now not working properly. window motor is working , window moves down and up but not much. When I switch the window for up position, the window will go down and vise versa. Any sagestion on how to fix it? I appreciate any help to you and others also in vlog netwert. Thank you
Hi mate, make sure the battery is charged. The first two resets have no effect on the window function, it is just a coincidence. But try my other reset video for Mercedes windows. th-cam.com/video/cOV_6XoY240/w-d-xo.html
Nice I’m going to try these reset ! Thanks
@@sefarian9355 let us know if you notice a change after.
@ sitting in my w211 E63 right now
@@BenzAddictionit work ! Idle went down thanks again
Thanks mate, great vids.
👍
Thanks for the video i will try this Have you heard the common sound a ticking when you turn slightly left or right? Can only hear jnside around the gear shifter area on the coupe version ive heard it do you know what it is?
Yes, I think I have this too, not sure what it is.
@@BenzAddiction if you lift the car look underneath the exhaust shields where the handbrake cable is rested check around the propshaft area the one of the original clips from mercedes which hold the handbrake cable breaks and the handbrake cable touches the propshaft as it spins you have to cable tie it away from the propshaft it is common and should be a recall 3 w203s I've had do done it. Please check yours it would be good if that's your issue too and you do a video for it.
@@BenzAddiction I'm not a mechanic but had a few of these cars and used to scour the forums by the way do you have any videos on the esp issue? I've done the left right steering wheel thing still code shows up
Another superb video, will try them
Thanks Allan, let us know the results if you can please.
Does this help reset issue with car nto starting at all like no sound of engine turning on???
This does not fix electrical or mechanical issues, it is only a TCU reset.
Just bought my 2005 CLK320 Convertible 137k from a friend who had it as a 3rd car sitting in garage... nice! made a big difference with this! After buying I was reading horror stories if balancing shaft but this seems to run great and hopefully its not going to fail on me! its my daily driver... only thing not working or at least im not sure how to do it is the start button on the shifter.. it says key not recognized.. maybe battery in key? hmmm will check... also the passenger presenter.. havent looked for fuse yet but will if its a seperate fuse for each side and the previous owner said the main struts may need replaced as havent taken down top yet but I can do that work myself so wasnt too worried..ive seen it down before and its in good condition... however..... after they stopped using it when it was struggling, it was time for them to change battery so maybe it was battery related... I may check soon when I know I have time and a helping hand to rectify it if it doesnt go up or down properly
Excellent, for all the issues you mentioned, I have a separate video, so make sure to check them, check my W209 playlist out and good luck.
ok sure will! my other vehicle is an 03 land rover discovery 2 which i work on constantly... so hopefully this is a lot less maintenance lol @@BenzAddiction
which foxwell engine diagnostic tool do you have?
@dparham Engine and transmission wise I think CLK is going to be 3 times more reliable;)
I did the second reset and open the door before the 3 minutes to hear the sound I havnt heard a click yet did I mess up?
@rickygalvez1230 You can repeat the reset, it is harmless:)
When doing this, do I have to put the gearbox into neutral? And do I have to take The handbrake off.
No in P.
When I tried to do the throttle body reset I couldn't hear any noises coming from the throttle body under the hood does that mean it didn't work
That's weird.
I have tried the auto reset before it makes a difference
Thanks mate for confirmation 👍
Hello, I recently replaced the battery in my 2007 CLK350 convertible and since then, some strange electrical issues have arisen. The headlights only work in "auto" mode and do not function normally. The mood lighting and dashboard also do not illuminate at night unless the headlights are on auto. Additionally, the key fob no longer locks or unlocks the doors, and the trunk will not open unless I use the manual key. The most annoying issue is that the two front windows will not completely close, leaving a small gap between the convertible top and the windows. I should also add that the car believes the top is in Constant operation and it won’t go up or down
You need to run a re-learn/resets on modules, pretty simple with windows, I have few videos on this.
@@BenzAddiction Oh thank you. Should I start with #3 from this video of disconnecting the negative battery cable?
@@Phil0609 hold the window switches for more than 5 seconds each direction when stopped first...
Look into getting a ICarsoft or Launch Creader Elite scan tool both under $200 and worth it. I have the ICarsoft It’s helped.
Great video brother.
@yungjetsquee706 Thanks mate 👍
You talked about the battery reset, does this work for a benz who have two batteries ???? which one should i disconnect then ?? i have 2007 S-Class
What sort of issues you have?
@@BenzAddiction All sorts of issues from the media not working to, the car not driving smooth sometimes, like its misfiring or something and other times, its totally perfect.. also the suspension is stiff sometimes, and other times its totally perfect, i noticed if i am going on errands and i have turned ON/OFF the car like 5 times, everything often works perfectly better than when i just left home
Do i need to close the door after release paddle?
Please watch the video one more time.
😃 it worked on my old tracktor and bicycle also 😃😃.
Thank you so much !!!
👍
I looked but hadnt found a video on what could be my issue if my shifter start button just triggers a code on dash saying key not detected however door locks work, trunk lock works but the door handle doesnt unlock if I grab it and it doesnt lock with the button,, when I gram door handle it says key not detected hmmm new battery also
This might be helpful: th-cam.com/video/XBxgdIeqWG4/w-d-xo.html
Would this work on a mercedes w163 ml 320 .
@Leo70780 YES. should work on any M112 and 5 speed. 722.6.
I have SLK 2005, 190.000km. When to chsnge oil in gearbox ?
@@vladimirart758 60k km is recommended. Oil + filter + gasket.
I had same problem yesterday, I started the car Benz W203 and it shows alternator failure warning and brake lining warning but after drying the car won't crank. The lights show up and the FAN moves with a very high speed and sound but won't start. Please what do I do? Or is the battery down?
Try disconnecting battery over night.
@@BenzAddictionI have a similar issue with my clk320. I took it to the car wash and it stopped.
As well as the Oil temp gauge stopped showing.
Then, it became a no crank. And when I turn the key.. the fan spins loudly. There seems to be no connection with the starter fuse (I tried replacing the fuse) as well… wires or fuse box..? What are your thoughts? Thank you.
Help me !! I
Have w203 , maf sensor wiring not good , 5v empty ! How to find this wiring?
This should be easy to rebuild from what you have.
@@BenzAddiction how ? Can u help me a diagram or else to do it . What connector on ecu? Please, leave me you email . I send u information and pics . Help me , I pay u ! Because I am on Cyprus 🇨🇾. Here no good electrician .
Thank u from USA.
👍 from Australia 🇦🇺
Will this work in my 09 c350? I was going to upgrade my ecu to renntech but was told I could refresh the cpu
Try it, no risk involved...
Anybody help I currently own a 2004 Mercedes clk kompressor my headlamp washers on the last lights won't function any ideas
If it comes out but does not spray water, the nuzzle are blocked.
@@BenzAddiction I'm getting nothing at all when I press the button on the light switch wonder if it's the pump at fault
Does these resets work on a 1996 E320 Benz. Six cylinder engine
There is one way to find out as they are harmless...
Hello ~ I have a 2012 MB CLS550 with error code P062C00, How can I reset the PCM?
Check for moisture in front SAM area, there is a topic on Mercedes-Benz forum on this.
This worked
on my wife also !
Glad it helped
:D :D
Does this work on all other vehicle makes
Most 2001-2012 Mercedes Benz. Not sure about other brands.
does anybody know what the code “-673” that shows up mean in a slk230?
P0673 is more about glow plug issue, which makes no sense for a M111. Sometimes we need to use better scanners...
Will it work if you have a p0705 code and check engine light on?
It should...
I knew about the 1st reset ive done it before it would help out to relearn your driving but thats about it. However the second reset completely changed the way my S500 drives and accelerates i use to think it was slow maybe because its a heavy car but now it takes off like my E500 perhaps ill do the reset on my E500 to see if it makes a difference like my S class
👍
What if your ignition switch not turning
Flat battery?
I usually disconnect my negative battery terminal just because I don’t want my battery drained.would that cause and issue based on what U said last on ur video ??
It is not risk-free. Best practice would be to connect a good trickle charger and set it on maintenance mode. Good for battery life and peace of mind and ...
@@BenzAddiction what u mean is not risk free
@crypto_11 Every time you connect the battery and disconnect it, that produces a surge in the 50 control units which increases the risk of sensitive control modules to fry...
I have a mercedes c200 cdi (w204). The fuel indicators turns on from time to time even though I have plenty of fuel left. Multiple indicators flash on and off and sometimes also the windows won’t work. Is there a problem with my ECU? Should I try a hard reset by disconnecting the negative from the battery?
Check the negative terminals...
Does to this work for Mercedes clk 200 kompressor ?
100 percent.
@@BenzAddictionthanks legend
How do you reset the converter
Too much valuable info. Normally CLK versions use as a fun car & drive occasionally. Like whenever I try to start it after 30 days it's all the time need to charge battery by disconnecting one terninal. So what's the minimum time you recomend, wemust driver CLK & is it normal behaviour of battery issue after 30 daya gap OR battery need to change.
Thanks mate, weak Battery can cause numerous malfunctions on Mercedes-Benz. I suggest connecting a trickle charger every week at least if not using the car instead disconnecting the battery, they are cheap these days even a 2 Amp trickle charger can do the job.
Hi, steering cover looks really nice. Did you stitch on yourself?
Thanks, Yes, it is too easy, buy one from ebay.
@@BenzAddiction Thanks! Just ordered one and already dreading the sewing! 😊 Will let you know how I get on. Yours look professionally done
@@fattou3221 Just need patience, enjoy.
I'm going to try it. Thanks 🙏🙏
👍
Can I do this with a 2004 CLK 500 ?
@@Scarfaxe007 Certainly :)
Will this work on my 04 e320
Yes.
looking foe this for a some time thanks
Good luck :)
Will this work on my 05 clk-320?
Yes
How leaving your car without a battery overnight will damage it ?
It is the surge of power that can damage control units when you connect or disconnect the battery. Low probability but possible.
@@BenzAddiction That is what I thought but there should be some level of protection against that happening.
as long as you disconnect your black terminal first and put it back on last you don't have to worry about surges .
Thank You for shering. A+
👍
My 2004 C240 ignition key wont turn turn on ,help
Flat battery?
will this work for a 2010 Mercedes c300
Give it a go, there is no harm in trying.
Ml350 2009 will it work?
Should work, give it a go!!!
Did it work for your ml350?
I have a 07 e350 mercedes benz and I need turbine speed sensor conductor plate body valve replacement.
Anybody who can help me??
Lots of videos out there just search: " 722.9 conductor plate replacement "
Does this work for a 2004 E320?
It does.
It's valid for a w211 ?
@nelsonafonso1 yes.
03 clk320 a 209 will it work
Sure it will.
Hi friends, I have Mercedes Benz 203 engine 2007,it start for a week now I visit different garage but still hunting and the rpm is going too high
Clean MAF sensor first and reset the engine and battery, see my other video on how to reset (3 best resets).
I’m In the car right now and I don’t think it worked I have the m112 but I didn’t hear any clicks ig I’ll find out in a couple minutes
Ok
thank you
👍
Excelent!
👍
W212... Where is ecu fuse? I understand is possible to reset when take and put back this fuse
th-cam.com/video/U1tyHTd6uN4/w-d-xo.html
Nice, thx
👍
I have a M119 engine and a 722.6 transmission what about us M119 guys???
A 1997 m119 SL
Have you tried the transmission reset? It should work and please share the results.
These cars sometimes goes into limb mode without any alarms.Then they tell you you need a twenty thousand dollar fancy launch machine to find the fold.Or if they cannot find the problem they tell you you must start replacing sensors.The problem is to get to some of these sensors take a day to change.And for there cost you can buy a new car.I own a 2005 e55 AMG great car but crap electronics.Cant believe that there is no dipsticks on the engine or transmission.Try find an electronic fault on these cars with no fault code.Try find a wire problem on these cars is a nightmare it is better to replace the whole harness.
I understand that the electronics is complicated, it is not as simple as a camry and that what makes it different but lovely.
Proper
👍
❤
👍
🙏
👍
hear that horrible noise at start up? that will cost about $5000 if you don't fix it. that is a stretched chain or you have put to thick oil in it and one of the cam adjusters is disengaging at start up, which creates slack between the gears and a hammering action, as the lobes on the exhaust cam go passed max lift the valve springs finish the cams rotation as there is slack in the chain from the intake releasing the tensioner early, the self locking tensioner only makes it worse as it takes the slack and doesn't give it back. I don't like this design I would swap my 05 c180 for a 2000 with a m111 tomorrow
Thanks for your comment. M112 and M113 have no issue with timing chain at all. Early M272 and M273 yes.
the 7 speed is 722.9 not 722.8
Yes correct 👌
To affraid. Trying to explain to my mechanic “I saw it on TH-cam”
What is too scary about these resets?
F minor because the 3rd minorAb😅😅😅
Accepted.
Removing adaptation from tcu is not a refresh. It like when you learn how to walk and suddenly you forget how to walk, you will add more wear to your worn transmission.
👍
Thank you
You are welcome
Thank you
👍