Suzuki Carry/Every/Scrum F6A Engine Rebuild

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ม.ค. 2025

ความคิดเห็น • 316

  • @nhelmercsdiy7521
    @nhelmercsdiy7521 4 ปีที่แล้ว

    Boss, pa help naman po..yung multicab ko po tumataas ang menor pag long drive or pag mainit na ang makina, di naman ganun kataas pero not normal po yung taas nya..s cold start po parang mamamamatay pag di mo binombq ng ilang saglit tas ok na..tas pag ng drive k ng mga say 20km mataas na ang menor nya po.. png deliver po nmin ng tubig at quarantine po kasi ngayon salamat

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +2

      Same thing nangyari sa mc ko sir. Simple lang yan.
      - check nyo resistance ng ignition coil. Dapat malakas pa. Kung mahina na palitan ng medyo malakas
      - check spark plugs. Dapat yung manufacturer's recommend model yung NGK DCPR7E copper plugs
      - check air/fuel mixture. Adjust nyo sa pinakamalakas na settings after normal temperature while plugging the distributor lines in doing so.
      - check resistance ng ignition cables ninyo. Dapat nass wastong resistance lang kundi palitan na ng bago.

    • @nhelmercsdiy7521
      @nhelmercsdiy7521 4 ปีที่แล้ว

      Thank you sir.. noted po.. God Bless..

    • @patriciocondez1908
      @patriciocondez1908 4 ปีที่แล้ว

      @@nhelmercsdiy7521 magkano overhull

  • @brwpe7733
    @brwpe7733 6 ปีที่แล้ว +3

    Great job. There's a lot of people afraid to to try what you just accomplished.

  • @herminigildojakosalem8664
    @herminigildojakosalem8664 2 ปีที่แล้ว

    Looks like it is a well done job. Congratulations. I wish I had your knowledge and skill to work on my F6A engine as good as you did on yours.

  • @jirasakhiran79
    @jirasakhiran79 5 ปีที่แล้ว +1

    I have a 1991 suzuki carry DB51T here in the US. I'd like to replace my carb with a remanufactured OEM one. Is that carb you have an aftermarket? If so, are they the Chinese aftermarket ones I see on Ebay, etc? Are they good quality and last long?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Hello Jason, yes they are Chinese made and very cheap. Easy to start engine even on cold morning. And economical on gas too.

    • @jcweiz09
      @jcweiz09 5 ปีที่แล้ว +1

      Don't buy chinese oem. Suzuki is Japan. It is better to have 2nd hand japan original than new chinese made parts for your engine.

  • @TheJonathandrumer
    @TheJonathandrumer 5 ปีที่แล้ว +1

    hello, this video is good thank you very much, ask this engine uses oxygen sensor!

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thanks for the feedback. I don't know if it still uses an oxygen sensor.

  • @Cr0zzAlpha
    @Cr0zzAlpha 4 ปีที่แล้ว +1

    Pag install po ba aircon comoressor,palitan din po ba ung belt? Or inaadjust lng?thanks.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Palitan po ng mahabang belt upang ma contain ang compressor pulley

    • @Cr0zzAlpha
      @Cr0zzAlpha 4 ปีที่แล้ว

      @@chrclmnky ok po,sana makahanap ako pang f5a...hehe salamat po sa info..👍

  • @adriandiw
    @adriandiw 6 ปีที่แล้ว +2

    Paano po ang brake in process na ginawa nyo pagkatapos? Yung sakin din kasi, kakatapos lang ng general overhaul. Palit piston ring, lahat gasket at machine shop ang liner na bago din. Salamat!

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Hello Adrian, thanks for the feedback. Normal use and city driving after overhaul. Taking notes of the gas milage and odometer readings. Change oil after 500kms, then after 700, then 1000kms. After that, drove a long distance trip. Gas milage improved from 8km per liter to 14km per liter unleaded.

    • @adriandiw
      @adriandiw 6 ปีที่แล้ว

      @@chrclmnky Okay sir, noted! Sana tumino na mga kei van natin. Hindi kasi biro ang gastos. Salamat ulit!

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      @@adriandiw You might want to check ignition coil and cables. That main part responsible for the engine running condition. Weak ignition coils will produce misfires.

  • @herminigildojakosalem8664
    @herminigildojakosalem8664 2 ปีที่แล้ว

    Sir Charcoal Monkey good AM. I know this vid is years old by now but I am hoping I can still get an answer from you. I've just had my F6A engine worked on kasi nag-overheat. Now I worry because I'm not sure if the mechanic installed the head gasket right. My question, Sir Charcoal Monkey is: Aside from the engine's sound is there any other indicator that will show if the head gasket is baliktad? I am not familiar kasi sa tamang tunog ng F6A so I cannot go by sound alone. Kung baliktad ang head gasket, walang langis na nakakarating sa loob ng head cover? Will my Low Oil Indicator bulb light up? Papaano po ba? BTW, kabibili ko lang (second hand) itong unit ko kaya newbie talaga pa ako dito. In anticipation of your reply, I thank you now. Here is hoping you get to notice this. God bless po and thank you again.

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว +1

      Hello po. If baliktad ang pagkaka install ng gasket, instantly may malaking damage ang mangyayari sa camshaft, rocker arms, and upper block kasi walang langis na dadaloy. Then may malakas na ingay, parang grinding noise. Pwede namang buksan ang valve cover then paandarin. Makikita agad na may langis or wala.

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว +1

      Overheating issue must be the water pump impeller na pudpud na.
      Or hindi na bleed ng tama ang cooling.
      Or mas mataas air to fuel mixture, lean. Or overly advanced timing yung distributor.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 2 ปีที่แล้ว

      @@chrclmnky - Big thanks for your prompt and very informative reply. "Pwede namang buksan ang valve cover then paandarin. Makikita agad na may langis or wala". I like this. It is exactly what I need. I hope my future questions (for they shall be many) would receive the same indulgence from you, Sir Charcoal Monkey. Big, big thanks again. Keep safe and God bless.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 2 ปีที่แล้ว

      @@chrclmnky - Yes, Sir. Thank you.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 2 ปีที่แล้ว

      @@chrclmnky- Thank you again. Learning a lot po from you. Thank you again, Sir Charcoal Monkey. Keep safe and God bless.

  • @armandosamillanojr.420
    @armandosamillanojr.420 5 ปีที่แล้ว +1

    boss pano ba pa tipidin sa gas,kasi yung multicab ko malakas kumain sa gas

  • @emmanuellecastro3876
    @emmanuellecastro3876 4 ปีที่แล้ว

    Hello sir. Sir may i ask po what is the difference between f6a engine and f10 in multi cab? Im planning to buy a fb type multi cab. So i want to know what is the bess among these 2? Thank you i hope you can answer my question

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      F6A = 3 cylinders
      F10A = 4 cylinders..
      By the way what is FB type?

    • @emmanuellecastro3876
      @emmanuellecastro3876 4 ปีที่แล้ว

      So sir ano po mas maganda sa 2? I mean when it comes sa performance at patipiran sa Gas?
      FB type po na multi cab(close van)

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      @@emmanuellecastro3876 Why is it called FB?

    • @emmanuellecastro3876
      @emmanuellecastro3876 4 ปีที่แล้ว

      Sa Pampanga sir usually FB type po twag. Prang L300 na pinaliit.

    • @emmanuellecastro3876
      @emmanuellecastro3876 4 ปีที่แล้ว

      Family and Business etc..

  • @ianbabor3971
    @ianbabor3971 2 ปีที่แล้ว

    Bos lht bh ng scrum cat eye ang radiator single tube lng? Pwed po bh or nty nyu n pong palitan ng double tube? Slamat bosing

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว

      One outlet and one return. The other is jus for heater purposes. You can plug it if not in use.

  • @STEVEYDRAWS
    @STEVEYDRAWS 4 ปีที่แล้ว

    whats the ticking sound? can it be removed?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Camshaft timing must jumped off a tooth. It happened to me.

  • @bennsantiago3748
    @bennsantiago3748 4 ปีที่แล้ว

    Magandang araw sir. Saan ba dapat magbaklas sa minivan cateye kapag gusto i-repair ang wiper link/motor? Una e binaklas ko dashboard hindi pala makikita o maabot ng kamay doon sa ilalim. Loose yata linkage o kung anuman dahil hindi na pantay ang hawi ng wipers saka maalog cya. Thank you po.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Sorry sir di ko pa nasubukang baklasin ang dashboard area.

    • @bennsantiago3748
      @bennsantiago3748 4 ปีที่แล้ว +1

      @@chrclmnky salamat ng marami. Gusto ko sana subukan e baka bigo na naman tulad noong una ☺.

  • @cypanconrad8973
    @cypanconrad8973 2 ปีที่แล้ว +1

    Sa diin shop nyu master?

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว

      Balay ra sir diri Butuan

  • @rhylianrealista5924
    @rhylianrealista5924 3 ปีที่แล้ว

    boss unsay symptoms na need na e overhaul?

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      If worn out na mga piston rings. If more than 200,000km na needed na new cylinder sleeves.

  • @Rafel24ajj
    @Rafel24ajj 5 ปีที่แล้ว

    boss pwede DIY ang mag.change sa water pump or mag.ilis lang sa gasket? TIA

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Pwede ra man sir pero medyo hago ra ba mag tanggal ug water pump. Ug naa ka time ug kauban mo bungkag sa makina, makaya ra ninyo. Pero lingaw man pod.

  • @patrickdaledelossantos7272
    @patrickdaledelossantos7272 3 ปีที่แล้ว

    sir patulong naman po kailangan pa bo ba sukatin ang piston clearance sa bore bago po ang bore sleeve(standard ang size) tas piston ring standard din ang size . accurate na po ba yun pag pareho std

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      If standard bore, use standard piston and rings.

  • @edanygonia6425
    @edanygonia6425 6 ปีที่แล้ว

    maayong buntag sir, newbie question mga pila ka adlaw mahuman mag overhaul butang ta walay mga ilisanan? multicab gehapon. salamat

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Good morning, depende sa mekaniko ug unsa ka skilled. Naay 5 days ra naa pod abtan duha ka semana. Kini naa sa video newbie pa ni nga mekaniko.

  • @seidrickraymalinao3898
    @seidrickraymalinao3898 5 ปีที่แล้ว

    Good eve sir, usually pila gastos mag overhaul anang suzuki carry? Salamat

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Good evening pod sir. Diri sa butuan ang charge usually sa top overhaul is 4800 labor only. Full overhaul is 6500 labor only.

  • @elizabethgecalebenigno4663
    @elizabethgecalebenigno4663 4 ปีที่แล้ว

    di nyo na binaba yung transmission sir?mahirap ba tanggalin ang engine kung rear van type ang mc?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Total overhauled po to sir. Baba lahat. Pero dapat top overhaul lang sana ginawa ko. Really nothing to do with the crankshaft area.

  • @johnamancio9103
    @johnamancio9103 3 ปีที่แล้ว

    Itatanong ko lang po sa tungkol sa multicab namin Kasi tumatagas na ang coolant sa gawing likod ng crankshaft pulley Niya, ano po ba magandang gawin don, ano din po ba posibling sira Niya, salamat po.

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Palit head gasket po sir. Top overhaul po.

  • @Borromeodura
    @Borromeodura 5 ปีที่แล้ว

    unsaon pag tangtang sa bolt nga gitauran or gihawiran sa timing built nga deli ma daut nga built kanang deli siya maputol, unsay mga pamaage kay mag-ilis unta ko oilseal sa gitauran sa built dapit sa head, maau unta naa moy video nga tinagsa gikan sa pagtangtang giunsa hangtod sa pagtaud sa makina ug sa pag timing sa built ,, salamat

  • @MrPeta-dx8lo
    @MrPeta-dx8lo 5 ปีที่แล้ว +1

    Ser, saan po kayo grumaduate may NC I at II din po kayo?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Hello Peter, no I didn't undergo any mechanical training. So no diploma or certification for me or something. 😄

    • @MrPeta-dx8lo
      @MrPeta-dx8lo 5 ปีที่แล้ว

      @@chrclmnky mechaniko po ba kayo? graduate kasi ako ng TESDA ng Automotive NC II ..

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      @@MrPeta-dx8lo im not a mechanic but can fix things no problem.

    • @MrPeta-dx8lo
      @MrPeta-dx8lo 5 ปีที่แล้ว

      @@chrclmnky taga saan po kayo? Hanap kasi ako ng work kahit helper lang....

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +2

      @@MrPeta-dx8lo Butuan City Agusan del Norte

  • @coydog7902
    @coydog7902 5 ปีที่แล้ว

    What’s the difference between an F6 and a V6?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Sorry I don't know

  • @nelseaurelio5694
    @nelseaurelio5694 5 ปีที่แล้ว

    Sir tanong lang po mayroon bang gasket sa may engine filter yong humahawak sa engine filter ibig kung sabihin

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Oil filter? May built in gasket na pag bumili ka.

  • @punx.l6449
    @punx.l6449 3 ปีที่แล้ว

    Boss ilang inch ang bore ng f6a?

  • @sheila091581
    @sheila091581 5 ปีที่แล้ว

    Good pm sir. Ask ko lang po presyo talaga ng surplus na carburetor ng f6a? Salamat po sasagot.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Hello Sheila, surplus carburetors cost between 4-6 thousand pesos. I have tried using the Chinese version they performed well and good.

  • @PamVergara-ok3rb
    @PamVergara-ok3rb 11 หลายเดือนก่อน

    ilan weeks po bago ma recon?

    • @chrclmnky
      @chrclmnky  11 หลายเดือนก่อน

      Depends

  • @lilyaldrin920
    @lilyaldrin920 5 ปีที่แล้ว

    Anu clearance valve NG intake at exhaust 123 po ba ung firing order?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Hello Lily, sorry nakalimutan ko valve clearances. And sequence is 132.

  • @diwisely2187
    @diwisely2187 4 ปีที่แล้ว

    Normal ba na maging ganyan Ang tunod after NG overhauling, Kasi sakin after ovehaul naging ganyan, tapos taas pa kunsumo sa oil, unlike dun sa kaibigan ko, nagpaoverhaul Ganda NG tunog NG engine nya, kahit cold start Ganda andar.

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Hindi sir. Nag back job kami sa makina dahil baligtad ang head gasket. Eto na andar matapos mag back job. Pakinggan sa video sa link na to sir th-cam.com/video/geK1GS4rQkI/w-d-xo.html

    • @diwisely2187
      @diwisely2187 4 ปีที่แล้ว

      @@chrclmnky panu maicheck na baliktad head gasket? Giclean ko Rin Ang pcv valve at ecv same pa Rin.

    • @diwisely2187
      @diwisely2187 4 ปีที่แล้ว

      Egr pala

  • @rickyheruela8878
    @rickyheruela8878 4 ปีที่แล้ว

    Pwede pa overhall parehas ani nga makina suzuki scrum f6A,pila budget?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Depende sa lugar ug sa mechanic.

  • @pisshiegne7185
    @pisshiegne7185 5 ปีที่แล้ว

    laina lagi nag andar chief -naa pay problema ?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Yes sir wa pa ni na tune-up pag first andar ani.

  • @brylledaone7872
    @brylledaone7872 4 ปีที่แล้ว

    Boss ilang oras po Ang aabotin sa pag assemble nang makina sa f6a

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      At least 8 hours po

  • @eljhaypascual9376
    @eljhaypascual9376 4 ปีที่แล้ว

    Hello po sir...ano po sign pag cra na crankshaft ng f6a engine

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Crankshaft - you will hear knocking and pinging engine noise coming from below.

  • @gadurukinar6260
    @gadurukinar6260 4 ปีที่แล้ว

    Sir ano pinag kaiba sa makina ng f6a srum and f6a ordinary engine? Sana po masagot nyo ako

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      F6A engine = pareho lang lahat yan. Magkaiba man ang transmission and engine placement, pareho lang talaga lahat yan.

    • @gadurukinar6260
      @gadurukinar6260 4 ปีที่แล้ว +1

      Thanksyou sir :)

  • @chrisrojo5877
    @chrisrojo5877 5 ปีที่แล้ว

    Sir unsay gamit nimo oil ug filter pag change oil? Salamat.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      C-631 oil filter boss, then ang oil 20w-40 or 20w-50. Mas nindot daw if 15w40 SF/CF kay mas gaan.

  • @justforsmile2386
    @justforsmile2386 2 ปีที่แล้ว

    idol tanung lang po yung f5a po ba pwede po ba lagay sa minivan?

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว

      Pwede kung kasya transmission block

    • @justforsmile2386
      @justforsmile2386 2 ปีที่แล้ว

      yung nga po tinatanong ko eh kung kasya or kung anu anu ang need e modified

  • @MariaJoyleeAraujo
    @MariaJoyleeAraujo 5 ปีที่แล้ว

    Sir if ilisanan ug crankshaft ang multicab pla kaha magasto tanan

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Barato ra man crankshaft sir. Labor and small parts ka madak an. Mahal pod mga gasket.

  • @al-lancabaruan724
    @al-lancabaruan724 4 ปีที่แล้ว

    Boss saan ba mahahanap ung sensor ng water temp sa makina boss? Salamat po ng marami

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Sir marami dito surplus shops ssmin dito sa Butuan City

  • @HappyAnimeMe1190
    @HappyAnimeMe1190 5 ปีที่แล้ว

    Sir unsay gamit nimu pang limpyo? Unsa na nga spray gun?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Compressed air ra man gamit sir then gasoline ge mix sa diesel para pang limpyo.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @xXpowerzoneXx gaming 50 50 ra sir. Pwede pod pure gasoline pero hang kaayos mata. 😂

  • @alphonseiiicruz4788
    @alphonseiiicruz4788 5 ปีที่แล้ว

    Sir ask lang kung pila ang gauge sa valve clearance sa multicab

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Nakalimot na man ko sir. Ako nya basahon balik then ako e update diri.

  • @vser100
    @vser100 5 ปีที่แล้ว

    Mga sir ano mo kya ang sira kpg nagsama ang tubig at langis sa radiator pero un engine oil wala tubig. Ano po kya sira nun... Carry multicab.. Po slmt po sa magreply

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Good day po sir. Malamang may leak na po yung head gasket ng MC ninyo kaya nagkaganon. Top overhaul and tune up po lunas dyan.

  • @gi4689
    @gi4689 4 ปีที่แล้ว

    Boss, may kano bayad sa pa overhaul sa makina sa f6a suzuki?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Wala pong kano sir pinoy po lahat.

  • @PlayMates_
    @PlayMates_ 5 ปีที่แล้ว

    Pila kahay magasto kong i overhaul ang makina boss? 12v f6a suzuki scrum

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Diri sa amo naas mga 7k ang labor sir.

    • @prettyyu2716
      @prettyyu2716 4 ปีที่แล้ว

      Dito sa amin 3K ang labor general cleaning. Pag may damage sa crank shaft palitan mo nang surplus kasi genuine made in japan. Price nang crank shaft now is 6T to 8T. Labor is separate from the price of spare parts.

  • @alphonseiiicruz4788
    @alphonseiiicruz4788 5 ปีที่แล้ว

    Sir ask lang po pwede po ba ibalik ang thermostat sa multicab same unit po tayo nag multicab sir

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Yes sir pwede naman but I suggest to remove it. And make your radiator fan auto-sensing.

    • @alphonseiiicruz4788
      @alphonseiiicruz4788 5 ปีที่แล้ว

      Aw okay sir salamat daan

    • @alphonseiiicruz4788
      @alphonseiiicruz4788 5 ปีที่แล้ว

      Ngano man sir mo overheat ang multicab kung naay thermostat

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@alphonseiiicruz4788 Basin depektoso nga thermostat sir. Advisable e remove nalang sir.

    • @alphonseiiicruz4788
      @alphonseiiicruz4788 5 ปีที่แล้ว

      Aw okay sir salamat sa info sir

  • @oliverlucio764
    @oliverlucio764 5 ปีที่แล้ว

    Sir alway running po ba talaga ang fan ng MC? TIA.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +2

      Nirekta kasi mga rad fan pag dating dito satin para safe sa overheat. Pwede mo lagyan ng switch o di kaya temp sensor switch fan ng MC ninyo. Sakin manual yung fan, nilagyan ko ng switch. E on ko nalang pag nag 10 oclock na ang temp gauge. Babalik naman to zero, then off na naman.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 2 ปีที่แล้ว

      @@chrclmnky - Ingenious! I like this. I will do it too on my minivan.

  • @johnpaulbustillo3792
    @johnpaulbustillo3792 5 ปีที่แล้ว

    sir anong magandang langis sa multicab naten?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Any engine oil with API rating SF, SG, SJ, SK, and SL

    • @johnpaulbustillo3792
      @johnpaulbustillo3792 5 ปีที่แล้ว

      sir i mean ung viscosity po ba un? sample 10w40 po?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@johnpaulbustillo3792 any will do. Marami na akong nakitang mga arguments tungkol nito on Facebook groups. But for me I prefer to use the thicker lubrication of 20w50 here in our very hot climate.

    • @johnpaulbustillo3792
      @johnpaulbustillo3792 5 ปีที่แล้ว

      maraming salamat sir lastly sir san pobg part ng makina naka pwesto ang timing belt naten?

  • @reymondgonzales9500
    @reymondgonzales9500 6 ปีที่แล้ว

    Boss pila di sukod sa valve clearance sa intec ug exhaust sa scrum nga multicab?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Nakalimot ra ba ko sir. E search and download lang palihug ang PDF sa Suzuki F6A 660C engine. Naa tanan didto mga data.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Nara ang PDF sa Suzuki F6A 660C Engine - www.manualslib.com/manual/1207219/Suzuki-F6a.html
      E download lang, naa tanan diha data imo kinahanglan.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Sa imo particular pangutana, mao ni nga page, about valve lash clearance on intake and exhaust. www.manualslib.com/manual/1207219/Suzuki-F6a.html?page=89&term=valve+clearance&selected=7

  • @Elzed649
    @Elzed649 4 ปีที่แล้ว

    Idol magkano mag pa over hual multicab engine?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Dito samin mga 7k labor

  • @valerroljavier5289
    @valerroljavier5289 5 ปีที่แล้ว

    Sir pwede mangutana nganong cgeg ka overflow akong carb nya iyang breather ga usok na

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Completo pa ba mga vacuum hoses ana sir? Basin ge pang tanggal na mga vacuum hoses ana. Then kung mag overflow ang carb, most likely ge abrihan or ge helabtan na ang carb.
      Mag usok na breather/filter, basin blown na ang cylinder head gasket ana.

  • @ryanvitug7499
    @ryanvitug7499 4 ปีที่แล้ว

    Mga boss ask ko lang magkano inaabot ng pagpapaoverhaul ng f6 engine?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      mga 12k sir.

  • @joshuasaludar7705
    @joshuasaludar7705 3 ปีที่แล้ว

    Boss leaking po crankcase namin boss ano po maganda gawin dito boss para mawala

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Trace nyo lang po kung saan galing yung leak. May video ako na nag leak yung camshaft seal. - th-cam.com/video/O0hHH7XbVYo/w-d-xo.html

    • @joshuasaludar7705
      @joshuasaludar7705 3 ปีที่แล้ว

      @@chrclmnky Tiningnan ko Boss eh dun kasi ng galing sa crankcase boss sa may bolt

  • @arielcunado7321
    @arielcunado7321 4 ปีที่แล้ว

    ano gamit mong carb sir? parang bago ah

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Bumili ako ng bago sir, pero ininstall ko ang original. Mas magaling pa din ang auto choke function ng original carb.

    • @arielcunado7321
      @arielcunado7321 4 ปีที่แล้ว

      @@chrclmnky ayoz lang ba yung brandnew carb compare sa surplus?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@arielcunado7321 Di pa ba nasagot sir?

  • @Mr.BusDriver
    @Mr.BusDriver 6 ปีที่แล้ว

    Boss picturebe sa pulley pag taod sa timing belt

  • @IcarusBartolata
    @IcarusBartolata 5 ปีที่แล้ว

    Good Day boss, Unsyt rason kaha ani dali ra gka basa akong sparkplug? Dili na daun mo andar...

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Weak na ang ignition coil sir. Pareho ra pod na nahitabo sa ako MC. Ge ilisdan nako ug maayo na coil wa na jud nag basa ang plugs.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Read more on this link how to check ignition coils www.aa1car.com/library/ignition_coils.htm

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Kinahanglan ka mahibaw unsaon pag tester ug coils aron nig pili nimo sa surplusan ma pili nimo ang maayo kay di tanan maayo ila baligya.

  • @sawajiri100
    @sawajiri100 3 ปีที่แล้ว

    Spray direct with Super Rust CalawaNg

  • @tupok718
    @tupok718 5 ปีที่แล้ว

    boss may ganyan din me automatic nga lang ask ko lang kung pano pa babain ung temp kalahati kc lampas pa nga.nung nabili ko cya 1/2 ung temp tapos binilhan ko ng bago radiator tumaas pa

    • @gideonpineda8613
      @gideonpineda8613 4 ปีที่แล้ว

      Thermostat lang yan

    • @prettyyu2716
      @prettyyu2716 4 ปีที่แล้ว

      Tingnan mo yong hose nang radiator connecting to your engine baka may butas or nagcrack na. Replace mo nang bago.

  • @raquellacarion4743
    @raquellacarion4743 5 ปีที่แล้ว

    Bos asa inyong shop naa mo dri Cebu Kay naa koy ipaayo nga multicab way kusug ang makina bos.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Naa ko Mindanao, Agusan del Norte.

    • @farjanmamao4083
      @farjanmamao4083 5 ปีที่แล้ว

      @@chrclmnky pila budget magpaayo sa enyu pariha anang enyu giayo

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@farjanmamao4083 Average overhaul fee diri sa area namo naa sa 6,000-7,000 pesos.

  • @matthewryanpampolina1836
    @matthewryanpampolina1836 5 ปีที่แล้ว

    Sir magkano kaya ang computer box? bibili po kase ako multicab na 2nd hand pero yun daw issue, sira daw yon pero gagana daw kapag pinalitan. Salamat po ng madami sa tulong.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      I'm sorry no idea about the price of the ECM engine control module or computer box.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      What I can suggest is to purchase surplus vehicles from reputable sellers. There are many expert vehicle mods on facebook pages and also sells very good vehicles.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 2 ปีที่แล้ว

      @@chrclmnky May ECM po pala F6A?

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว +1

      @@herminigildojakosalem8664 efi f6a meron ecm. Carbed, no.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 2 ปีที่แล้ว

      @@chrclmnky -Again another valuable info from you. Thank you. God bless you and your loved ones.

  • @rmbxcul
    @rmbxcul 6 ปีที่แล้ว +1

    boss himo og tutorial about sa multicab nindot lagi daghan kag folowers...

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +2

      Helli Xcu, dili jud ko expert sa multicab sir, nag kahigayon lang na nag overhaul ako nalang ge document. Salamat sa pag bisita. 😊

  • @adrielsangre857
    @adrielsangre857 4 ปีที่แล้ว

    Boss magkanu po pababa ng tranny muticab f6 automatic fi

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Sorry sir no idea.

    • @adrielsangre857
      @adrielsangre857 4 ปีที่แล้ว

      Ndi po bakyo nagawa sir. Xnxa na po sa tanong

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@adrielsangre857 Di po sir. Pang manual lang na carburetor Suzuki F6A kaya gawin. Di po kaya automatic transmission and EFI.

  • @STEVEYDRAWS
    @STEVEYDRAWS 4 ปีที่แล้ว

    ilang kilometro po sa isang litro?

  • @alexford1074
    @alexford1074 4 ปีที่แล้ว

    Sir pa help naman po sa problem ng multi cab ko laging ma carbon ng itim ang spark plug kahit bago tas after ng mga ilang days may isa o dalawa napopudi sa sa mga spark plug. ok naman po mga timing ng makina bago po mga high tension wire at diatributor cup sana matulongan nyo ako salamat

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Check nyo po ignition coil sir baka mahina na. Use multimeter in testing your coil. Also you might want to replace fuel filters, there are 2, at the fuel send and at the fuel return. Re check your high tension wire for its accepted resistance values. Commonly nasa electrical lang talaga yan.

    • @alexford1074
      @alexford1074 4 ปีที่แล้ว

      Salamat sir check ko po lahat yan sana maging ok na un na nga cguro ignition coil at mga fuel filter kasi ala din siya lakas hirap na hirap sa akyatan

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      @@alexford1074 check my latest video as well. About fuel pump and filters th-cam.com/video/m6CesuqxuLQ/w-d-xo.html

    • @alexford1074
      @alexford1074 4 ปีที่แล้ว

      Primary coil 1.4 ohms. secondary coil 28.18 k ohms yan po reading ng ignition coil sir. palitin naba ang ignition coil ng mc ko sir

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +2

      @@alexford1074 palitan na yan sir. Dapat below 13k ohms lang 2nd coil. Magdala po kayo ng multimeter kung bibili ng surplus sir. Piliim nyo mas mababang resistance, tyak malakas ang power nun

  • @deotugaoen1
    @deotugaoen1 6 ปีที่แล้ว

    Sir magkano ang nagastos mo parang need ko rin mag pa overhaul.ty

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      5500 labor (Butuan City rate)
      6500 parts (overhauling kit, piston rings, bearings, gaskets, cleaners, etc..)
      3000 extra expenses

    • @deotugaoen1
      @deotugaoen1 6 ปีที่แล้ว

      ty sir

  • @samplacido137
    @samplacido137 5 ปีที่แล้ว

    boss alam nyu fuel consumption ng multicab?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Average is 12-14 km/L boss.

    • @samplacido137
      @samplacido137 5 ปีที่แล้ว

      @@chrclmnky salamat boss, alin ba maganda? scrum or carry? plan ko kasi bumili.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@samplacido137 scrum is actually just a term used by Filipinos for the Suzuki Every minivans having a model number that starts with DE, ex DE51V. If you like to get a new vehicle I suggest to buy a brand new one to save yourself from headaches out of these surplus vehicles.

  • @sandeepsingh-ij8yl
    @sandeepsingh-ij8yl 4 ปีที่แล้ว

    Muje ko koi super carry diesel engine k sabhi parts ki list with price bata skta ha , I need urgent

    • @DriverSushant
      @DriverSushant 4 ปีที่แล้ว

      Boodmo app download kro usme sb pata chal jayega

    • @sandeepsingh-ij8yl
      @sandeepsingh-ij8yl 4 ปีที่แล้ว

      @@DriverSushant meni Kara per sahi price nai aa rahe ha

    • @DriverSushant
      @DriverSushant 4 ปีที่แล้ว

      Kis part ka sahi price chahiye

    • @sandeepsingh-ij8yl
      @sandeepsingh-ij8yl 4 ปีที่แล้ว

      @@DriverSushant pure engine parts k

    • @DriverSushant
      @DriverSushant 4 ปีที่แล้ว

      Bhai sahi price hai usme
      Aap mano ya na mano
      Mai wahise order krta hu

  • @jachuy234
    @jachuy234 5 ปีที่แล้ว

    Sir patulong po . na tambay po kasi yung multicab namin ng 3 weeks tas ngayon na ggagamitin sana hindi umandar. nung maayo pa sya . pag yung susi naka ON umiikot yung radiator fan sa harapan tas ngayon wala na . at may tumutonog na parang spark sa makina nya. patulong po please

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      3 weeks stambay? You have to remove and have the battery recharged to a nearby battery center or repair shops. All battery juices were drained during the long non-usage.

    • @jachuy234
      @jachuy234 5 ปีที่แล้ว

      salamat po sir. pero bat ganun sir kahit di gina gamit nag didischarge. ano po salution jan?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@jachuy234 Disconnect negative terminal on battery if you are going to standby your vehicle for more than 3 days to prevent power draining.

    • @jachuy234
      @jachuy234 5 ปีที่แล้ว

      wala parin sir. kakakuha ko lang ng battery . wala parin kuryente yung multicab . wala yung ilaw parang wala syang battery kahit meron

    • @jachuy234
      @jachuy234 5 ปีที่แล้ว

      @@chrclmnky Boss. lahat po ba ng Suzuki Scrum may built in na Fuel Pump? o kaylangan mo pa bilhin ? napaka hirap po kasi pag na ubusan ka ng gasolina tas mag isa ka lang ang hirap pa andarin wala kasing nag lalagay ng gas sa carborador .

  • @macoythegreat
    @macoythegreat 6 ปีที่แล้ว

    pila palit nmu sa carb boss? sinaw man gud kaayo :D

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      chinese made ni nga carb sir. 4300 ako palit.

  • @perfectsinner8311
    @perfectsinner8311 6 ปีที่แล้ว +2

    Ngutana lang ko... akong multicab nga scrum kay mag over heat. Init siya ug makina. Dili normal ang iyang kainit. Ako na siyang gipa overhaul. Ilisan na nako siya ug connecting wire sa sparkplug ug cylinder head gasket. Ako nang gipaover haul ang rediator. Gipableedingan pa jud nako ang waterpump. Pero init pa gihapon ang iyang hinongaw sa makina. Ma feel nimo sa sulod labi na ug magdagan. Unsa kahay problema ani no? Advice lang be?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Good evening Sir, pila ang temp reading sa dashboard? if naa ra sa 12 o clock position or less, normal ra na sir. Then ang hinungaw nga init physically sa makina normal ra pud.

    • @perfectsinner8311
      @perfectsinner8311 6 ปีที่แล้ว

      CHRCLMNKY mao ba... ngutana lang pod ko. Unsay maayo nga brand sa sparkplug para sa multicab 12 valve?

    • @perfectsinner8311
      @perfectsinner8311 6 ปีที่แล้ว

      CHRCLMNKY naa gyod sa 12 0 clock ang temp. Ok ra diay na nga temp niya. Ok salamat kaayo sa imong rply bossing ha.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +2

      Ang nindot na spark plug para multicab is NGK DCPR7EGP (Platinum) tag 250 ang isa.
      Naay mas nindot, mas fuel efficient, low voltage needed, less fouling, NGK DCPR7EIX ( Iridium) pero mahal. Tag 600 each. Pero sulit kaau. Mas mo tipid ang fuel consumption and mas kusog ang kabig sa makina. Upgrade ko if maka tigom. Platinum ako gamit karon.

    • @perfectsinner8311
      @perfectsinner8311 6 ปีที่แล้ว

      CHRCLMNKY ok salamat bossing

  • @johnpaulgoloran472
    @johnpaulgoloran472 4 ปีที่แล้ว

    location nimo boss? need nako now..

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Butuan City sir

    • @johnpaulgoloran472
      @johnpaulgoloran472 4 ปีที่แล้ว

      @@chrclmnky ayay taga butuan pud ko boss, taga golden ribbon ko, south montilla blvd atbang freemethodist church...pero dia ko cebu ron..

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@johnpaulgoloran472 ayos.

    • @johnpaulgoloran472
      @johnpaulgoloran472 4 ปีที่แล้ว

      @@chrclmnky naa man gud trouble sa akong multivan scrum, kanang in between sa left og right sign signal ni siga nya kalit lang dili na mu andar bisag ako na gipalitan og spark plug

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@johnpaulgoloran472 kuha ug multimeter, test the high tension wires and ignition coil.

  • @animesenseinakama6474
    @animesenseinakama6474 4 ปีที่แล้ว

    boss maka daog bani og aircon boss?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      O naa man aircon ni sir sa original. Naka attach pa ang compressor ibabaw sa makina nig taod.

    • @animesenseinakama6474
      @animesenseinakama6474 4 ปีที่แล้ว

      @@chrclmnky salamat boss last question boss maka daog bana if butangan nako power steering boss. plano kc nako mag ilis makina sa akoa multicab

  • @nanzkielayson1919
    @nanzkielayson1919 5 ปีที่แล้ว

    Boss asa inyung shop??

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Wala ko'y shop sir. Nia ra kos balay. Kini na video nag pa tabang ra kog mekaniko kay di madag ako ra isa. :)

  • @solaimanbaimanot4180
    @solaimanbaimanot4180 4 ปีที่แล้ว

    saan pala locesion mo boss

  • @jaysonilagan5753
    @jaysonilagan5753 3 ปีที่แล้ว

    Sir saan location nyo

  • @cragemmerich9611
    @cragemmerich9611 5 ปีที่แล้ว

    please i need someone to teach me all parts of Suzuki mini bus both the names and pictures

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Hey Crag, let me know what you need.

    • @SenpaiJoyBoy
      @SenpaiJoyBoy 5 ปีที่แล้ว

      Go to the school and study

  • @winhadjiri634
    @winhadjiri634 6 ปีที่แล้ว

    Good day boss, magtanong lang ako pano po ba tatanggalin yung pulley sa taas? kasi po pag inaryahan ko sumasama yung crankshaft.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Sorry sir no idea, yung mekaniko ang gumawa. But I think mayron yang lock type tool na available to lock the gear.

  • @TheJonathandrumer
    @TheJonathandrumer 5 ปีที่แล้ว

    I have a suzuki jimny ja11 that comes with the f6A engine, and I'm spending a lot of gas, the engine has an oxygen sensor!

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      There are many factors when it comes to fuel economy on the F6A. First, you may want to check the ignition coil. It might be weak and not giving enough spark. May foul the firing.

    • @TheJonathandrumer
      @TheJonathandrumer 5 ปีที่แล้ว

      thanks for respond, but my engine dont use ignition coil because it use spark plug cable.

  • @reynaldogalvez787
    @reynaldogalvez787 5 ปีที่แล้ว

    Mrning boss.. Unsa my problema ani ako every nga gi overhaul alisdan ug head tas human na tanan unya pagpaandar dli mn mo vacuum ang intake tas individually check sa system gikan intkae manifold open tas testing sa head wla ghapon maong utro npud ang ako mekanik pag open tanan pati gasket alilis ug bag o tas nabuo na cya unya g start mao lng ghapon dli ka boto pra andar.. Redondo ra taman.. Matic ni cya nga K6A.. Salamat daan sa imo idea boss😊

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      - Basin weak na ang ignition coil ana. E check gamit multimeter. If taas na ang resistance, weak nana imo ignition coil.
      - Nag compression test ba mo? Dapat naay compression tester imo mekaniko.
      - Basin wala sa saktong timing ang makina. Dapat naa pod timing light ang mekaniko para ma adjust sa saktong timing.
      - K6A engine diba EFI na? Basin wala na sa saktong function ang computer box ana sir.
      Medyo kuti ayohon ang mga EFI kaysa carb engines. Dapat advance na pod imo mekaniko dili lang kato scientist ang agi.

  • @captainbotbot2151
    @captainbotbot2151 5 ปีที่แล้ว

    Pila kaha ni ka kilo y labot transmission. Ug pila ka hp ni nga engine. Anybody

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Suzuki F6A - 657 cc (40.1 cu in) 65 mm × 66 mm (2.56 in × 2.60 in). A four-cylinder version (the F6B) was also developed.
      Max.power (Net): 60 HP (44 kW) at 6000 rpm

    • @captainbotbot2151
      @captainbotbot2151 5 ปีที่แล้ว

      @@chrclmnky thank u sir. Sa imu estimate sir paghuman nimu assemble ma aswat xa isa ka tawo? Kaabot kaha xag 50 kilos?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@captainbotbot2151 Di madag isa ka tao sir oi. Kung naa mo chain block mas maayo para dali ra trabaho. Kung wala, kinahanglan at least 3 ka tao mo alsa nig taud balik.

    • @captainbotbot2151
      @captainbotbot2151 5 ปีที่แล้ว

      @@chrclmnky ah ic. Nangita man gud ko unsa makinaha mai power to weight ratio nga 1:1. So mga 100kg kaha ni makinaha? Y labot transmission ha

  • @linuxboy007
    @linuxboy007 4 ปีที่แล้ว

    Boss ano po ang dahilan bakit nasisira ang flywheel ring gear?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Sorry sir di pa ko naka experience ng ganung problema kaya di ko pa alam. Pasensya na.

  • @johnhenryquilinguin2409
    @johnhenryquilinguin2409 5 ปีที่แล้ว

    Pila siguro kung e overhaul ang landy nga van boss.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Ang overhaul labor diri naa sa 6-7k pesos diri sa Butuan sir. Small to medium petrol vehicle. Pero di ko sure sa kana nga vehicle sir. Nag pa overhaul ra pod ko ani.

    • @falabsgetoffecial5065
      @falabsgetoffecial5065 4 ปีที่แล้ว

      Pela pangayu pa overhole sir

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@falabsgetoffecial5065 mga ingon ana

  • @solaimanbaimanot4180
    @solaimanbaimanot4180 4 ปีที่แล้ว

    boss pahilf lang po kas susuki transfromer ko ayaw mag istart boss

  • @NotSoCrazyNinja
    @NotSoCrazyNinja 5 ปีที่แล้ว

    Something is not right with the finished rebuild. The engine is not supposed to sound like that.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +2

      Yes sir, the engine blows. The rebuilding was actually done twice because head gasket was installed in reverse. Didn't had a video recording of the 2nd engine test. So my bad. :(

    • @keithcitizen4855
      @keithcitizen4855 5 ปีที่แล้ว +1

      Interesting pick up, a capable fellow no doubt about that.

  • @boracay12
    @boracay12 6 ปีที่แล้ว

    That tiny engine to power the van , :( , just to small , a 1.3 would be great .

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +2

      Hello Paul, actually the tiny engine so powerful. They use these Suzuki F6A's for public transport that could carry 12 people.

    • @boracay12
      @boracay12 6 ปีที่แล้ว +1

      @@chrclmnky the newer ones are better ? my brother inlaw had a van , it could not even keep its speed going up a hill on the national road out of cebu . He sold it finally . We looked at newer vans , he didnt trust them and recommended agsinst them , we bought a low milage honda city , local made , with a 1.3 hood on gas and plenty of power , but i like the style of the van , custom 4wd . Da64
      , just that little engine ;(
      .

    • @jcweiz09
      @jcweiz09 5 ปีที่แล้ว

      it's a powerful gasoline engine. In Japan it is used as a transporter of goods in the field to the market w/c can load up to 350Kg but here in Philippines it is loaded like more than what it's max kg and they add thicker leaf suspension. Here are some modified body you can view → th-cam.com/video/KkrTgOammgU/w-d-xo.html :)

  • @johnpaulgoloran472
    @johnpaulgoloran472 4 ปีที่แล้ว

    location nimo boss....asap.

  • @abelnunez8188
    @abelnunez8188 6 ปีที่แล้ว

    Tahimik wlang lagatak boss ah....

    • @jcweiz09
      @jcweiz09 5 ปีที่แล้ว

      most gasoline engine hindi naman gaano lumalagatak. Diesel lang ang malagatak ang tunog

  • @imranamil1423
    @imranamil1423 6 ปีที่แล้ว

    Akong multicab pag ka human na overhaul..dili na kusug mudagan pag ka change gear sa tersira patay ang makina..unsa cgro ang problema didtu ok man ang timing pero wala man ang iyan kusug mo dagan.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Brother Imran, salamat sa pag tan-aw. Pareho ra ta ug problema after overhaul. It turns out guba na ang ignition coil. Ako ge ilisdan na ok na dayon. Ang spark plugs ako ge upgrade to NGK platinum.

    • @imranamil1423
      @imranamil1423 6 ปีที่แล้ว

      @@chrclmnky mao ba bro..cgoro akoa pud guba da cgro ang ignition coil..pa check nlang nako sa mechanic..3 days from now ra to nkagawas akoang multicab..hay problema na pud imbes na mo condition naluya man.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      @@imranamil1423 ilisdi pud ang mga ignition cables. naa man baligya set ana. Pwede ra ikaw mo tan-aw sa ignition coil. Sayon ra kaayo mag test ug naa ka multimeter. Dali ra man tang-tangon. Mao ni full tutorial on how to check ignition coils. www.aa1car.com/library/ignition_coils.htm

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Mao na kasagaran problema sakyanan ang electrical. Gamay ra mechanic na kahibalo mo test ug auto electrical labi na sa ignition na part.

    • @imranamil1423
      @imranamil1423 6 ปีที่แล้ว

      @@chrclmnky pila ang price sa set bro...mao jud bro gamay kaayo kabalu sa multicab..lisud man pud ang multicab..salamat bro ha akong tan awun ang tutorial..

  • @imranciycle7293
    @imranciycle7293 5 ปีที่แล้ว

    Engine number

  • @marcocarrington914
    @marcocarrington914 6 ปีที่แล้ว

    1 1600 Suzuki pick up

  • @dzcgewaadg571
    @dzcgewaadg571 2 ปีที่แล้ว

    Whataap umber

  • @liwatabanao6764
    @liwatabanao6764 5 ปีที่แล้ว

    Brand new carburetor malakas sa gusulina yan.. suki mo gasulihan nyan..

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Ok lang naman. Average of 12-14 km/L of unleaded gasoline consumed.

  • @arielcunado7321
    @arielcunado7321 4 ปีที่แล้ว

    ano gamit mong carb sir? parang bago ah