How to Check and Clean PCV Valve on Suzuki F6A 660cc Engine

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024
  • Been more than a year since my 1994 Suzuki Every DE51V minivan has undergone massive engine overhaul. Since then everything went smooth and sailing until I saw heavy oil leaking under the timing belt cover and I suspect it sources from there. I just ignored it and another few months passed then I saw another oil leak! This time the oil leak is coming from the distributor oil seal! I was thinking why this is happening when every oil installed seal is brand new? Oil levels drop quickly just right after an oil change. After many sleepless nights researching on the web, I found out that this is due to PCV valve failure. Then comes this day to do an acquired knowledge to fix and to my surprise, the damn PCV valve was installed backwards! Finally made up my mind that there are no good auto mechanics here in the Philippines. Just hacks and crooks.
    Good news, after cleaning up the valve, it is still very functional and still good as new.
    Read more about PCV Valve maintenance on this link www.aa1car.com... titled "Positive Crankcase Ventilation (PCV)" by Larry Carley copyright 2019 AA1Car.com
    Also an excellent article from axleaddict.com "Bad PCV Valve Symptoms and How to Test the PCV Valve Yourself" by Dan Ferrell on this link axleaddict.com...
    SIGNS OF A BAD PCV VALVE
    You probably don't realize how important the PCV system-the Positive Crankcase Ventilation (PCV) valve and its related components-is to the well-being of your engine.
    A bad PCV valve or related component can produce a number of symptoms. For example, if the valve clogs, or gets stuck in the closed position, you'll notice one of these symptoms.
    SYMPTOMS OF A BAD PVC
    - Increase in internal engine pressure
    - Failure of one or more oil seals or gaskets
    - Engine oil leaks
    - Moisture and sludge buildup inside the engine
    - Engine surges and possibly black smoke
    - If the PCV valve gets stuck open, or a system hose gets disconnected or ruptured-producing a vacuum leak-you'll notice one or more of these symptoms.
    SYMPTOMS OF A STUCK PCV
    - Engine misfires at idle
    - Lean air-fuel mixture
    - Presence of engine oil in PCV valve or hose
    - Increased oil consumption
    - Hard engine start
    - Rough engine idle
    In addition, a PCV valve stuck open can trigger the "check engine" light due to increased air flow. And a diagnostic computer may erroneously blame this light on a mass air flow sensor or oxygen sensor instead, making it harder for you to detect the real source of the problem.

ความคิดเห็น • 84

  • @rameldelacruz6703
    @rameldelacruz6703 4 ปีที่แล้ว

    New subs bossing!!! Thanks sa tutorial. Malaki tulong sa mga gaya ko wala pang alam sa DIY.God bless!

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Thank you po.

  • @burn0580
    @burn0580 3 ปีที่แล้ว +1

    hipan nyo mga bro yung pcv valve dapat yung maluwag na hangin papunta sa carb, tapos yung pigil na hangin papunta naman sa top cover

  • @honeyreehal3971
    @honeyreehal3971 4 ปีที่แล้ว

    Brother ur genius

  • @nhelmercsdiy7521
    @nhelmercsdiy7521 4 ปีที่แล้ว

    Sir help po, ano po problema pag tumataas ang menor pag long drive n or pag mainit na ang mkina, di nmn ganun kataas ang menor pero not normal n iddle po..salamat

  • @elmerguevarra5771
    @elmerguevarra5771 3 ปีที่แล้ว +2

    boss pila na ka mekaniko niingon nga okay ra kuno ikondem ang pcv valve? ang akua cab kung naa pcv valve lain iya andar..kung aku hukson mutinong iya andar? unsa may himuon naq sir? watching from iloilo

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว +2

      Scientist to na mga siraniko. PCV valve importante na nig idle ug inig accelerate. Put back the pcv valve and tune your idle, also check your ignition timing.

    • @elmerguevarra5771
      @elmerguevarra5771 3 ปีที่แล้ว

      @@chrclmnky dili pwd condemn ang pcv valve?

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      @@elmerguevarra5771 dili

    • @elmerguevarra5771
      @elmerguevarra5771 3 ปีที่แล้ว

      @@chrclmnky mao ni ang problema ron kay bisan unsaon naq og adjust sa hangin og gas pangit kaayo og andar basta nkatakod ang pcv valve. hay kasakit ba sab sa ulo ani! tabang boss bi basig naa kay idea dha unsaon pag adjust kung naay pcv valve.

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว +1

      @@elmerguevarra5771 carb na? E set proper ignition timing. Sunod adjust sa fast idle, air fuel mixture, ug main idle screw. Hinanglan kag timing light ug vacuum gauge. E check pod resistance sa imo coil ug high tension cables basin failing na.

  • @AdmiralVanz
    @AdmiralVanz 4 ปีที่แล้ว +1

    Good day Boss. unsa may symptoms kung naay problema ng imong gitangal nga hose?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Maintenance ra ni para sure walay barado ang PCV valve.

  • @julymojica2651
    @julymojica2651 4 ปีที่แล้ว

    Ano po brand ng pcv valve na naka install diyan, and yung smaller pipe po sa intake correct tapos yung longer pipe ng pcv valve sa engine cover?

  • @joelmedrano9297
    @joelmedrano9297 3 ปีที่แล้ว

    Sir, magtatanong lang po sana kung pano malocate and pcv valve pag pickup type.

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Same location din po, sa ibabaw ng valve cover.

  • @ronvillanueva2939
    @ronvillanueva2939 5 ปีที่แล้ว

    Thank you sir. Can we use Wd40 instead?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Mas maayo paint thinner or carburetor cleaner sir kay murag oily man gud ang WD40.

  • @raptorcc6184
    @raptorcc6184 4 ปีที่แล้ว

    What is the name of the music at the beginning of the video?

  • @ashramashram1243
    @ashramashram1243 4 ปีที่แล้ว

    How do you fix hard starting and low compression in Suzuki carry Truck F6a engine.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Hello ashram, hard starting might be a bad fuel pump. Low compression might be vlave issues or worn piston rings.

  • @daveslife921
    @daveslife921 4 ปีที่แล้ว

    so where was the checking? i saw you spray it with carb. and choke cleaner.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      The check is to determine the flow direction and by blowing through to check if its still working. Cleaning it first will ease the job.

  • @melissacorbeta3007
    @melissacorbeta3007 3 ปีที่แล้ว

    Boss inig paandar nako okey man ang idle. inig padangan nako segunda okey pa ang dagan pero inig tresera na inig htamak nakog gasolinador magkiyodkiyod man ang dagan pero inig full throttle na mawala.Unsay sakit kaha ani boss salamat sa advice!

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Fuel pump ilis danan na.

  • @markgilsurio9500
    @markgilsurio9500 2 หลายเดือนก่อน

    boss ilang fuel consumption nya kilometer/liter?. at di po ba hirap hanapan ng pyesa?.

    • @chrclmnky
      @chrclmnky  2 หลายเดือนก่อน

      Average 12km/L

    • @markgilsurio9500
      @markgilsurio9500 2 หลายเดือนก่อน

      @@chrclmnky sa pyesa naman po boss di ba hirap maghanap?, plano ko po kasi kumuha ng ganyan sasakyan pang negosyo at pang pamilya na din po. malamig din ba boss yung aircon ng ganyan?

    • @chrclmnky
      @chrclmnky  2 หลายเดือนก่อน

      @@markgilsurio9500 i suggest getting brand new unit po sir. Para iwas sakit ulo.

  • @user-qx1js4ni3c
    @user-qx1js4ni3c 7 หลายเดือนก่อน

    Boss pwede magtanong pwede ba conversion f.i to carburator

    • @chrclmnky
      @chrclmnky  7 หลายเดือนก่อน

      Pwede naman po. Mas mahirap if carb to efi.

  • @astroboyamante8811
    @astroboyamante8811 6 หลายเดือนก่อน

    Pag po mahina ang reverse ng automatic na f6a engine ano po ang remedyo o gagawin?

    • @chrclmnky
      @chrclmnky  6 หลายเดือนก่อน

      Sorry sir i can't do automatic transmission.

  • @Edr1c
    @Edr1c 4 ปีที่แล้ว

    Thanks ani bboss lain pa ato naa kay vacuum hose diagram sa f6a engine bos?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Welcome sir. O naa ko diagram sa vacuum hoses. Ako nya ni e post diri puhon.

    • @dantemirafuentes741
      @dantemirafuentes741 4 ปีที่แล้ว

      Bos ano kaya problima sa ako multikab bos mata as masyado ang menor nya pA bago pero pag naka on po ang healight tsAKa ang eircon normal po ang minor nya gaya po sA iyo ang aking multicab sAlamat po sa sagot bos

  • @rhoderickradana6823
    @rhoderickradana6823 6 หลายเดือนก่อน

    Boss Ang Suzuki 6valve Wala bang PVC sa intake?

    • @chrclmnky
      @chrclmnky  6 หลายเดือนก่อน

      Meron din sir. Pang regulate sa crankcase ventilation

  • @loisekimberlymuega549
    @loisekimberlymuega549 3 ปีที่แล้ว +1

    pwede condem ang pcv?

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Di pwede. Mamumuo ang blowby sa crankcase ng engine ninyo. Laking problema yun.

  • @michaelcastro607
    @michaelcastro607 ปีที่แล้ว

    Boss paki video ng posisyon mo ng vacuume hose, yan kasi problema ng mini van ko,

    • @chrclmnky
      @chrclmnky  ปีที่แล้ว

      There are many diagrams and tutorials available on Suzuki Multicab Facebook groups. Also you can watch this video - th-cam.com/video/-497eJdq42M/w-d-xo.html

  • @user-vw8rj2vm8h
    @user-vw8rj2vm8h 2 หลายเดือนก่อน

    Ano pong maganda f5 o f6

    • @chrclmnky
      @chrclmnky  2 หลายเดือนก่อน

      Maganda naman po ang dalawa. Just different engine models.

  • @matthewcameron6860
    @matthewcameron6860 3 ปีที่แล้ว

    What year is this van?

  • @eljhaypascual9376
    @eljhaypascual9376 4 ปีที่แล้ว

    Ano po gmit nian sir saka paano po kung wala ung pcv valve

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      One way valve for engine blowby gases from crankcase back to intake manifold to save fuel.

  • @AdmiralVanz
    @AdmiralVanz 4 ปีที่แล้ว

    boss naka repost ka og diagram sa vacuum hoses tagai ko og link tnx. Naa man gud ni problema ako MC hardstart sa buntag, need pa nga i-hair blower ang distributor cap para muanadr dayon.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Naa unta ko diagram sa vacuum hoses pero wa pa nako na publish. Sendan nalang tika ug mga files. Message me on Facebook. Facebook link on About section of my channel.

    • @markrishyt3659
      @markrishyt3659 3 ปีที่แล้ว

      Ilisdi nalang na distributor cap boss. Basin nanay crack. Ga moist ilawm ana

  • @selvamselvamangai2731
    @selvamselvamangai2731 5 ปีที่แล้ว

    Nice

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thank you Selvam.

  • @emmanuelmendoza1694
    @emmanuelmendoza1694 2 ปีที่แล้ว

    Sir akoa multicab bago overhaul bago piston bago ring one click paandarin problema diinan mo acceleration mausok ng puti pinalit an ng bagong valve seal uli ganon padin kino dim ang hose na papuntang hydrauvac galing intake ganon padin puti parin ang usok sa tambutso kinompresstion test na 180psi ang makuha sa tulo ka cylinder. Pwedi patulong mga amigos. F6a makina salamat.

    • @tiburcio4020
      @tiburcio4020 11 หลายเดือนก่อน

      May tagas ang ung fluid mo na pupunta sa hydrovac pa check mo hydrovac mo

  • @fhardscanacand.9570
    @fhardscanacand.9570 4 ปีที่แล้ว

    boss asaan po makakabili nang ganyan? wala po kasing ganyan dito sa mga auto supply dito sa aamin

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      marami nyan dito sa mga shops samin. marami multicab surplus shops dito.

    • @fhardscanacand.9570
      @fhardscanacand.9570 4 ปีที่แล้ว

      @@chrclmnky i mean yung brandnew niyo po

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@fhardscanacand.9570 sa surplus shops din makakabili ng mga brand new parts. May marami ng auto supply dito samin. By the way san po location ninyo sir

    • @fhardscanacand.9570
      @fhardscanacand.9570 4 ปีที่แล้ว

      @@chrclmnky ganon ba. magkaano naman po ang price? mindanao po cotabato city po.

  • @GoogleUserPH
    @GoogleUserPH 4 ปีที่แล้ว

    Sir ano dahilan kapag mataas rev mausuk na

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Check cylinder compression. Check also fuel pump. As well as the high tension cables using multimeter. Check proper timing.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Might be the head gasket is leading coolant to the ignition chamber.

    • @GoogleUserPH
      @GoogleUserPH 4 ปีที่แล้ว

      BIlis maubus ng engine oil eh

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@GoogleUserPH nagka overheat yan sir? Malamang gead gasket dapat ma palitan. Mag leak yung oil and coolant kaya mausok.

    • @GoogleUserPH
      @GoogleUserPH 4 ปีที่แล้ว

      @@chrclmnky pero coolant di naman nag babawas

  • @eljhaypascual9376
    @eljhaypascual9376 4 ปีที่แล้ว

    Ano po gmit nian

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Check valve for blowby gases from crankcase and back to intake manifold.

  • @almarmagallanes3421
    @almarmagallanes3421 3 ปีที่แล้ว

    Di malaman pano tamang pag kabit..

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Watch the video again and again.

  • @TheMudDragon
    @TheMudDragon 4 ปีที่แล้ว

    Delete PCV valve