BBK Throttle Body Install on a NEW EDGE Mustang GT!
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- Hello guys, this video is a throwback for me! I am installing a BBK throttle body and Airaid intake! I have linked more information below!
This is not a sponsored video!
Links to Products:
www.americanmu...
www.americanmu...
TOOLS REQUIRED
1/4 or 3/8 Drive Ratchet
5/16 socket
10mm deep socket
3 extension
4 and 6mm Allen wrenches
Small pliers
Links to other videos and websites!
www.americanmu...
• 1999-2004 Mustang GT P...
More videos to come and I hope you have enjoyed what I have put out so far!
Make sure to follow!
Instagram: @jqonthego
Twitter: JQOnTheGo
Email: jqonthego@gmail.com
Song: Chris Lehman - Arrival (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Chris Lehman - Arrival...
Song: Fredji - Welcome Sunshine (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Fredji - Welcome Sunsh...
I have the 81 mm BBK combo. I suggest to get the car tuned so everything runs well together. I have a SCT bama. I got a custom tune on it from a local tuner. It works so well with my full bolt on build.
This is definitely a good recommendation and comment! If you don't get a tune, the car can still run properly...but a tune can help refine the experience.
Personally, on my 99 GT, I did order a 93 Bama tuner, but the car run properly and the shift points were rough! When I would do full-throttle acceleration the car would not shift and would go directly to redline...American Muscle tried to fix this issue and they stated it was due to the computer in my car. Some of the 99s specifically had different computers. I am not too sure about the validity of this statement but they AM stated it was from the change of sn95 to New Edge.
Best of luck with your build!
Nice video. 👍👍 to dad with helping out
Thank you! I know, always great to get another set of hands especially if they have car knowledge!
i have the junk dorman intake manifold so i hope i break it really badly
Did you see wet oil in the intake around the rim?
Personally, I did not see that on my car.
Did you have problems after installing this product I have the 78 mm bbk tb and had issues with my rpms
After when you install the product, make sure you are adjusting the throttle sensor! I had to move my throttle sensor up and down while the car was running to get the correct idling RPM that I liked. The censor should have two Phillips head screws and should be black in color. I hope this helped! My apologies for commenting back late!
Did you see a difference in throttle response, acceleration, or the engine sounding different (like louder than stock)?
Im thinking of following the same set up you did on my 2002 Mustang GT.
Thanks in advance👍
I would say so! The throttle response was better, the higher RPMs improved greatly.
I made another video about acceleration (0 to 60). The video was with all bolt-on parts, but you can see how the modifications would work.
In terms of sound, I don't believe the parts made the car louder. If the car did have a change in sound, I couldn't hear it much...cause I had Borla Ataks!
Overall, I never had any problems with the parts and the new owner says the same! Plus, I did not need to tune the car for the parts. (you can, but I didn't!)
I believe all of these modifications are great and there are lots of videos on TH-cam to help you! If you haven't worked on your car before, make sure to take your time!
If you need any more help or have other questions, message me on Instagram!
@@jqonthego thanks for the reply boss!!👍👍
@@joser3613 Of course! Good luck with your ride! Drive safe.
@@jqonthego Thanks boss!!!
Just installed it and wow i was missing on a lot!