Been doing this for years.I only use cleaning vinegar and Damon Red Coat. Never had a comeback for over36 years. The majority of my jobs were rust problems.I always solider pin holes with a huge solider iron.
Great video! Fun fact if you live in San Antonio…. I couldn’t find redkote at any autozone and figured I would have to order it. O-Reillys carry’s that shit in stock!! I need to redo my tank because I didn’t pay as much attention to cleaning the inside when doing it. I had red fuel for like 4 days😂. Anyway, I’ll knock it out soon and get the ride back on the road. Thanks TJ!
Great video! I recently discovered your channel. Honestly I had no idea that people were chopping Honda 600s. Using your products I can see how this could be a really fun project! I have a Buell Blast Bobber project that I have had for a couple of years. There is no knowledge base for them. I’ve considered giving up several times but I think if I could finish it that, a VLX chopper would be next.
When cleaning and Coating new Aftermarket Harley 5 gallon split tanks. I would clean each half with acetone, drain then coat as you shown in video then proceed to the other half of the tanks? How much acetone and Red Coat should i use in each half? Thank You.
This is a very basic question so I apologize for the ignorance, when I do this, what is stopping my fuel valve from clogging with red koat? Do I just stick something through the fitting afterwards?
I ask because I bought a 1gal steel gas can and it’s leaking at the seams, but hoped to keep the outside in its original condition, so have been looking into interior seal options
@@TJBRUTALCUSTOMS True indeed. And thanks, Actually going with a '05 vtx 1300, same price running and with half the miles. I'm going to do my best to chop it and get rid of the plastic on it. The tank seems a bit odd, 1st thing I want is a peanut, not too common with the vtx.. Great content.. 👍
I don’t even want to think about baking it man. My dad painted it for me and baked it in an industrial oven and it charred the entire red kote right off in ashes😢 I’m finally done cleaning it after 2 weeks of tossing and shaking the fuck outta the tank 😅
Been doing this for years.I only use cleaning vinegar and Damon Red Coat. Never had a comeback for over36 years. The majority of my jobs were rust problems.I always solider pin holes with a huge solider iron.
Great video!
Fun fact if you live in San Antonio…. I couldn’t find redkote at any autozone and figured I would have to order it. O-Reillys carry’s that shit in stock!! I need to redo my tank because I didn’t pay as much attention to cleaning the inside when doing it. I had red fuel for like 4 days😂. Anyway, I’ll knock it out soon and get the ride back on the road. Thanks TJ!
you can order it directly from Damon industries online. ive never seen it in a retail store honestly.
Thanks for the comment Dude! DO FUN SHIT!!
I get mine from automotive paint stores.Just say no to Creme.
Bro is killing it out here. Thanks for the helpful vid
ABSOLUTE CARNAGE!!!! Thanks for the comment Michael!
Thanks for the video
Our pleasure!
Great video! I recently discovered your channel. Honestly I had no idea that people were chopping Honda 600s. Using your products I can see how this could be a really fun project! I have a Buell Blast Bobber project that I have had for a couple of years. There is no knowledge base for them. I’ve considered giving up several times but I think if I could finish it that, a VLX chopper would be next.
When cleaning and Coating new Aftermarket Harley 5 gallon split tanks. I would clean each half with acetone, drain then coat as you shown in video then proceed to the other half of the tanks? How much acetone and Red Coat should i use in each half?
Thank You.
Excellent stuff brotha!!
Thanks dudes!! Always good to hear from ya'll!
Tj…. What do you think about POR-15?
Never mind! I saw you referred to it in your video without saying the name lol
You never disappoint with the commentary 😂 good shit as always! 🫡🤙🏽
HAHA! Thanks man! and thank you for the comment!
This is a very basic question so I apologize for the ignorance, when I do this, what is stopping my fuel valve from clogging with red koat? Do I just stick something through the fitting afterwards?
👍
Great vid and perfect timing. Have an 89 Electra Glide tank that I need to seal and was looking for a how not to totally fuck it up tutorial.
we are huge proponent of "how not to fuck up your shit!" Thanks for the comment man!
Is this good for seam leaks?
I ask because I bought a 1gal steel gas can and it’s leaking at the seams, but hoped to keep the outside in its original condition, so have been looking into interior seal options
@@zacharynix6421 It may work!
Thanks for the video!! You’re funny, but I like you, but you’re funny 🤣
And I love you shop table!!
Glad you enjoy it!
Fantastic!! 🎉
Thank you!!!
Good stuff, what do you think about a '96 shadow vtx1100. Can I chop it like that 600?? One around me pretty cheap. Thanks and keep Rocking*
You can do anything you want if you got the skillzzz
@@TJBRUTALCUSTOMS True indeed. And thanks,
Actually going with a '05 vtx 1300, same price running and with half the miles.
I'm going to do my best to chop it and get rid of the plastic on it.
The tank seems a bit odd, 1st thing I want is a peanut, not too common with the vtx..
Great content.. 👍
@@lawv.8424 CHEERS
We so need these golden quotes on shirts.
😂
We need videos on Fiz!
🐶
jejejjejej D.A.F! Nice man, good shits all the time!
Thank you so much!
Use this same method to dish my tanks 🔨 🙃😆
It's the choice of 4 out of 10 professional fabricators across 14 countries. 🍻🍻
After the red coat dries good you can put the tank in the sun on hot shiny days and or bake it in the oven at 160-170f for a couple hours
mmmmmm cookies
I don’t even want to think about baking it man. My dad painted it for me and baked it in an industrial oven and it charred the entire red kote right off in ashes😢 I’m finally done cleaning it after 2 weeks of tossing and shaking the fuck outta the tank 😅
@@oscarrobles5771 👍
Can you do a video installing your tank? I wanna buy your tank but i dont wanna fuck up
which tank? we have several!
@@TJBRUTALCUSTOMS The peanut gas tank for the Honda Shadow 600 vlx would be awesome.
@@TJBRUTALCUSTOMS do a install vid on a 750 phantom
Yooo ! CN I buy that tank ??? 😂😂😂 seriously tho..
Well...it's a pretty rare custom tank 🤣
🙏High-five brother
HELL YEAH BROTHERRRRRR!!!!
I stopped watching this because my mom is not stupid
🤣🤣 well maybe you should have her watch it with you!! Fun for everyone!!