Thank You!!! searched all over the internet for my make and model of Kenwood car stereo,for the wiring diagram.. everything but!! Found your video on TH-cam went directly to it. "Nice" again, thanks!
Solid. I have a Kenwood deck and i’ve been hooking up Pioneer and Sony’s for 20 years... The Brown and the light blue wires had me scratching my head for the last 20min. You were the ONLY person/link i found that broke this down just how i needed it done:) Stereo On and Bumping. Project Complete
Good day my friend I have a Kenwood dnx891hd and all of a sudden it comes on but says offset dc or something like that I can't find anything that is helping me online and you tube do you have any clue how to fix this or what to do any help would be great thanks.
aggghhhhh just confirming my suspicions. I wired in a kenwood single din unit the other day and decided to leave orange/white unwired because it was left capped off on the previous stereo (as the previous stere was in fact not stock, but an AIWA stereo). NOW I gotta go tear off ALL the plastics AGAIN, remove those screws and rewire that orange/white. Still useful information though. Thanks guys.
I bought a Kenwood cmos-230 backup camera and I have a 2010 Toyota rav4 (that doesn't have a rca input) and I am wondering how to connect the camera either without an rca connection and/or by getting a rca line in adapter? I've been researching this for AWHILE now and can not FOR THE LIFE OF ME figure it out. I would be forever grateful to have this explained to me and broken down! :)
Great video! I haven't installed any modern stereos, but did alot of installs in the 80s-90s. Things have changed quite a bit!! Thanks for breaking all of this down.
Hey guys thanks for the help I couldn't find the color codes anywhere. You are a life saver. I have one question I had to buy the harness on line for a kenwood kdc-248u. it only has 13 wires, 16 pins. The colors are black-,red+,yellow?,orange?,blue w/white stripe(remote turn on) please tell me orange and yellow wires are.
This saved me a huge headache instead of going to Kenwood to ask. They also use to put in a wire diagram years ago. Getting cheap I see? Thanks again gentlemen!
You guys are awesome team!! But I’m so confuse because I trying to install a ddx6706s thru my txs 2011 with 10 factory speakers around in total. This harness only have 4 exits and I want to hook a new amp and upgrade everything.
Thank you for the video, I. Installing g a kenwood,bt310u, in a 92 f150, no amps or nothing, basic install, but the harness doesn't have the orange dimmer wire, it's in the factory harness, and it works, checked with a test light, I'm not sure where to hook up the dimmer wire and for some reason it doesn't show it in the manuals wiring diagram, I know it's an old radio, it came with the truck, brand new in the box, any help would be appreciated
I bought the Kenwood DPX503BT and I have a 1999 Honda Accord 4 door EX I dont have a blue antenna wire do I just leave it loose, and nothing with anything with those blue wires you were talking about I have in my car.
Could you do a video of step by step wiring of a newer Kenwood wire harness along with iDataLink and accessories including GPS, SATELLITE RADIO, BLUETOOTH, AM/FM ANTENNA, USB/AUX and including excluding using factory speaker wires. In another words, if your going to run all new speaker wires from amps and do not need the factory wires. Particularly for a 2015 Tundra NON-JBL eliminating the factory amp as well
I have a 2003 Element and it has a factory subwoofer under the radio with its own 3 wire harness. I just installed a Kenwood ddx6903s. Where can I wire in the subwoofer?
Hi, I put a Kenwood DNX875S in my SLK 280 (standard system, no amplifier) and used the adapter cable to go from European/Mercedes antenna connection to the Kenwood antenna plug, no radio reception at all. Watched your video on that as well but I do not have a clue right now if the antenna needs power.Antenna is the standard short Mercedes antenna. Can you help me?
My kenwood only has a solid blue wire. My TYTO harness has a blue wire and a blue & white wire. Do both of these need to connect to the kenwood solid blue? I’m not getting any sound but everything else is working.
Hey fernando chingones sus videos tengo una pregunta compre un estereo kenwood ddx9705s lo conecte a una ford 2012 f250 prende pero no se escucha que cters que aga falta lo conecte con un interface xsvi-5521-nav
So on the backup camera does the purple and black wire coming out of the pioneer have to be hooked up to the reverse light wire? Cant I just hook up that purple/black wire to switched 12v that way I can juat hit camera view on the screen? Isn't that wire only to display on the screen when you actually put the car into reverse?
Can I hook up a power antenna and an amplifier to the blue with white stripe at the same time, or would I have to find a different way to turn on the amplifier?
Great videos, I have been watching a lot to build my confidence. I just bought the DMX 7706, what do I do with the parking switch wire? What is its purpose? I have seen people cut and ground back to stereo, the manual says attach to accessory wire.
Just learning myself but I believe that's bypass mode , putting green wire to black , that means you can view video while the car is moving otherwise if you hook the green wire to the actual ebrake wire the video will only show if the ebrake is engaged. I may be wrong but that's what I believe. I'm about to install one dnx995s and I tied mine to the black in the harness.ill report back in a couple days once installed if you message back.
@@LookOut-km4eg at first I grounded to the stereo. Everything on the stereo worked fine. Except video. Than I grounded to the E brake. Everything works fine, except video. I dont think this stereo will mirror image the phone with the emergency brake on. Other models could this one doesnt seem to be able to play video.
@@LookOut-km4eg I wouldnt want to hook up a power wire where they want a ground. That seems like a bad idea. I would suggest for simplicity ground the Parking brake wire to under a screw at the back of the stereo.
@@david37376 lol seems like your offering me advice now. All depends on the device. It may or may not cause damage hooking up 12v where ground should be. Depends if there's a diode in the circuit ect. Most radios want the green wire grounded,but if your saying the manual says to connect your green ebrake wire to accessories wire then that tells me they want 12v not ground. Accessories wire turns 12v wire after key start, so again maybe they want 12v and not ground?
Raul Looking to mount a Kenwood KAC-M3004 in the compartment above my glovebox on my 2008 Chevy Silverado crew cab, is that location okay and enough air circulation to not cause it to overheat?
I have a Chinese sub-woofer with a blue wire (REM Connects the 12V of CD or Navigation Output blue line, general mark ACC Control Line). Do I connect this to the Blue/White wire?
How do we deal with the red wire? I have a Kennwood 893S and it won't turn on unless I put the red and yellow together. If I put red to red then the radio wont turn on and the antitheft triangle light flashes in the corner???? Thanks.
hello i just installed a kenwoodDmx47s to subs and amp, i think i messed up i hooked up the steering wheel remote that in the video with tape to amp power wire. it works fine and shuts off amp when car is shut off, but my bass cuts out here and there but the amp is still on while doing so. Now should i look for blue wire from harness and hook that up to amp power wire?
I have an Kenwood ddx7015 and I ordered the wiring harness from Kenwood but when i connect it there still is no power to radio. I checked the 10amp fuse and it's not blown. I checked 12volt source and it has power all the way up to the radio. Any suggestions???
Okay. I do not have a power antenna, nor do i have my own amp. My cars harness only has a solid blue wire and the radio harness only has blue white. Do these need to be connected for whatever reason??
Hi,thank you for your quick response.so in my case i am not putting an sub amp in my car,that means i can tape the wires from the relay off because those are not needed?thanks in advance.
I have an 03 sierra with steerwheel controls and i just bought the kenwood dmx7704s from you. I had an old pioneer that i replaced and i had the PAC SWI-CP5 that i used for the steering wheel controls. When i put the kenwood in i changed the settings on the PAC to be for the kenwood but i dont get the volume and seek to work. all the other controls on the steering wheel are working. When i press the volume on the steering wheel i see that the pac unit is responding because the light flashes but the volume doesn't change. Any ideas?
Hi, I have a Kenwood ddx9703s with a phoenix gold amp. I have RCAs out to my Amp. When I hook up both sub RCAs to my amp from the Kenwood it cuts out. When unit first comes on I hear a couple of popping sounds. Is this normal?
Ok so these wires are all the same as mentioned here? I have kenwood excelon KMM-X704? So what I am asking is are they basically the same because I lost my manual!!! And don’t know all the colors? Please help!
I got the kenwood double din 375bt and hooked up the backup cam but, how do I get my backup camera to work manually? When I press the button it keeps saying no signal.
I have a Kenwood double din and a Toyota Camry, Having a problem with my radio, all I get is static coming from the speakers. I hooked up the power antenna wire still have nothing
Okay..what happens if I go active dsp with 6 channel amp and I want to go full active on the front tweeters(dash factory tweets) and midranges..do the wires separate the tweeter and mid range or where does the signal ouput all go through the mid range? So i cannot band the pass the midrange separately?
My Kenwood ddx396 only has 2 blue wires. The blue white striped wire says amp turn on however the instructions also says to connect that wire to my antenna...???? I'm confused by this installation.
I have my back up camera on a kenwood dmx9706s and the cam button gives a black screen and i only get the camera when in reverse. Can you help me out???
Hello thanks for making the videos they help allot of people save money. I have a question I've had the Kenwood DNX890hd for awhile. I recently got the Kenwood CMOS-300 I got the radio used so I didn't know I was missing the parking brake and reverse wire purple/white.I got it to work but only when I hold the cam button so I've ordered the wire I just need to know where to hook it up because I have my reverse lights into the wire labeled reverse on the CMOS 300 harness. Do I hook the purple/white wire from the radio into the wire labeled reverse on camera harness then tie it in to the reverse light feed? Sorry if that's confusing. Also when I go to camera settings on the unit everything is gray and you can't click it. Everything except for the interruption where you turn it on and off. Is there a reason for that?
My blue and white wire has the antenna CONT stuck to it.And then one blue with yellow has steering wheel in remove input just the opposite of what you said
I have a question. I have a Kenwood KDC X399 which was fitted to a 2013 Jeep Wrangler. I since sold that car and am trying the to put the X399 into a 2016 Keep Wrangler. The Red power line is not connected to the harness I have and I'm wondering how I would connect that to the 2016 Wrangler's harness. The stock radio is getting power from somewhere so I assume I can just connect the red power wire to a port on the Wrangler's harness. Just which one is my question.
+Iain Armstrong Jeeps do not have an accessory power( red) behind the radio. They use Can data to turn on and off. You will want to get a smart harness for your install. Head over the PAC-audio.com for a list of options.
i have a question about the reverse wire. if i have a reverse camera with the yellow rca jack that plugs into the back of the unit. will i have to manually go to my camera screen while in reverse if i do not connect that purple reverse wire?. i want the reverse cam to automatically pop up as soon as i throw the vehicle into reverse
I'm just hoping the steering wheel input (light blue/yellow) off Kenwood harness isn't needed when using the maestro rr and the smart harness. There's no wire to connect it up to in the smart harness so I'm assuming the pink/red wire I have cut and connect into the sync harness will be the steering wheel input? Anyone know? 2012 Ford fusion dnx995s, maestro rr, and the idatalink fo1 harness.thanks
i need the cable configuration setup for the remote plug as it came off.A photo will be of great help. model ksc-sw1 remote (the device with the two knobs)
Hey FSCS, do you guys know where I can purchase a wireless remote for my Kenwood KMM-BT260U? I bought the stereo brand new at Walmart but sadly it didn’t come with a remote control. It said on the box that i can get a Kenwood remonte app, found like 3 but none of them worked for my KMM-BT260U
What are the odds that a already wired Kenwood kdc mp342u power harness will work in a new ddx25bt? Can I pull one radio out and plug in the new one or do I need to wire up a new harness. Thanks you guys are great!
a question Guys: just with this harness, can I install a kenwood 2 din car stereo? because I'm buying a used radio but the seller just includes the unit and the harness, anything else. But actually my car has a 2 din radio, I just will replace the device. What do you think? thanks a lot.
hey guys; got a kenwood. Still don't understand what you meant re: the blue wires. Sorry. I have a blue & a blue with a white stripe coming out of my two different nissan harness plugs. The kenwood plug has just one blue wire. Do I hook both of those together in a "Y" to the kenwood blue wire?? Thx much! Mike
Great video. Helped out a lot, but I have a question I'm sure you can answer. I just bought a Kenwood DNX572BH and it doesnt have the 'parking break' or 'reverse' wires on it. Im replacing my old DNX6190HD that has those wires on the harness that was using an AXXESS CHTO-013BB interface module. The radio sounds great but I dont have a back up camera and my video screen always says "Parking brake off", do I need to buy a new interface module? I drive a 2009 Jeep JKU. Thanks for your help in advance.
on the back of the radio there is a white 4 pin plug input. That input is where the break and reverse wire would be located. The radio should have come with it, if not you can order it from Kenwood.
Hi,got a question;i have a 2din Kenwood DNX8220bt,and i see that i have 2 cables connected to a plug that says RELAIS.what is the purpose of those cables and is it needed to connect since the unit is already power by ACC etc
Rabin Boedhoe those wires are outputs for relays. The radio has the ability to turn on and off 2 things connected to those wires. For example if you added a fan for an amp, you could turn them on and off from the radio.
Thank You!!!
searched all over the internet for my make and model of Kenwood car stereo,for the wiring diagram.. everything but!! Found your video on TH-cam went directly to it. "Nice" again, thanks!
Thank you for watching, enjoy
Deff a huge help. Bought a kenwood and couldnt find out the swc wire to save my life. Thanks a million
Solid. I have a Kenwood deck and i’ve been hooking up Pioneer and Sony’s for 20 years... The Brown and the light blue wires had me scratching my head for the last 20min. You were the ONLY person/link i found that broke this down just how i needed it done:) Stereo On and Bumping. Project Complete
Good day my friend I have a Kenwood dnx891hd and all of a sudden it comes on but says offset dc or something like that I can't find anything that is helping me online and you tube do you have any clue how to fix this or what to do any help would be great thanks.
Appreciate this! Helps clear a little confusion with the pinout on the manual...
Thank you! Helps to understand what each wire does
aggghhhhh just confirming my suspicions. I wired in a kenwood single din unit the other day and decided to leave orange/white unwired because it was left capped off on the previous stereo (as the previous stere was in fact not stock, but an AIWA stereo). NOW I gotta go tear off ALL the plastics AGAIN, remove those screws and rewire that orange/white. Still useful information though. Thanks guys.
I bought a Kenwood cmos-230 backup camera and I have a 2010 Toyota rav4 (that doesn't have a rca input) and I am wondering how to connect the camera either without an rca connection and/or by getting a rca line in adapter? I've been researching this for AWHILE now and can not FOR THE LIFE OF ME figure it out. I would be forever grateful to have this explained to me and broken down! :)
You guys make the best videos thank you all the information.
Great video! I haven't installed any modern stereos, but did alot of installs in the 80s-90s. Things have changed quite a bit!! Thanks for breaking all of this down.
Hey guys thanks for the help I couldn't find the color codes anywhere. You are a life saver. I have one question I had to buy the harness on line for a kenwood kdc-248u. it only has 13 wires, 16 pins. The colors are black-,red+,yellow?,orange?,blue w/white stripe(remote turn on) please tell me orange and yellow wires are.
How do you wire in a dc filter on the rear view camera on a kenwood DMX7706S
Man...how I miss those ECKO t- shirts👌
Thank you for this video, it's very informational. I have Kenwood KDC-225MR (Marine). Can I use a KDC-225 {Autmotive) face plate on it? Thanks !
This saved me a huge headache instead of going to Kenwood to ask. They also use to put in a wire diagram years ago. Getting cheap I see?
Thanks again gentlemen!
Glad we could help, thanks for watching.
Fairly universal across a lot of radios with some small changes between decks.
You guys are awesome team!! But I’m so confuse because I trying to install a ddx6706s thru my txs 2011 with 10 factory speakers around in total. This harness only have 4 exits and I want to hook a new amp and upgrade everything.
Thank you for the video, I. Installing g a kenwood,bt310u, in a 92 f150, no amps or nothing, basic install, but the harness doesn't have the orange dimmer wire, it's in the factory harness, and it works, checked with a test light, I'm not sure where to hook up the dimmer wire and for some reason it doesn't show it in the manuals wiring diagram, I know it's an old radio, it came with the truck, brand new in the box, any help would be appreciated
Very helpful, thanks guys. ❤
Great video, thanks guys!
I bought the Kenwood DPX503BT and I have a 1999 Honda Accord 4 door EX I dont have a blue antenna wire do I just leave it loose, and nothing with anything with those blue wires you were talking about I have in my car.
Thanks good sir Mr dean Good day to u mate 👍🏾
Could you do a video of step by step wiring of a newer Kenwood wire harness along with iDataLink and accessories including GPS, SATELLITE RADIO, BLUETOOTH, AM/FM ANTENNA, USB/AUX and including excluding using factory speaker wires. In another words, if your going to run all new speaker wires from amps and do not need the factory wires. Particularly for a 2015 Tundra NON-JBL eliminating the factory amp as well
I have a 2003 Element and it has a factory subwoofer under the radio with its own 3 wire harness. I just installed a Kenwood ddx6903s. Where can I wire in the subwoofer?
What are the wires on key wire plug that come with the kenwood DPX524BT
Thank you. Helped me resolve some questions with the blue wires for my new Excelon.
The orange or orange and white wire for illumination is that a power coming from the radio or is it a negative coming for the radio
Do you have a video on how to hook up that plug to an aswc-1 interface?
Thank you so much ! Helped me out way more then anyone could think !
I get no am reception on my kenwood dmx 4707s and 2010 Explorer with the metra antenna adapter. What should i do with the blue wire?
Can you guys tell me when the Kenwood kdc-3090ra cd player came out in what year was it released, thanks..
Can I piggy back both antenna and amp off the blue/white stripe wire as there is no plain blue wire?
Thanks
I have a kenwood dmx125… where do I connect the remote wire for my amplifier? I can’t seem to see a blue and white wire
Can you tell me how to wire my kenwood kdc309 to a 12v battery in my shed
Hi, I put a Kenwood DNX875S in my SLK 280 (standard system, no amplifier) and used the adapter cable to go from European/Mercedes antenna connection to the Kenwood antenna plug, no radio reception at all. Watched your video on that as well but I do not have a clue right now if the antenna needs power.Antenna is the standard short Mercedes antenna. Can you help me?
My kenwood only has a solid blue wire. My TYTO harness has a blue wire and a blue & white wire. Do both of these need to connect to the kenwood solid blue? I’m not getting any sound but everything else is working.
Pls elaborate on how to hook the light blue and yellow to the interface??
I noticed that my Kenwood DMX125BT does not have that typical orange illumination wire....
And makes the buttons on the left of the screen difficult to see at night! These buttons light up but not the wording/icons....
Hey fernando chingones sus videos tengo una pregunta compre un estereo kenwood ddx9705s lo conecte a una ford 2012 f250 prende pero no se escucha que cters que aga falta lo conecte con un interface xsvi-5521-nav
So on the backup camera does the purple and black wire coming out of the pioneer have to be hooked up to the reverse light wire? Cant I just hook up that purple/black wire to switched 12v that way I can juat hit camera view on the screen? Isn't that wire only to display on the screen when you actually put the car into reverse?
I have a DNX573S. Where exactly does the Illumi wire connect to in the cars light switch?
Can I hook up a power antenna and an amplifier to the blue with white stripe at the same time, or would I have to find a different way to turn on the amplifier?
Did you ever find a solution I ran into the same problem
Great videos, I have been watching a lot to build my confidence. I just bought the DMX 7706, what do I do with the parking switch wire? What is its purpose? I have seen people cut and ground back to stereo, the manual says attach to accessory wire.
Just learning myself but I believe that's bypass mode , putting green wire to black , that means you can view video while the car is moving otherwise if you hook the green wire to the actual ebrake wire the video will only show if the ebrake is engaged. I may be wrong but that's what I believe. I'm about to install one dnx995s and I tied mine to the black in the harness.ill report back in a couple days once installed if you message back.
@@LookOut-km4eg at first I grounded to the stereo. Everything on the stereo worked fine. Except video. Than I grounded to the E brake. Everything works fine, except video. I dont think this stereo will mirror image the phone with the emergency brake on. Other models could this one doesnt seem to be able to play video.
@@david37376 so I just noticed you said the manual says to connect to the acc. Maybe that's what it needs +12v instead of a ground?
@@LookOut-km4eg I wouldnt want to hook up a power wire where they want a ground. That seems like a bad idea. I would suggest for simplicity ground the Parking brake wire to under a screw at the back of the stereo.
@@david37376 lol seems like your offering me advice now. All depends on the device. It may or may not cause damage hooking up 12v where ground should be. Depends if there's a diode in the circuit ect. Most radios want the green wire grounded,but if your saying the manual says to connect your green ebrake wire to accessories wire then that tells me they want 12v not ground. Accessories wire turns 12v wire after key start, so again maybe they want 12v and not ground?
The blue with yellow that's says remote that'll go to the wired remote on the marine setup correct.
can you use rca outputs on rp4-mz11 on a kenwood kdc-bt778hd
Really a great help thank you
Where can I connect the illumination wire on a Passat b6? Hope you can help thanks
Raul
Looking to mount a Kenwood KAC-M3004 in the compartment above my glovebox on my 2008 Chevy Silverado crew cab, is that location okay and enough air circulation to not cause it to overheat?
I have a Chinese sub-woofer with a blue wire (REM Connects the 12V of CD or Navigation Output blue line, general mark ACC Control Line). Do I connect this to the Blue/White wire?
How do we deal with the red wire? I have a Kennwood 893S and it won't turn on unless I put the red and yellow together. If I put red to red then the radio wont turn on and the antitheft triangle light flashes in the corner???? Thanks.
HEY!! this may be a crazy question but what do i put the purple wires to?? i do not have any purple on my other set of wires!!
Purple is right rear positive speaker output
Purple white is reverse trigger
hello i just installed a kenwoodDmx47s to subs and amp, i think i messed up i hooked up the steering wheel remote that in the video with tape to amp power wire. it works fine and shuts off amp when car is shut off, but my bass cuts out here and there but the amp is still on while doing so. Now should i look for blue wire from harness and hook that up to amp power wire?
So which one is the amp turn on? My amp is going to protect mode
The brown wire also mute the radio when in reverse.
Hey mate which one do I wire up to my sub?
I have an Kenwood ddx7015 and I ordered the wiring harness from Kenwood but when i connect it there still is no power to radio. I checked the 10amp fuse and it's not blown. I checked 12volt source and it has power all the way up to the radio. Any suggestions???
On a jvc head unit does the reverse wire have any voltage coming out
Okay. I do not have a power antenna, nor do i have my own amp. My cars harness only has a solid blue wire and the radio harness only has blue white. Do these need to be connected for whatever reason??
Hi,thank you for your quick response.so in my case i am not putting an sub amp in my car,that means i can tape the wires from the relay off because those are not needed?thanks in advance.
Rabin Boedhoe yes just cap them off if you want to use them. It was not a popular feature
How could I hook up my amp to the blue and white wire if it’s already being used because I don’t have the solid blue wire
You can connect more than one device to the blue white wire. It can turn on the amp and the antenna
I have an 03 sierra with steerwheel controls and i just bought the kenwood dmx7704s from you. I had an old pioneer that i replaced and i had the PAC SWI-CP5 that i used for the steering wheel controls. When i put the kenwood in i changed the settings on the PAC to be for the kenwood but i dont get the volume and seek to work. all the other controls on the steering wheel are working. When i press the volume on the steering wheel i see that the pac unit is responding because the light flashes but the volume doesn't change. Any ideas?
do you connect the blue yellow wire from the maestro rr to Kenwood ?
hey How would i Plug up my OEm Stereo to my amps? my avh 270bs gave out and is in for repair but Music is life.
Get a hi to low adapter like the Pac-Audio LP3-4 or 2 depending on how many channels you need. Thanks for watching
Hi, I have a Kenwood ddx9703s with a phoenix gold amp. I have RCAs out to my Amp. When I hook up both sub RCAs to my amp from the Kenwood it cuts out. When unit first comes on I hear a couple of popping sounds. Is this normal?
+Teraman no that is not normal. That usually means there is a wire touching ground or a bad speaker
Ok so these wires are all the same as mentioned here? I have kenwood excelon KMM-X704? So what I am asking is are they basically the same because I lost my manual!!! And don’t know all the colors? Please help!
I got the kenwood double din 375bt and hooked up the backup cam but, how do I get my backup camera to work manually? When I press the button it keeps saying no signal.
is it safe to connect 15.8 volts to the memory wire?
Hello, so is the green parking sensor wire is grounded to the back of the unit itself, is that correct??
I have a Kenwood double din and a Toyota Camry,
Having a problem with my radio, all I get is static coming from the speakers. I hooked up the power antenna wire still have nothing
Do i leave antenna wire off completly?
Okay..what happens if I go active dsp with 6 channel amp and I want to go full active on the front tweeters(dash factory tweets) and midranges..do the wires separate the tweeter and mid range or where does the signal ouput all go through the mid range? So i cannot band the pass the midrange separately?
My Kenwood ddx396 only has 2 blue wires. The blue white striped wire says amp turn on however the instructions also says to connect that wire to my antenna...???? I'm confused by this installation.
Tickle me Elmo is there did you see him !? 🙀😼😺
I have my back up camera on a kenwood dmx9706s and the cam button gives a black screen and i only get the camera when in reverse. Can you help me out???
Hello thanks for making the videos they help allot of people save money. I have a question I've had the Kenwood DNX890hd for awhile. I recently got the Kenwood CMOS-300 I got the radio used so I didn't know I was missing the parking brake and reverse wire purple/white.I got it to work but only when I hold the cam button so I've ordered the wire I just need to know where to hook it up because I have my reverse lights into the wire labeled reverse on the CMOS 300 harness. Do I hook the purple/white wire from the radio into the wire labeled reverse on camera harness then tie it in to the reverse light feed? Sorry if that's confusing. Also when I go to camera settings on the unit everything is gray and you can't click it. Everything except for the interruption where you turn it on and off. Is there a reason for that?
My blue and white wire has the antenna CONT stuck to it.And then one blue with yellow has steering wheel in remove input just the opposite of what you said
Good job man
What about the blue with green? And the green with red?
I have the Kenwood dmx7705s, can you tell me what the pink wire is for, it wasn’t labeled. The manual didn’t explain what it was for.
Thanks
Kash Addict u ever find an answer
I have a question. I have a Kenwood KDC X399 which was fitted to a 2013 Jeep Wrangler. I since sold that car and am trying the to put the X399 into a 2016 Keep Wrangler. The Red power line is not connected to the harness I have and I'm wondering how I would connect that to the 2016 Wrangler's harness. The stock radio is getting power from somewhere so I assume I can just connect the red power wire to a port on the Wrangler's harness. Just which one is my question.
+Iain Armstrong Jeeps do not have an accessory power( red) behind the radio. They use Can data to turn on and off. You will want to get a smart harness for your install. Head over the PAC-audio.com for a list of options.
i have a question about the reverse wire. if i have a reverse camera with the yellow rca jack that plugs into the back of the unit. will i have to manually go to my camera screen while in reverse if i do not connect that purple reverse wire?. i want the reverse cam to automatically pop up as soon as i throw the vehicle into reverse
If you want it to pop on, you have to connect the Purple/ white wire to the reverse light wire. If not, yes you will have to turn it on manually.
Now which one is REMOTE AMPLIFIER? pls answer
So I can’t find a blue with white stripe and need a remote wire for my new rockfords
I'm just hoping the steering wheel input (light blue/yellow) off Kenwood harness isn't needed when using the maestro rr and the smart harness. There's no wire to connect it up to in the smart harness so I'm assuming the pink/red wire I have cut and connect into the sync harness will be the steering wheel input? Anyone know? 2012 Ford fusion dnx995s, maestro rr, and the idatalink fo1 harness.thanks
"Just hook up everything the the blue and white wire." Ok where is this everything?
So I hook my amp up to the blue and white wire to cut my amp off when the cars off
i need the cable configuration setup for the remote plug as it came off.A photo will be of great help. model ksc-sw1 remote (the device with the two knobs)
Hey FSCS, do you guys know where I can purchase a wireless remote for my Kenwood KMM-BT260U? I bought the stereo brand new at Walmart but sadly it didn’t come with a remote control. It said on the box that i can get a Kenwood remonte app, found like 3 but none of them worked for my KMM-BT260U
Another note, I prefer the OEM Kenwood remote, not some crappy knock-off version
Never mind about the remote, I no longer have my Kenwood unit
What does the reverse wire do? I don’t have a back up camera in my Jeep do I still need it?
Then no. Just tape it up.
Do you know how to reset kenwood mdv-z700?
Hey guys, how can i install that stereo? (Kenwood DDX790) maintaining my factory amp in a honda civic SI 2009?
Can I install a switch to create a mute function?
Thanks for the kenwood antenna wire... it works!!! I use the blue white....
If you have a factory amp, do you use the blue and white wire to turn it on? Thanks guys great videos!
What are the odds that a already wired Kenwood kdc mp342u power harness will work in a new ddx25bt? Can I pull one radio out and plug in the new one or do I need to wire up a new harness. Thanks you guys are great!
Unfortunately they are totally different
Five Star Car Stereo very well, thanks!
a question Guys: just with this harness, can I install a kenwood 2 din car stereo? because I'm buying a used radio but the seller just includes the unit and the harness, anything else. But actually my car has a 2 din radio, I just will replace the device. What do you think? thanks a lot.
hey guys; got a kenwood. Still don't understand what you meant re: the blue wires. Sorry. I have a blue & a blue with a white stripe coming out of my two different nissan harness plugs. The kenwood plug has just one blue wire. Do I hook both of those together in a "Y" to the kenwood blue wire?? Thx much! Mike
Michael Robert Guertin
Did you ever figure this out I'm having the same issue right now. Thanks
how to remove protect mode dnx572 yes I have pushed the reset button and nothing still
Great video. Helped out a lot, but I have a question I'm sure you can answer. I just bought a Kenwood DNX572BH and it doesnt have the 'parking break' or 'reverse' wires on it. Im replacing my old DNX6190HD that has those wires on the harness that was using an AXXESS CHTO-013BB interface module. The radio sounds great but I dont have a back up camera and my video screen always says "Parking brake off", do I need to buy a new interface module? I drive a 2009 Jeep JKU. Thanks for your help in advance.
on the back of the radio there is a white 4 pin plug input. That input is where the break and reverse wire would be located. The radio should have come with it, if not you can order it from Kenwood.
+Five Star Car Stereo I bought it "open box" from best buy, thank you for your help
+dd4406 you can get parts from pacparts.com
Hi,got a question;i have a 2din Kenwood DNX8220bt,and i see that i have 2 cables connected to a plug that says RELAIS.what is the purpose of those cables and is it needed to connect since the unit is already power by ACC etc
Rabin Boedhoe those wires are outputs for relays. The radio has the ability to turn on and off 2 things connected to those wires. For example if you added a fan for an amp, you could turn them on and off from the radio.
How do I use the climate control on a Kenwood ddx6906s double din ?