I let a small leak ruin the driver side floor on my 2000 Chevrolet Silverado. Come with as I go through the process of replacing it. #diy #repair #rust #silverado #chevrolet
I'm dealing with the same thing on an 04 Sierra. Found 4 leaks so far...rear window, cab vent, weather stripping, and parking brake grommet. Your welded floor pan came out better than mine. I used 3M panel adhesive which gave a solid connection, but is visually sloppier.
My leak was the wire harness boot coming out of the cab to go to the driver side door. Same was going on for the passenger side. Both are fixed now but I haven't put the carpet back in just to be sure until I drive it in a hard rain. Hope you get all your leaks fixed
I'm dealing with the same thing on an 04 Sierra. Found 4 leaks so far...rear window, cab vent, weather stripping, and parking brake grommet. Your welded floor pan came out better than mine. I used 3M panel adhesive which gave a solid connection, but is visually sloppier.
My leak was the wire harness boot coming out of the cab to go to the driver side door. Same was going on for the passenger side. Both are fixed now but I haven't put the carpet back in just to be sure until I drive it in a hard rain. Hope you get all your leaks fixed
That’s nothing compared to my truck I don’t even have to cut anything out I can just put the patch in and weld it in