Does a yz 250 2001 engine fit in a yz 125 2001 I was wanting to put a 250 in my 125 thanks I have learned so much from you I have rebuilt my engine only trouble I had was the clutch was engaged all the time but it was warp discs thank you saved so much money
this was an amazing video! i actually rebuily a yz125 and there are a few issues that i just couldnt figure out. 1. the gear shifter moves kind freely with some type of clicking, so basically it doesnt go i to gear
Ok my 1994 yz 250 I was jumping and then I notice my dirt bike wasn’t moving with any gas throttle so I tried to down shift and nothing happen what Does that mean
This was very helpful. I am going to be replacing my kickstarter tomorrow and need to remove the entire clutch basket to get to it, is there a certain way to remove the clutch line I cant figure it out
Hey man I just used your clutch install video for the 1994-2001 YZ125 to reinstall my clutch on my 99. I did everything exactly as you did it but when I put the clutch cover back on and connect the clutch cable to the clutch release thing that moves the push-piece there is zero tension in the clutch lever
I've done everything I think I can do on the CR. If you have a question or need help with something let me know! th-cam.com/play/PLYumG-X2tyIOv6tPUDiHWlQeHa650MSva.html
@@Fixyourdirtbike I just bought a 97 cr250 she’s been rode hard but it’s got a solid built engine and good frame everything else I’m replacing I’ve literally watched every one of your videos on it
Oh nice! Ok, yeah I finished it up last year but lack of income makes it hard to get anywhere to actually ride. I took it to Colorado last August, but I gave up trying to jet it right to run above 11,000 feet. Why screw with it when I have an FI 450 and my KTM with a Lectron ya know?
*Intro - **0:00** | Removal: Clutch Pack - **0:33** | Removal: Inner/Outer - **1:02** | Clean & Inspect - **1:38** | Install - **4:31** | Install: Outer/Inner - **4:45** | Install: Clutch Pack - **5:25** | Install: Pressure Plate - **5:48** | Install: Cover/Lever - **6:39** | Full Rebuild Guide → **bit.ly/9401yz125cl*
Does a yz 250 2001 engine fit in a yz 125 2001 I was wanting to put a 250 in my 125 thanks I have learned so much from you I have rebuilt my engine only trouble I had was the clutch was engaged all the time but it was warp discs thank you saved so much money
this was an amazing video! i actually rebuily a yz125 and there are a few issues that i just couldnt figure out. 1. the gear shifter moves kind freely with some type of clicking, so basically it doesnt go i to gear
Did you take apart or service the external clutch mechanism?
Thank you very much!!! This video helped so much!!
Ok my 1994 yz 250 I was jumping and then I notice my dirt bike wasn’t moving with any gas throttle so I tried to down shift and nothing happen what Does that mean
What size socket do I need to take off clutch after I flatten washer?
hey should the push piece be able to move freely?
Yes, the push piece should spin freely.
thanks
This was very helpful. I am going to be replacing my kickstarter tomorrow and need to remove the entire clutch basket to get to it, is there a certain way to remove the clutch line I cant figure it out
Glad it helped!
Hey I was riding today and that part where the cable connects and there's that little spring came loose and my clutch lever was no use.
Hey man I just used your clutch install video for the 1994-2001 YZ125 to reinstall my clutch on my 99. I did everything exactly as you did it but when I put the clutch cover back on and connect the clutch cable to the clutch release thing that moves the push-piece there is zero tension in the clutch lever
Did you solve this problem?
I have the same issue 😕
Did you figure this out?
@Fixyourdirtbike
How do I fix my bike it turns on but won't get the gears
I have a question
Hey man any updates on the 97 Cr
I've done everything I think I can do on the CR. If you have a question or need help with something let me know! th-cam.com/play/PLYumG-X2tyIOv6tPUDiHWlQeHa650MSva.html
@@Fixyourdirtbike I just bought a 97 cr250 she’s been rode hard but it’s got a solid built engine and good frame everything else I’m replacing I’ve literally watched every one of your videos on it
Oh nice! Ok, yeah I finished it up last year but lack of income makes it hard to get anywhere to actually ride. I took it to Colorado last August, but I gave up trying to jet it right to run above 11,000 feet. Why screw with it when I have an FI 450 and my KTM with a Lectron ya know?
@@Fixyourdirtbike tru
What is the model of your yz125?
2001
6:33 "88 In-lbs, how many nm or kg?"