How to Seal a Motorcycle Fuel Tank with KBS Coatings Tank Sealer Kit by JP Cycles

The KBS Cycle Tank Sealer Kit contains everything you need to seal a tank of up to 5 gallons. This kit contains our KBS AquaKlean (a water-based, heavy-duty, cleaner/degreaser) and KBS RustBlast (a powerful rust remover/metal etch) to obtain a permanently sealed, rust-free fuel tank. These KBS prep products are formulated with a unique Oxygen-Block Technology which reduces the occurrence of flash rust by over 80% and extends rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film.

[@MrGliderider55]

I have been wrenchin bikes for almost 50 years and this is the best tank sealer I have found by far... But.. you must follow the directions to the T. When you use the rust blaster you failed to mention that that stuff is a very powerful etching component and it will dull the paint if it gets on it, and you must put some thick plastic under the fuel cap and put it on very tight, you must turn the tank in a matter that covers the entire tank, the way you did it. nothing was treated on the top of the tank. when you put the sealer in, what ever you get it on, if it dry's you cant get it off, and just sit down and roll the tank consistently for at least 1/2 hour and focus on all sides including the top of the tank, sorry so long but I hope this helps

[@jackisonline2]

It did a lot, cheers :)

[@fayc3fk3r]

Really need to keep tapping on the tank with your wedding band huh...

[@jasonhurley8164]

i used molasse and it worked so well 1 part molasse to 9 parts water it got rid of all the rust in a week and its safe to use

[@rgmcmichael]

Appreciate the effort. This vid could be shorter and more to the point. I doubt Hollywood will be calling so hope your a better mechanic.

[@supermotarded3]

I used duct tape for step 1 like the directions said and it didn't hold up at all as soon as i poured in the kleaner it was coming out the bottom

[@coachjosephseahorn2853]

I tried this method and my gas tank still leaks. The gas leaks out of one of the breather holes once it gets to a certain level.

[@TreadTalk247]

Is the TL1000R your own bike? I am a TL owner as well and was curious if you are part of our tlplanet tlzone and TL owners Facebook groups? If you aren’t I invite you to join us!

[@Ausblack]

plunger? it's a syringe.

[@Ausblack]

@@architude But stobie poles are actually different.

[@Ladosligese]

so buy this stuff to clean out the tank.. or use white vinegar ? .. know where i`m going :-p .. to seal it .. still looking into cheapo way for that one :D .. oh and btw.. please hit the tank with your damn wedding ring again ..

[@davehernandez190]

lets say uhhhhh, a few more times

[@buffi944]

To much presentation crap