RAM 1500 Muffler for Factory Dual Exhaust - INSTALLATION - B2 Fabrications
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2024
- Order a direct bolt on RAM1500 muffler HERE amzn.to/2Ql4wJU
In this video we install and review the B2 Fabrications direct fit muffler for the RAM 1500 with factory dual exhaust. This is a bolt on kit with no welding necessary with several options from mild to wild noise levels and can have your truck sounding awesome in minutes in your driveway with some simple hand tools.
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
![[ 🔴LIVE ] Minecraft : Day1 ลุยโลกสี่เหลี่ยมกันนน](http://i.ytimg.com/vi/dt81BapyZLQ/mqdefault.jpg)
Order a direct bolt on RAM1500 muffler HERE amzn.to/2Ql4wJU
Man...got my first ram less than a month ago and I quickly became addicted to your content. The explanations, the camera angles, ease of listening.
Appreciate you
This video is awesome, my muffler came and was on in an hour after watching this. The little hints, like notching out or grinding off the little posts made the install super smooth. Thanks for the help.
Just installed my B2 Fab 18" a few minutes ago. Took a lot of "wiggling" for sure. Thanks of the video and the hook up on discount!
I enjoyed the video. I did this a few weeks ago on a 13 ram with 6000 miles and found it easier to just take a sawzall to the pipes that exit the muffler, and cut as close to the muffler as i could. Florida truck but the rear exit pipes wouldn't budge. Worked out good, I opted for the muffler delete from B2 fab.
Sounds good on a cold start and when you get on it, quiet in the cab when cruising.
I really like your videos as well. I have a 1500 tradesman with the single pipe exhaust and I did a muffler delete, replacing the muffler with a piece of straight pipe. The muffler shop bent the pipe slightly to make it fit better, added hangers for the mid section and welded the whole thing. I like the welded pipes because of no leaks and won't loosen up.
Thanks for motivating me to do it myself and taking the mystery out of it.
Thanks for all the videos you've posted. Makes moddin my ram much easier
Thanks for the support!! More vids on the way 🤘
Sounds really good man i totally ordered one Up after seeing your video.and i was totally calling about one the other day but they wanted 620$ plus tax in Canada.your's is the cheapest I come across thank you
Appreciate the video, just did mine, exact one. Thanks for the help.
Sounds great. I installed a Borla cat back s type on my 17 black express last week. Quick and easy. Love your videos!!
Nice!!! Thanks for the support on the channel! More on the way!
Thank you for the video. I just installed a magnaflow on my 17 Ram Sport and it went well thanks to watching this video 3 times. Took me about 90 mins. I had some rusty bolts. I love the sound.
I like the sound with just the short headers
Oh how I envy the salt free parts of the country.......
Haha It is nice not going to lie! 👍🤣
in the northeast the first tool out is the cutoff wheel....
Had to use the cut off wheel on mine today...and a can of PB Blaster
William Silverman I know how ya feel man! Had a flowmaster exhuast Rot off in two years 😭💔
Thanks man i used your boosted discount and i love my B2 fabrication 18" exhaust. Not too loud and perfect for CA laws. Also installed the S&B intake that gave it a nice growl. 🤘
Thats awesome Ralph glad to hear it worked for ya! 🤙🤙🤙
@@BoostedMotorsports whats the code?
Man I cant wait to get that exhaust for my ram 1500
I like it I have a 2012 ram 1500 and the exhaust is sick. I need more pop.
Thanks Rodney! I'll get some better sound clips. This gives it a nice tone without being too obnoxious and loud when cruising 👍
Someone put an Aero diesel muffler on my 2012 Ram before I bought it. It sounds great, but does have some drone, especially when the MDS kicks in, then it sounds like a diesel.
B2 Fabrications is still selling this exhaust kit, available with 18" muffler, 14" muffler and muffler delete. I just ordered the 14" version for my truck, its $290 for the two muffler versions or $210 for the muffler delete version.
When I installed my carven bolt on I had my tips stick out like that too. It does look nice but be careful when dropping the truck... the control arm bracket on the axle will hit the exhaust pipe on harsh bumps. Never punctured a hole but did see the contact is was making
Thanks for the info! I'll be adjusting this before I install my Belltech 2/4 😎👍
Sounds beefy bro!! Bet it sounds even better in person. Great video! 👍🏼
Yeah definitely! I'll get some better sound clips soon!
BoostedMotorsports awesome!
Lol on the "if you have friends"
I would have to Jack mine up, my age my gut will need the clearance...
I'll be putting my BBK shorty headers on this wknd , ordered from summit raceway, can't wait to crack open some more knuckles..😉
Nice!!! Yeah always good to have some extra hands for this job if you can lol. I have the shorty header install vid on here also on my channel if you haven't seen that one definitely check it out! Its a step by step video but yeah it isn't fun 😆
Ram trucks sound awesome.
Great video and thanks for posting it!
BTW Excellent sound.
Persi A. Thanks! This video doesn't do it justice! I'll get some better sound clips soon!
thanks for this video bro, the day I decided to do this in my driveway we had a tropical storm moving past florida so I had work in between down pours 😅 however my 2012 ram 1509 rt sounds like a beast now!!!
Sounds amazing!👍👍
Video doesn't do it justice! I'll get some better sound clips! 😁
I have a 2014 limited same color but 4+4. Would love a pro charger on mine. Can't wait to see how it works for you.
Thanks for the support! I can't wait either!!! 👍
Sounds great
I have the same muffler with adapters I made myself. It’s a great sounding muffler. It will get a little louder after a month or 2 but nothing crazy.
Yeah it's a pretty nice sound! Not too crazy but sounds mean
Love it. I have a 2014 Ram 1500 as well. I'm subscribed!
Thanks for the support Charlie! We've covered a ton of content on these trucks so make sure to check out the "ram maintenance", "ram mods" and "supercharger" playlists for these trucks on this channel 👍😎
Don't ever wanna damage your tips... Lol!! Great video. Subscribed.
Thanks Noel! Gotta protect the tip! 🤣
Careful with your tips fellas . Sounds good man .
Hahah always! 🤣
Love my dream truck since they put.hemi in em
👍👍👍
Nice video 2017 ram r/t I went with the sweet Thunder Exhaust tabs were already cut fit perfectly at stock weighs about 10 pounds lighter than yours it's a baffle resonator exhaust. Guaranteed not to have drone made in USA in Cadillac Michigan excellent product there's a TH-cam video on TH-cam of how it sounds will never have any other exhaust but that it's made like they did for the Z28 Camaros and Corvettes in the 60s and 70s makes the Hemi sound really beefy deep deep tone.😀
That's awesome! Can't go wrong with some good sound and weight savings! 🤘
@@BoostedMotorsports went with sweet thunder the company is out of Cadillac Michigan they have there resonators on eBay for the ram. Bought it on eBay for about $225.00 free shipping.
Good video. I'll be doing this on my 2015
As always. Great video! I wish i would have went with the 18". I went longer. Also had to add pipe and couplings.
Thanks for the support! Yeah the bolt on aspect makes it pretty nice and quick to swap for sure! 😎
You've come a long way from these days.
Great vids man. Helped me on the exhaust manifold bolts. Keep it up
Gotta grind the tabs and flush up those tips. That magnaflow sounds good and those welds are phenomenal!! I went with B2 fabrication as well.
Thats a project for another video 😁
I'm about to order this up. How do you like it? How is the DRONE at highway speeds?
12MotoDad notch the new mufflers
Sounds good!
Thanks!
Cant wait
Nice. Thanks man!!!!
Sounds good 👍🏼
Thanks Daniel!!!
Sounds awesome!
This video doesn't do justice Nick! Better sound clips are coming!
BoostedMotorsports can’t wait for those.
Sounds good👍
Thanks Mike!!!
Sounds good.
Thanks Kevin!
Man that sounds great I wouldn't mind picking one up.
I'll get some better sound clips soon! It sounds way better than it came out in this video! 😎
you are the man!
That truck is TOO clean! Do you go Mudding brah?!
Donesan707 what's mud? Lol
Great video bro
Thanks Tony! 👍
Wiggle wiggle wiggle! That sounds really nice! :)
A little jiggle and wiggle is all ya need for this job 😂
sounds great man keep going ^^
I'll get some better sound clips soon! 👍
BoostedMotorsports you should get camshaft 😎🔥 to wake up the neighborhood 😂😂😂
This awesome
Thanks! Let me know what you think of the other videos on the channel too when you get a chance! 👍🙂
BoostedMotorsports anytime man. I am about to start my ram series too!
I want to upgrade my 2016 ram 1500 express midnight edition but I watch a lot of Scotty Kilmer videos haha so I’m hesitant 😂😂😂😅 I might change my muffler tho
Great video
Great Video, good detailed instructions. great sound. but now im curious why when i did mine my tips lined up inline with the bumpers edge and didnt stick out? i didnt touch the locating pins or notch the pipe either? either why super easy install and great results.
Thanks!!! Maybe you got lucky? lol
im okay with it. 45min install and just a tiny tweak to match the tips height. sounds great. i uploaded a few phone vids too if you wanna check them out of the 14in
oh by the way your carven videos is what led me AWAY from that option so thank you!!
hey i just looked under my truck and mine is reversed from the way you put yours in. the straight section is on the lower clamp and the bend is higher/closer to driveshaft. not sure if that will help with the tips or not
Sounds amazing is it the 14” or 18” muffler?
I think I want to get my 2018 ported and polished...
That would be badass!! 🤘
Yay! 😊👏
🤘🤘🤘
No shit. I had a boesch built on my previous ram 1500. Was loud but I like the flowmaster outlaw alot better!
Awesome video as always brother. Are you gonna modify or replace the y pipe? Can't wait for the sound clips.
R S thanks man! Can't do much with that pipe here in CA unfortunately! They don't mess around over here lol
Loving the videos and made sure to subscribe after watching a couple of them. Only question I have is where to get the Magnaflow B2fabs direct replacement. Tried the link but it sends me to a total different exhaust.
Nice exhaust. I don’t like the tips sticking out personally.
Nice video ! 14 or 18 inch ?
Keep it up man. Which do you prefer though, soundwise, the cut out or this? Either way it sounds sick.
That's tough! I've gotten very picky with my exhausts and on my truck at least I enjoy the quiet stealth cruising and then the electronic cutout for when I wanna have some fun!
Yeah same here coz ive got a 2 yr old so i dont want it to be that loud. How is it inside though? I have a ram 1500 as well. Thanks
That is awsome! Ty, I can do this...
Hell yeah! 👍👍👍
Sounds great! What about any vibration during the acceleration? And is the sound too loud on the highway?
No vibration and its not annoying or loud on the highway which is one of my biggest pet peeves. I sold my Carven for that reason but this is much more quiet
Sounds really good. Did you ever get a discount code for us for this or the 14 inch kit?
Thanks! The discount code should work for any of their products but check out the other vid for the code 😎
Do the duel tip also have hangers?
Awesome video you might of mentioned in video but did you get 18” or 14” aggressive sound?
This is the 18" 👍
I just put the 14" on mine...not quite as loud as I thought it would be. Will probably end up cutting off the resonaters
please... get some serious exhaust tips like the carven one's got the same love the looks ill post to ur fb page
Is the new muffler strait through glass pack?
Would you recommend this or the electric cutout? Or both?
Did I just imagine that you said you might be working on getting us a discount code for them?
I was looking at the Flowmaster direct fit muffler for my 2010 ram 4 x 4
Norman gettys I got that for my 2014 Ram and it sounds great. It is the Flowmaster American Thunder direct fit. Plenty loud with my JBA shorty headers but not obnoxious on the highway
Norman gettys I have the flowmaster direct fit like b2 and sounds better
Any in cab drone at highway speeds?
Did you find there wasn't as much horsepower at first when you hit the gas pedal like on the highway after you put the muffler on?
why does this sound better than the B2 stright pipe?
Quick question.
Where’s your custom black wheels?
Persi A. I still have my bronze 24" hellcat wheels just been doing a ton of driving and need the extra economy right now. Once we get the beater Jetta finished that I've been working on in my other videos I can deck out the truck again and drive that Jetta around as my daily 😜
I have read on other sites that the gasket bbk supplies with the order of headers burns out after awhile, are you aware of this ?
Did you order different gaskets ?
Thanks for your vids
Need to hear the 14”
How come you didn't go with like a Flowmaster Super 10 or something because I had the exact same Muffler in my truck and I put this Flowmaster Super 10 and it was a lot nicer
Hey man, do you like this better then the carven that you had? I put the carven progressive on about a week ago. But it is a little louder then I want. Plus when the ECO mode kicks in it’s annoying.
Yeah that was the exact complaint I had with the Carven. The Carven sounded great but this is much more tame. Its pretty aggressive outside the truck but inside is much more tolerable.
How's that muffler performing?
Its been great! No issues!
BoostedMotorsports Would you suggest that muffler for use on long trips? We do a 1000 km trip every year down to the coast up here in Canada plus lots of day trips in our home province. So I'm concerned with the dreaded drone it gets to your head and your stomach. I would really appreciate hearing your opinion cause I've been following you for some time now and have come to trust your word. Thanks a lot my friend.
Huge fan of the build but those stock wheels are hidious. I like the other ones if they're for sale or something
Ben Roberts cmon what's wrong with the grandpa wheels it's stealth!!! Haha jk they are only on temporarily and for track. 24" hellcat wheels will be going back on in a couple weeks 🤘
Is there any drone at highway speeds and also on normal excelleration from a stop to say 60mph how intruding is the exhaust in the cab area?
Is there a drone to sound when engine goes into 4 cyl mode .?
Now that's it's in do you feel any more power?
Nah there's not really much to be gained from bolt on mufflers honestly. Even with my electric cutout open or closed at the drag strip with full flow it barely makes a difference
I’m doing res delete from them after I do my bolt on
Is this and old vid? I seen another video that had a carven exhaust. I think I did anyway.
This is a new vid. I tried the carven in that old video and was too loud 24/7 for my liking so now I'm rocking this bigger muffler with electric cutout when I want added baddassery 🤘
BoostedMotorsports Hell yeah. I thought I was tripping.
I am looking for a little sound and more performance will this help?
Still have the Carven I’ll buy them
Long gone sir! 😎
Why are you rolling on those stock 17" wheels? Did I miss the video where you explained it?
I've been driving the hell out of this thing as my daily and didn't wanna wear out my 24" rubber and also enjoying the better gas mileage. Once I get that Jetta running I'll retire the ram as my daily 🤘
wat if u dont change the headers would it sound like a deeper growl
Question: how many mpg did you lose after changing from stock to this one featured in the video? I took both my stock muffler and tailpips and lost about 2-3mpg for 5 months. At highest with my 1500 i got 18.7mpg with stock muffler and exaust
Link doesnt work
Looks like they stopped selling them. Here are a couple options of the same thing one cheaper and one more expensive. Let me know which one you go with 💪
amzn.to/38b2Mev
amzn.to/31m4nNo
You can't really worry about mpg when you got a truck. If you're worried about a few MOG you shoulda bought a Prius
How is the drone? I have a magnaflow 18" and it drives me nuts driving the interstate
How would you compare it to the Carven you had?
Carven sounds badass but is super loud. This is much more mellow and less drone. When I want more noise I just open the cutout 😎
Did u find any fuel saving by this install .
Does this affect mpg hp or Torque like a muffler delete?
Hey were any of the hangers welded on?
On the B2 the hangers come welded to the exhaust clamps that slip over the exit! 👍
I have a ram 1500 2016 slt of a single exhaust , how can I put the same as yours