Just like so many other disappointing videos, there is audio but nobody is speaking to explain what is going on. No description of the chemicals and proportions, or recommendations of the proper application methods. It was interesting but mostly useless. Also, is the amount of time required worth the result? New rims are not that expensive.
I just had a few sets of 15" rims sandblasted. They were very rough. $20 each. A few rattle cans of turbo Rustolieum and they look good. Will the paint hold up? I have NO idea.
(So called “chrome finish” paint is mainly intended for indoor diy use like mirror frames, picture frames etc, - It’s not as durable as silver car paint / enamel paint plus clear coat etc.)
But what price do you put on R&D? What is the value as a proof of concept? What price do you put on learning, developing, practicing, and mastering a skill?
I have resprayed my wheels but I done them while they were still on the van,I used two coats of primer and rub down and cleaned off before two coats of hih gloss sil very and two coats of lacquer,
There's no way with big flakey rust that it started with, that it came out that smooth before the putty! I've cleaned wheels with way less rust that had DEEP pits 🙄
Heard of brush plating. This would had been great in the '60's & 70's as our poor man's mag was a chrome plated factory rim. Will this hold to the elements?
What a load of negativity, bear in mind that not everyone is an automotive genius like most everyone on here, someone, somewhere will have learned a bit here.
No, it wouldn't. Painted wheels last 10 - 15 years, depending on conditions of driving. If you have too much money, better gold-plate them, while you are at it
Das 4 mal mit der Arbeitszeit die da drin steck bekommt man auch schon neue Felgen. Ob das spachteln so gut ist? Wird das ganze dann nicht noch mehr Unwuchter. Wie lange die Spachtel Masse hält ist dann auch fraglich bei den ständigen Belastungen.
But that is what he loves doing, so it is not a waste of anything to him. All that matters is how HE feels after he did it. What any of us think on the negative side does not matter.
Why not just place the wheel in a vat of Evap-o-rust? I've removed rust from many items using it; the stuff works like magic in releasing the rust from the metal without affecting the core material. And it can be filtered/separated for reuse over and over. It has zero toxicity and is pH neutral.
@@LowMileageChannel I've heard that the way you've done it is particularly difficult, based on the measurements of the fluids involved and the time they have to work - and the time to rinse th solution. Beautiful work, btw!
Yeah absolute waste of bloody good time & resources which could be spent far better on something else!! Mind you this method migh be good if you were repairing something like Ben Hur's wooden chariot wheels!! I have to conclude therefore that this guy simply has far too much free time & so obviously with nothing better to do!!
@@LowMileageChannel it was super interesting and, as i sayed, amazing job. Im just honestly curious to which point is it worth to restore such a cheap equipment to that state...Im not demoralizing what u did.
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
Just like so many other disappointing videos, there is audio but nobody is speaking to explain what is going on. No description of the chemicals and proportions, or recommendations of the proper application methods. It was interesting but mostly useless. Also, is the amount of time required worth the result? New rims are not that expensive.
You are a tit if you don’t know why this is 😂
Yes like a bikini. What it reveals is very interesting but what it conceals is vital.
I’m glad. Too much mouth running on TH-cam. Just enjoy the art and let that be that.
Shut up you moronic numskull
It's not a tutorial video, much better original soundtrack than some club music.
I would've thought chrome plating bath would've been the steps involved in this process. Never heard of hydrochroming before. Looks neat.
this process can chrome wood materials as well.
I wanna try it out with customizing hot wheels cars now
Search for mirror silvering, that is all this is.
@@abpsd73 yes similar
To much work
Amazing. Appreciate the amount of effort you had gone through to demonstrate this option. Its not easy. Simply put.
Thanks for the man or woman who invented sand blasting, you would not never clean that rust any other way. Great result and very good video!
its possible to clean in other ways, but sandblaster is more faster.
I just had a few sets of 15" rims sandblasted. They were very rough. $20 each. A few rattle cans of turbo Rustolieum and they look good. Will the paint hold up? I have NO idea.
(So called “chrome finish” paint is mainly intended for indoor diy use like mirror frames, picture frames etc, - It’s not as durable as silver car paint / enamel paint plus clear coat etc.)
Durability? It looks great, but will it hold up?
Long enough to hang on the wall in the garage.
Give it a month the rust will slowly reappear ,, he never gt rid of all the Rust completely it will come back soon enough
Freaking AMAZING job!!!! Looks great!!!!
You can buy a new steel rim for 45$..he has days wrapped up in a rim where that chrome will be flaking in 6 months
You must be fun at parties
😂😂😂@@vordan7111
Just admit that you're a typical lazy one.
But what price do you put on R&D?
What is the value as a proof of concept?
What price do you put on learning, developing, practicing, and mastering a skill?
😂🤣Exactly! Make it worth while. Like watching him restore a paper plate.
The starting wheel was perfectly fine 😂.
I have resprayed my wheels but I done them while they were still on the van,I used two coats of primer and rub down and cleaned off before two coats of hih gloss sil very and two coats of lacquer,
Phenomenal! I could not follow you and don't understand anything you did.
Looks good.
Amazing result, the wheel looked beautiful❤.
Amazing work
high risk of breaking your hand and arm 5:30 !!!!!
What do you mean lol
@@MauriceNL1i think he meant. 5:03
@@pz8843 True
Calm down karen. He's a professional. Don't try this at home.
Youre a wizard harry
There's no way with big flakey rust that it started with, that it came out that smooth before the putty! I've cleaned wheels with way less rust that had DEEP pits 🙄
Good job looks really nice
It's amazing.
Wow that's cool
Very nice, even with the background sound effects
Could do without the fake shop noises in the background. More of a distraction.
Nice job ! 👍
It would have been nice to know what process you did to get the chrome to shine like that
I will try it. Thank you so much.
Why ?
Good stuff!
WOW, impressive and excellent job!!
👍👍👍
Kind regards from Mallorca, Spain.
Heard of brush plating. This would had been great in the '60's & 70's as our poor man's mag was a chrome plated factory rim. Will this hold to the elements?
So some sort of magical alchemy? I’m dubious…
Absolutely brilliant!!!! Love your channel ❤👍🏴
I really need your recipe for that hydrochroming solution, and how long does it actually last?
What a load of negativity, bear in mind that not everyone is an automotive genius like most everyone on here, someone, somewhere will have learned a bit here.
very good video
Great job!
What's the name of Chrome solution your using? Great finish
Spray on "Chrome" will start peeling off in no time. Strip it, send it out for real triple chrome plating.
No, it wouldn't. Painted wheels last 10 - 15 years, depending on conditions of driving.
If you have too much money, better gold-plate them, while you are at it
No Bob is right. so- called chrome paint only lasts a few days, that’s why we don’t all have a can of it in our garage!
@@vordan7111what painted rims last ten to fifteen years . What bs
I didn't know that.
Das 4 mal mit der Arbeitszeit die da drin steck bekommt man auch schon neue Felgen. Ob das spachteln so gut ist? Wird das ganze dann nicht noch mehr Unwuchter. Wie lange die Spachtel Masse hält ist dann auch fraglich bei den ständigen Belastungen.
Looks great, what a difference
WoW😱
Something looks really strange 🤨 1:20 - 1:25 did he made two wheels?
Cool
hi , Is it possible to choose the combination of chemicals used to make chrome solution?!
Repairing a curved wheel is madness, and a waste of money. It's cheaper to buy a new one.
But that is what he loves doing, so it is not a waste of anything to him. All that matters is how HE feels after he did it. What any of us think on the negative side does not matter.
With all due respect to the master. I will still ask. Was it worth the money and time spent?
Очень хорошо 👍👍👍
Can you share the chemicals required for chrome finish
Wow. fantastic
Oll my friends
Know the lowrider
The lowrider
it's a little higher
Tutututu tututu tututututu
👍Nice job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Красота ❤
I've seen this chroming process before and still not convinced that there is such a thing.
Silbernitrat, habe ich 1994 selber angewendet. Hält nur wenige Stunden ohne Versiegelung
Its amazing !!! how you did this?? ITS AMAZING!!!!! NICE JOB!!!
Daremna robota.
Amazing job, thanks for sharing.
New rims are so cheap that (even in a low income country) this makes little sense. If you have some special rims at hand, it's another story ofc.
Very Impressive🧐
Why not just place the wheel in a vat of Evap-o-rust? I've removed rust from many items using it; the stuff works like magic in releasing the rust from the metal without affecting the core material. And it can be filtered/separated for reuse over and over. It has zero toxicity and is pH neutral.
Very Nice! What is in those 2 spray bottles?
2 components of chemical chrome solution
@@LowMileageChannel I've heard that the way you've done it is particularly difficult, based on the measurements of the fluids involved and the time they have to work - and the time to rinse th solution. Beautiful work, btw!
Silver nitrate.
Looks Great!
Probably should’ve picked a nicer wheel. 20 hours to fix a wheel that’s worth maximum $80 is not efficient lol
Yeah absolute waste of bloody good time & resources which could be spent far better on something else!! Mind you this method migh be good if you were repairing something like Ben Hur's wooden chariot wheels!! I have to conclude therefore that this guy simply has far too much free time & so obviously with nothing better to do!!
Ver good Thank you❤
Nice job.
Amazing? When having a load of spare time on your hands... put it into makeshift restoring something with longevity close to none.
Different level
Lohnt sich der Aufwand und Materialeinsatz?
Diese Felge bekomme ich neu für unter 30€...
I wish I had a pound for every time ive been told chrome is a process NOT a paint finish. This just too unbelieveable.
Przepięknie jest to zrobione A jak tam srebrna farba się nazywa coś pomalował tą felgę Pozdrawiam cię serdecznie. 👍👍👍👍👍👍
I got the same results but with different grit sandpaper and soapy water. Very time consuming but worth it.
no gloves amazing
Gerat job
Amazing
Please what chemicals did you mix
До первой грязи😂
Pretty cool,but isnt a new set of steelies relatively cheap?
I think the whole process was for the video.
But steel wheels don't look like mirror finish chrome.
Two completely different levels of appearance!
It's ok but hardly AMAZING especially that finish, was expecting a miles better end result with that headline. PFFttttttttt.
Любому обывателю купить новый диск дешевле в 10 раз чем востановить старый диск.
Nice Result😊
If it’s a soft plastic paint it will only last a few days max.
What sorcery is this?
chemistry and magic indeed have this affinity!
Good job good job. 😎🚘 😀👏
Nice!
I'm just wondering if sandblasting is going on anyway, why do you bother using the brush, maybe to make the video longer, don't know
excellent ❤
i'm not a wizard....i'm harry
Nice job, it looks amazing
Die guten Gislaved Reifen aus 2003
nice work
I will never buy anything named Progressive.
beau travail.FÉLICITATION
Wouldn't it be easier to laser clean the rim? Definitely way faster and therefore more cost-effective...
Amazing!
How you chrome that with plastic spray bottles ?????
This is hydrochrome chemical chrome solution.
genial y que? productos utilizaste?
That's great if it's true but he not telling you what you have to do the process to get the Chrome to shine like that
Amazing job but....why waste that time and resources on a steel, cheap wheel?
wasn't it interesting to see the whole process to make it possible?
@@LowMileageChannel it was super interesting and, as i sayed, amazing job. Im just honestly curious to which point is it worth to restore such a cheap equipment to that state...Im not demoralizing what u did.
I lost a finger watching this video
Who chemically chromes NV200 rims?
Interesting but it would have been more informative if you had given details step by step of what chemicals you were using.