Brilliant walk thru. I never knew release and analogue reverb were cpu intense. Great to know. I'm in the habit now, off any older song's, I set the master level at 20, then setup the compressor. It's fantastic 👏 😀 👌 cheers 🍻
Glad it was helpful! CPU stuff is definitely tricky and a combination of things, but things like voice count and extended release can definitely make a quick difference (especially with multisampled instruments). The new CPU indicator is a great help
great upload....Personally, I'd like to see the coloured pads brighter (vs the ambient light) for this type of tutorial, (I have a hard time reading your 7 seg. display) but the info and overall presentation are excellent. Can't believe how archaic is seems to see this display, now that I'm so spoiled by the OLED version..........great info.....thanks v much........your videos are excellent, especially the sound, eq and mixing of your V.O. overtop.....unsurpassed!
Thanks. I can definitely see the value of the OLED display, but not enough to make me give up my beloved 7SEG. Ha. As for lighting, you've mentioned it on a few videos now. I personally like the balance here
I just played around with a bit and didn't notice any clicking. I imagine with stutter it would depend on timing too, but I couldn't get it to overtly click
This is exactly what I was looking for with the new firmware, thanks Bay Mud!! Very excited to sit down with my Deluge and mess with these new features myself! =P
Hey thanks! Glad to hear it. So many more features I didn't have time (or expertise) for, so take a look at the docs if you're curious. So many more features on the way too!
It's hard to tell what's around the corner. I can sympathize with unloading gear you're not inspired by at the time. Hopefully you can find you're way back if it suits you!
@@BayMud I actually had it alongside push3 standalone and chose that instead. It's a hugely fun bit of kit but i have live on my mac and should just leave it there really.
@@BayMud I have been thru a lot of GAS and I honestly wish I'd just stayed with the mac for the heavy lifting and my deluge for the fun portable jamming. It'll happen again I'm sure!
Thanks! Yeah, so many new features that I wanted to make sure I highlighted a few of the smaller ones that don't get as much attention as grid mode, etc. Hopefully more to come!
had no idea there was a brightness default, my life has been improved lol thank you stellar_aria did such a fantastic job with the rings verb port, didn't even think to adjust the HPF and dampening to focus the tone of it iirc the flashing play button indicates something has been culled, but as you said we don't really notice it sometimes. If you have like 4 notes playing and you have 4 synth voices, then that'll be playing 16 total voices as the notes are releasing, so when you ask deluge to play a new note with the previous notes releasing, if play starts flashing it might have culled a couple of those voices and start playing 4 more so you'd have like 18 total voices playing and releasing OMG when was save/load defaults added to performance view???
Ha. I figured starting with the brightness setting would be helpful to someone! Hard to keep up with the progress---I remember testing the ability to save/load multiple sets of performance view settings at one point too (and crossfading between them!), which was super fun, so hopefully that makes it back in. CPU stuff is always tricky. I mostly just wanted to make it clear to people that just because the play button is blinking doesn't mean you'll hear anything "wrong". I love that we have an indicator to know when we're pushing the limits (and can also turn if off when it's yelling at me. Ha)
Fantastic video! And love that someone is still rocking the 7seg!
Thanks! Yeah, I'm 7SEG for life (or at least until I decide otherwise, ha)
Good to see videos covering stuff i did not !!!
Thanks Ron! Still going through your videos so I can someday dive into Grid Mode. Ha
Very informative video. Keep up the good work. I appreciated the way that you explained each step slowly at pace I could follow.
Thanks for the kind words! Glad you found it helpful. Hopefully more to come
"Trusty 7segment display"
I'm a holdout. Ha
Brilliant walk thru. I never knew release and analogue reverb were cpu intense. Great to know. I'm in the habit now, off any older song's, I set the master level at 20, then setup the compressor. It's fantastic 👏 😀 👌 cheers 🍻
Glad it was helpful! CPU stuff is definitely tricky and a combination of things, but things like voice count and extended release can definitely make a quick difference (especially with multisampled instruments). The new CPU indicator is a great help
great upload....Personally, I'd like to see the coloured pads brighter (vs the ambient light) for this type of tutorial, (I have a hard time reading your 7 seg. display) but the info and overall presentation are excellent. Can't believe how archaic is seems to see this display, now that I'm so spoiled by the OLED version..........great info.....thanks v much........your videos are excellent, especially the sound, eq and mixing of your V.O. overtop.....unsurpassed!
Thanks. I can definitely see the value of the OLED display, but not enough to make me give up my beloved 7SEG. Ha. As for lighting, you've mentioned it on a few videos now. I personally like the balance here
Got some clicking on the performance mode whenever I use E.g. the stutter. Do you got that, too?
I just played around with a bit and didn't notice any clicking. I imagine with stutter it would depend on timing too, but I couldn't get it to overtly click
This is exactly what I was looking for with the new firmware, thanks Bay Mud!! Very excited to sit down with my Deluge and mess with these new features myself! =P
Hey thanks! Glad to hear it. So many more features I didn't have time (or expertise) for, so take a look at the docs if you're curious. So many more features on the way too!
Right. I need to find a way to have my deluge back. It was so stupid to sell it.
It's hard to tell what's around the corner. I can sympathize with unloading gear you're not inspired by at the time. Hopefully you can find you're way back if it suits you!
@@BayMud I actually had it alongside push3 standalone and chose that instead. It's a hugely fun bit of kit but i have live on my mac and should just leave it there really.
Oh that's interesting. I've heard good things, but don't do much on the computer, so I've avoided the Push line
@@BayMud I have been thru a lot of GAS and I honestly wish I'd just stayed with the mac for the heavy lifting and my deluge for the fun portable jamming.
It'll happen again I'm sure!
I know the feeling! GAS is always lurking
Wow man, there's some great stuff in there I was unaware of! Thanks for making this.
Thanks! Yeah, so many new features that I wanted to make sure I highlighted a few of the smaller ones that don't get as much attention as grid mode, etc. Hopefully more to come!
Great video man! Love watching your content ❤
Hey thanks! Your videos are always inspiring
had no idea there was a brightness default, my life has been improved lol thank you
stellar_aria did such a fantastic job with the rings verb port, didn't even think to adjust the HPF and dampening to focus the tone of it
iirc the flashing play button indicates something has been culled, but as you said we don't really notice it sometimes. If you have like 4 notes playing and you have 4 synth voices, then that'll be playing 16 total voices as the notes are releasing, so when you ask deluge to play a new note with the previous notes releasing, if play starts flashing it might have culled a couple of those voices and start playing 4 more so you'd have like 18 total voices playing and releasing
OMG when was save/load defaults added to performance view???
Ha. I figured starting with the brightness setting would be helpful to someone! Hard to keep up with the progress---I remember testing the ability to save/load multiple sets of performance view settings at one point too (and crossfading between them!), which was super fun, so hopefully that makes it back in.
CPU stuff is always tricky. I mostly just wanted to make it clear to people that just because the play button is blinking doesn't mean you'll hear anything "wrong". I love that we have an indicator to know when we're pushing the limits (and can also turn if off when it's yelling at me. Ha)
Videos like this help me so much, Thanks for taking the time to show your favourite features.
Thanks! Glad you found it helfpul
Very informative and concise! Thank you!
Thanks! Glad it was helpful
7 seg for life! Thanks for the video
Ha! I'm with you there (at least until the devs make me really want a screen. Ha)
Great demo thanks
Thanks! Glad you found it useful
Great vid!
Thanks!
Superb stuff 👍🏼
Thanks!