@cycledrag I was at the texas sandrags in irving texas in 80 maybe 81. I went with a buddy who was dragging his. Champion framed flat track bike. I was doing wheelies on a fire road, That the announcer could see me doing these wheelies. He asked me to do a Demo on the track. It would be cool if you could find footage of it. I am on a street legal trikd out XT 500. Words can't do it justice, If you find it you will be amazed, I had problems at the line, But I did it light to light. Edit; There were lots of cameras there.
Dan's Turbo Busa (with Holley HP) was my first ever methanol tune (TEN years ago) and most of the original tune was done Remotely as well (from Florida). I did drive out to the Gilbert track/race one year though and Dan, Jeff and their entire families, crew(s) are all great people 👍 SO many bad ass 2-smokes but Dan's trike was the first non-nitro trike to break into the 2s (years ago)...
Wow what a awesome night I had watching the races they are awesome to watch thanks for a wonderful time.kind regards Gregory Lee from Melbourne Victoria Australia 🇦🇺 😀 👍
I raced R/C 2WD buggies in the late 80s and early 90s and we raced on the same surface. It's a mix of sand and dirt and clay and it's called loam. I won a shit load of races and little trophies too.
The top fuel trike is amazing. Any time a racer tries something different I am usually interested. I remember Don Garlits was always showing up with something new and was usually predicting "Everyone will be doing this in 6 months". And he was usually right.@@cycledrag
Jack I've been around Drag Racing most of my 50 yrs of life and Late Model Dirt Track Racing also but I will say this type of Drag Racing on Dirt with quads is bad ass and I would like to see more of it, if it's something you are considering streaming
@@cycledrag I'm a Honda Fan and I have a 94 Honda 300EX that I bought New and I have a 1987 Honda 250R ATV... I also like The Yamaha Banshee 4 Wheelers from back in The older Days and The Fuel ( Nitromethane) Machine was my favorite on This Video!! 🔥🔥🔥🤘🏻🤘🏻🤘🏻
His staples looked like mine. In 1987 I bought a brandnew honda 200 trx 4 stroke first yr. for 4wheelers. In 2 months the clutch was slipping so I put a Barnett clutch in it like he had. After that a supertrapp pipe I was jumping hills and broke the tib and fib in my rite leg the bone tore the kneecap off. They had to put 9 bone screws and wire the kneecap on. Ater 20 yrs roofing in southeast fla. had to have it repaired. Dr. Courtney in boca raton fl. did a great job if you need knee replacement done.
@@cycledrag i like the 2cycle ones the best the reason i like them the best is because i made a small 2 cycle weedeater motor that would operate on compressed air wouldnt run long since i didnt have a big enough air tank and i havent tried cutting weeds with it yet but it did run though no exhaust and without a carburetor too
Hell yes id give it a go . I had a panhead once that was dialed in so well, when i dumped the clutch, i slipped my hair ! Now im a 65 year old chrome dome .
Them top fuel 2 stroke bikes are insane. Billet aluminum S&S v-twin with inlet ports on BDC and all valves as exhausts. I msute tgevEPA wants it all 4 turd stroke!
Being paralyzed from the belt down from a motorcycle crash, I built a trike and ended up doing a few more track days, gave it up when life got in the way, if they would be crazy enough to put me on it I would most certainly give it a shot..
I would ride that! I used to work on Chris Boulet’s mud car! I love it! Outside of Mansfield,LA use to have mud drags check it out if they still have them!
I love my 2-smokes but couldn't see that banshee triple beating an 800HP Busa. Very surprised how close they were to be honest. I want to know how much power that Banshee was making
We had a 338 yamaha with fuel injection provided by yamaha for our snowmobile, and it ran away from the carb. Version. Would like to see what this 2 stroke would do with it ! Carbs were 36mm, injection was 44mm !
Damn... I had NO idea 💡 this Event existed... This is something WE need to bring out to California... I'll need to talk with the Operators at the Family Track... Perris Raceway 1205 Burton Rd. Perris, CA 92570
When I was younger we used to call a two-stroke a hooker had to have his hair and every weekend and those banshees really suck you get about 8 hour run time before you have to rebuild the top in about 90 to 100 on the rods thrust washers before they explode and come out the bottom
That's so bad ass people from so far that's wild I wished there was 1 close by me !! U have got to have big money to drive that far time off and everything !! Hell yea brother!!
@@jeffmonteith3055 how was I being a know it all by saying he talks too much? There doesn’t need to be all the extra commentary. He posts these videos to receive comments and criticism. It wasn’t rude. It was honesty.
Part of his production is talking a lot if you follow any of his videos. You're just a rude, entitled man. I can tell. If I told you you were fat and ugly, it is also constructive criticism, and an opinion no different than the one that you stated. Sorry, I don't usually get into these rants or really care, but there's just something about the way that you said that that reminds me of my 15-year-old child sitting at home with his video games
Go Jeff get out there work hard and prove the docs wrong. I would love to give it a go work my way up from the slower bikes to start with get the hang of it 😅😅😅
@@cycledrag Honestly the Herbie Quad was my favorite took a screenshot of it sent to my mum and now I have a project to do hear in oz over the summer I gotta make one of the Nieces or Nephews quads look like that hahaha minus the power and speed of course lol
Get your facts Straight .. Banshee Didn't make a Triple Cylinder Engine Dude!?!.. Most likely the Banshee has either a 3 cylinder snowmobile engine block, or a block out of a SeA-Doo watercraft.
Thanks for covering this event. Looks like a real blast. Please keep us updated with more coverage of this wild drag action 👍.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
If you like this stuff check out Gravelrama in Cincinnati, Oh.
Gotta love your enthusiam that you have at any drag bike event you cover....
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Hell yessssss I want more of this racing!!!❤🙏🏻🔥🔥🔥🔥🔥💪🏼
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
I grew up racing dirt bikes on the other side of the creek it's good to see Jeff 2.0 out there!!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@cycledrag I was at the texas sandrags in irving texas in 80 maybe 81.
I went with a buddy who was dragging his.
Champion framed flat track bike.
I was doing wheelies on a fire road, That the announcer could see me doing these wheelies.
He asked me to do a Demo on the track.
It would be cool if you could find footage of it.
I am on a street legal trikd out XT 500.
Words can't do it justice, If you find it you will be amazed, I had problems at the line, But I did it light to light.
Edit; There were lots of cameras there.
800 hp motorcycle? Wtf? That is legit! 🤘
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
A Top-fuel Harley produces 1500h.p.+
1500 HP
Dan's Turbo Busa (with Holley HP) was my first ever methanol tune (TEN years ago) and most of the original tune was done Remotely as well (from Florida).
I did drive out to the Gilbert track/race one year though and Dan, Jeff and their entire families, crew(s) are all great people 👍
SO many bad ass 2-smokes but Dan's trike was the first non-nitro trike to break into the 2s (years ago)...
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
That is the wildest thing I’ve ever seen, I gotta find a track near me. Thanks Jack for the video
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag I really liked them all but I’m a nitro guy at heart
Wow it actually lifted the front and had to back off but just a split second . Awsome .
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Pretty cool story jack, I had a 1984 rm125 too man...I think I was 13 or 14 too!!!
That triplecylinder banshee was awesome...
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
GREAT JOB JACK!!!!!!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Thats wild and cool. Funny how they prep the track and i guess you dont have to worry about a oil down. 😂
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Wow what a awesome night I had watching the races they are awesome to watch thanks for a wonderful time.kind regards Gregory Lee from Melbourne Victoria Australia 🇦🇺 😀 👍
I raced R/C 2WD buggies in the late 80s and early 90s and we raced on the same surface. It's a mix of sand and dirt and clay and it's called loam. I won a shit load of races and little trophies too.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
allan millyard makes 6 cyl kawasakie 2 stroke - cut and weld - have a look !
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
What a crazy event looks like so much fun with good people ..👍🏻🇦🇺
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledragthat Banshee Triple sounded off tap..👍🏻🇦🇺
🍻🇦🇺💨
Great fun. Thanks for bringing this to us.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
The top fuel trike is amazing. Any time a racer tries something different I am usually interested. I remember Don Garlits was always showing up with something new and was usually predicting "Everyone will be doing this in 6 months". And he was usually right.@@cycledrag
JEFF GUILLOT'S bike is terrifying 😂😂😂 respect to him 🤜🏻🤛🏻
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag the busa although the Banshee is a different type of crazy
Jack I've been around Drag Racing most of my 50 yrs of life and Late Model Dirt Track Racing also but I will say this type of Drag Racing on Dirt with quads is bad ass and I would like to see more of it, if it's something you are considering streaming
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag I'm a Honda Fan and I have a 94 Honda 300EX that I bought New and I have a 1987 Honda 250R ATV... I also like The Yamaha Banshee 4 Wheelers from back in The older Days and The Fuel ( Nitromethane) Machine was my favorite on This Video!! 🔥🔥🔥🤘🏻🤘🏻🤘🏻
That looks like a hell of a good time!!! Yes, I would do it, twist the throttle till the wheels come off!!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
😆 I bet you wouldn't...
I love drag races, but this dirt racing is awesome! 😊
Cycle drag is everywhere. I need a sticker!!
Witam wszystkich serdecznie życzę miłego dnia Tobie oraz wszystkim którzy kochają motocykle Dzięki za to że Jesteście ❤
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
His staples looked like mine. In 1987 I bought a brandnew honda 200 trx 4 stroke first yr. for 4wheelers. In 2 months the clutch was slipping so I put a Barnett clutch in it like he had. After that a supertrapp pipe I was jumping hills and broke the tib and fib in my rite leg the bone tore the kneecap off. They had to put 9 bone screws and wire the kneecap on. Ater 20 yrs roofing in southeast fla. had to have it repaired. Dr. Courtney in boca raton fl. did a great job if you need knee replacement done.
I can't imagine the adrenaline rush of laying down head first and hitting the go button an a machine like that🤘🇺🇸
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Id like to see them on a regular drag strip as is motor unmodified on slicks
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag i like the 2cycle ones the best the reason i like them the best is because i made a small 2 cycle weedeater motor that would operate on compressed air wouldnt run long since i didnt have a big enough air tank and i havent tried cutting weeds with it yet but it did run though no exhaust and without a carburetor too
@@cycledragare you auto responding 🤔. Kind of impersonal way to address your audience.
Damn, I wanted to see the three cylinder so-called banshee run not the turbo Bussa
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Hell yes id give it a go . I had a panhead once that was dialed in so well, when i dumped the clutch, i slipped my hair ! Now im a 65 year old chrome dome .
I would love to ride that Jack. Thanks for the upload.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Them top fuel 2 stroke bikes are insane. Billet aluminum S&S v-twin with inlet ports on BDC and all valves as exhausts. I msute tgevEPA wants it all 4 turd stroke!
Being paralyzed from the belt down from a motorcycle crash, I built a trike and ended up doing a few more track days, gave it up when life got in the way, if they would be crazy enough to put me on it I would most certainly give it a shot..
This looks like a blast 👌
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Cycle drag rules the Galaxy!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Definitely the 2 Stroker that raced that Hayabusa just because 2 strokers rule!!@@cycledrag
Great coverage of a cool event.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Wild Thing of course.
Thanks Jack for the show #2 👍👍's up
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Pretty much all of the dirt machines who knew this looks like so much fun
Love the sand drags
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag the 3 wheelers are cool. Bring on some racing lawnmowers
Love it Bring back some more.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
My dad used to race one like this but it was in the mid 80’s in Arizona.
I love how he is talking about dirt in every crack and crevice and then he turns the camera to a woman LoL I love it
One Word.. INSANE
Ya cool it’s great competition fun to watch keep going i may have to come to an event!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag Nitro Bike because they are unique!! and cars are heavy and clumsy!
I would ride that! I used to work on Chris Boulet’s mud car! I love it!
Outside of Mansfield,LA use to have mud drags check it out if they still have them!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
my mentor owned the TopFuel sand dragger records a few times. ... Amos is sorely missed
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Nice to see something different, pretty cool.
That was great stuff!
I’ve seen Wild Thing go 2.70’s at 130 mph + before Jeff’s crash into the water at over 160 mph!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
I love my 2-smokes but couldn't see that banshee triple beating an 800HP Busa. Very surprised how close they were to be honest. I want to know how much power that Banshee was making
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
The weight of a Banshee is SIGNIFICANTLY less than a Busa
@@davelowets I'm fully aware of that. 800HP is a lot to make up for the weight disadvantage the Busa has though.
I was there that nite glad he's back I was crew for Lucas sand dragster
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Super cool Jack!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
I enjoyed this keep it up dude
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
I would definitely do this!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
New driver, “which side is the clutch?”
Great show!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
When we say we would try it, it doesn't mean we would go wot anytime soon, that would take a "few" runs to work up to it..
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
No burnout needed😂
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Bonjour super vidéo merci
Im totally down for a rip on any of them!!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
We had a 338 yamaha with fuel injection provided by yamaha for our snowmobile, and it ran away from the carb. Version. Would like to see what this 2 stroke would do with it ! Carbs were 36mm, injection was 44mm !
Sick Machine.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag 3 wheeled dirt machine. Looks and sounds like a crazy ride
This is amazing! Holy shit ! I want tons of car drag racing. This isy first time watching this , its wild !
Yes Jack More of this So KOOL
It was so cool to watch
How much power does that triple banshee make. Is it na. For it to compete with a 800 hp turbo Janus’s motor.
Damn... I had NO idea 💡 this Event existed...
This is something WE need to bring out to California...
I'll need to talk with the Operators at the Family Track...
Perris Raceway
1205 Burton Rd.
Perris, CA 92570
Check out the tracks in Lake Elsinore, CA and Avenal, CA. Bikes and cars race at both facilities.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
HELL WITH FUSING MY WRIST!!!
THEY OFFERED ME THE SAME AND I SAID HELL NO!!!
...oh, hey Jeff ❤❤ hello, I'm nine and I have a question
Why is your forehead looking like an accordion?? 😂
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
What time did the 3 cylinder banshee run
18:50 👀
Which time? He ran twice. What was your favorite machine in here and why? Thanks so much for watching and subscribing!
When I was younger we used to call a two-stroke a hooker had to have his hair and every weekend and those banshees really suck you get about 8 hour run time before you have to rebuild the top in about 90 to 100 on the rods thrust washers before they explode and come out the bottom
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
That's so bad ass people from so far that's wild I wished there was 1 close by me !! U have got to have big money to drive that far time off and everything !! Hell yea brother!!
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Wow nice 👍
What went wrong?? Love when that nitro kicks in
Great stuff
I loved them all it just different and I like it. I own a trike A Tri glide.
For the road.
At what point does a motorcycle become not a motorcycle 🤔?😄
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
With that many entries I’m surprised he doesn’t make two more lanes
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Great Drag Race
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
That's really so cool and awesome because you really need to be crazy to ride one of those bikes or tricks but
Такой техники я еще не видел 😳
Мото мотор и нагнетатель на нитрометане это 🤯
👍👍👍👍👍
20 years ago, I would have crawled on it! 😅
This is awesome but you talk too much
That wasn't very nice dude. This guy works his ass off for these videos he puts together, for know-it-all couch potatoes to watch
@@jeffmonteith3055 how was I being a know it all by saying he talks too much? There doesn’t need to be all the extra commentary. He posts these videos to receive comments and criticism. It wasn’t rude. It was honesty.
Part of his production is talking a lot if you follow any of his videos. You're just a rude, entitled man. I can tell. If I told you you were fat and ugly, it is also constructive criticism, and an opinion no different than the one that you stated. Sorry, I don't usually get into these rants or really care, but there's just something about the way that you said that that reminds me of my 15-year-old child sitting at home with his video games
Yea
Agreed
Thats as fast as a Snow Outlaw sled, 166 in 500ft.
Pretty neat stuff.... Didn't know it existed
My first bike had training wheels too 😂
I am 53 so I definitely remember Herbie
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Very cool.😊
They're not very menacing on gas it's not until that nitromethane is introduced into those cylinders
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag I'm going to have to say wild thing 2.0 , anytime somebody comes back from something not severe kudos to them .
Id ride a nitro trike. Seems like a whole lot of dirt for just no good reason though lol.
Am I the only one that realizes these aren't motorcycles? A stretched out 3 wheeler is not a motorcycle but they are cool
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Amazing 😊
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
I'd give it a shot
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
WELL DONE
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Dome vally dragstrip is comparable as far as diamond in the dirt track. Its in yuma az
Awesome
Hell yea, I'd try it.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Go Jeff get out there work hard and prove the docs wrong. I would love to give it a go work my way up from the slower bikes to start with get the hang of it 😅😅😅
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
@@cycledrag Honestly the Herbie Quad was my favorite took a screenshot of it sent to my mum and now I have a project to do hear in oz over the summer I gotta make one of the Nieces or Nephews quads look like that hahaha minus the power and speed of course lol
If I had the money I would love to do that I wouldn't be the first to volunteer
Get your facts Straight .. Banshee Didn't make a Triple Cylinder Engine Dude!?!.. Most likely the Banshee has either a 3 cylinder snowmobile engine block, or a block out of a SeA-Doo watercraft.
What was your favorite machine in here and why? Thanks so much for watching and subscribing!
Cool vid!
Id do it would be a rush, i do high rise window cleaniing so that would get the blood pumpin for me.
Wild Thang 2.0 what a ride I won't to ride it he'll yeah what a ride
I could build a track like that on my little piece of land...
Only...
There wouldn't be a whole lot of parking...
[HOP HOP HOP!]