Flip kit and C-Notch on the OBS Silverado

I bought the cheapest flip kit I could find on Amazon and used a C-Notch that I had laying around from another project. The c-notch is meant for a 99-2007 frame so I had to modify it for this truck.

[@andrewvitale2556]

This is real world building not like the unlimited budget nonsense everyone sees on tv.

[@rolandocantujr.48]

El cuhh adrian 👏 putting work

[@christrent8618]

Great video brother thanks

[@venomousproductions7539]

You bet

[@dylansands3935]

Use air shocks to adjust height

[@scottrockett6382]

Can you link the kit? I like that it has the top hat support also. Some kits put the u-bolt pressure right on the axle.

[@1loud95obs3]

Did the 2002 rear shocks work good or does it ride roughly?

[@Thatloud1500]

Looks great but that c notch kit is a lil sketch.

[@venomousproductions7539]

Yea it was meant for a different model

[@schalachi]

New springs or add a leaf.

[@downtoearthconstruction7768]

Add a leaf spring

[@thatrebelboy48]

Do you remember what size u bolts you got for your kit? The square ones

[@venomousproductions7539]

I used the stock ones that came on the truck

[@user-qg4nl3vp1h]

Could of just removed the leaf springs,to flip the differential,put stock leaf springs,and use shock extenders,so stock shocks can still be used,those crazy paisa cheddars 🧀,its ok for me to say that cuz im a paisa cheddar 🧀 lol,but i istill didnt do a half nass flip job on my g-pas chevy obs ,but those folks still had the right idea how to flip the rear end,they just did extra work that didn't have to be done

[@ManuelMartinez-td6gl]

Bro si hablas español no hay problema con el angulo de la barra cardan

[@venomousproductions7539]

La barra no topa en nada pero aun no bajo la parte de el frente, no se que matiguadores comprarle...

[@ManuelMartinez-td6gl]

@@venomousproductions7539 Es lo que queria saber

[@primocazares2986]

@@venomousproductions7539 ponle de una s10 97 esos le quedan al puro chingazo , esos los uso yo para el flipkit , enfrente los mismos originales jalan .

[@Chevro91]

Bro don’t even show which way the off set hole for the leaf pin is placed

[@josehuerta1278]

Ponle los shakos orijinales y asi no baja mucho.

[@venomousproductions7539]

Son los que use

[@mr.numbers6174]

The leafs are weak..that's y it went lower

[@venomousproductions7539]

I used the same leafsprings...

[@mrbigbuds1745]

You removed one ?

[@venomousproductions7539]

​@@mrbigbuds1745no, i reused the same ones...

[@user-wx9ut8uh1m]

Yeah but your leafs look weak. They look compressed cause of weakness. You need new leafs

[@devonfields1243]

That video would have been WAYYYYYY better without that 💩as music