Looks good, but you haven't really shown connections. How many light strips/ light modules can go onto each controller? Lets say I wanted to run down the centre console. How many units, in total, can I connect to the main controller?
Hello, have you had any problems since your installation? because I did it without any problem for 1 year then nothing more overnight. I first blamed the main box then after a direct test on the battery it works. I took the energy from the same place as you after testing with a multimeter I got 6 or 7 volts. I checked the fuses too and need to check the EMF box now. I bought a new kit and plan to take the power to the main box on the hazard lights.
Could you tell me exactly how you wired you main controller and sub controllers. What wire colors do I need to connect the red to and the black to. I have a 2015 435i f33 convertible. Do I need to disconnect my battery before I tried to connect these? I didn't actually see you do any wiring in the video , you mentioned how you did it but I'm still a little confused. Thanks and great video you are giving my the confidence to try and do this!
What ever colour wire you pick to tap into out of the white with blue strips or white with orange strip has to match on all controllers so red wire from controller to white with blue strip and black wire from controller to brown. I didn’t disconnect my battery, how ever I did go into idrive and turn off ambient lights and I switched my auto lights to off positions.
I've had some experience with these and had a lot of trouble getting them to stay, even with double stick tape. I noticed at 23:12 your door strip was falling. I'm wondering what your solution was, because I'm thinking about jumping in again with a fresh kit, and i don't want the same fights I had last time.
@@MREVREN Which 3m double stick tape would you recommend, I saw there are several. Also, what would you suggest to use as a shim/spacer? I love the looks of these but they are an unbelievable pain at times, depending on the shape you're working with.
Hi dear, i have the same setup, everything was ok unless i downloaded the app and now i am repenting, have you encountred an issue where the big strips are only glowing half, first i thought the strip might be damaged so i connected the other one but the same, do you know where to fiddle in the app??? And do you know how to reset defaults?
It’s probably a software issue. There was a software problem with mine that I showed and discussed in this video linked below m.th-cam.com/video/m8WQDzdfBaA/w-d-xo.html
Anyone else havig issues using the "mic" feature on the app? When I try to use that feature, my aftermarket subwoofer stops working, but the subwoofer works with all the other features on the app.
Hi, with this kit can you set the door pockets to say blue at 100% brightness and have the dash stripss to say red at 50% brightness all at the same time, if you could reply asap that would be appreciated as i need to order asap as im going away in the car in 2w, thank you.
@MREVREN awesome. just ordered. i installed one the other day. looks mint but its all one colour at a time. strips i want low but door pockets hi. thanks very much for the speedy reply. ill be fitting one to my brothers m3 comp soon too. 🫡
all you had to say was thanks lol, you internet dudes odd as hell 😂 Highly doubt him or anyone reading your comment cares about you installing the same for your “bros m3” 😂😂 Come on now dawg
How do you stop that tacky RGB test sequence at the beginning. Looks terrible doing that at the beginning every time you start the car, which is a shame as it will never look OEM doing that.
I have a f30 320d efficient dynamics i tapped into my standard ambient lighting and it stays on for 5 seconds then goes off dose this 5 time them i lose all my ambient lighting till i turn my car off and on and dose it again. Any ideas on this ?? (Black to brown red to red and white
Credit on the installation. I considered this for a moment and then realised the prestige just dropped off the car. Each to their own, I suppose.
More RGB = More FPS, I mean... more HPs 😆
Lgbt lights. I mean RGB lights 😂
Looks good, but you haven't really shown connections. How many light strips/ light modules can go onto each controller? Lets say I wanted to run down the centre console. How many units, in total, can I connect to the main controller?
Hello, have you had any problems since your installation?
because I did it without any problem for 1 year then nothing more overnight. I first blamed the main box then after a direct test on the battery it works. I took the energy from the same place as you after testing with a multimeter I got 6 or 7 volts. I checked the fuses too and need to check the EMF box now.
I bought a new kit and plan to take the power to the main box on the hazard lights.
Could you tell me exactly how you wired you main controller and sub controllers. What wire colors do I need to connect the red to and the black to. I have a 2015 435i f33 convertible. Do I need to disconnect my battery before I tried to connect these? I didn't actually see you do any wiring in the video , you mentioned how you did it but I'm still a little confused. Thanks and great video you are giving my the confidence to try and do this!
What ever colour wire you pick to tap into out of the white with blue strips or white with orange strip has to match on all controllers so red wire from controller to white with blue strip and black wire from controller to brown. I didn’t disconnect my battery, how ever I did go into idrive and turn off ambient lights and I switched my auto lights to off positions.
I've had some experience with these and had a lot of trouble getting them to stay, even with double stick tape. I noticed at 23:12 your door strip was falling. I'm wondering what your solution was, because I'm thinking about jumping in again with a fresh kit, and i don't want the same fights I had last time.
I’ve used 3m tape with spacers jamming them in every 10cm, they are secure now
@@MREVREN Which 3m double stick tape would you recommend, I saw there are several. Also, what would you suggest to use as a shim/spacer? I love the looks of these but they are an unbelievable pain at times, depending on the shape you're working with.
Hi mate I’ve go this same kit for a Mercedes c class was just wondering if you know what colour cable to connect to thanks
Great vid fella & it looks amazing. Did you disconnect the battery before tapping into the wires?
Thank you. No I didn’t but, I did turn the ambient lights off from the idrive menu.
Hey bro
How is the quality after 6 months now is there any difference in the color or damage or something or all good
How did you push it through the door panel. You said you drilled something but I’m having trouble getting it to go through.
Can you link it in the description?
How did you test the lights before install?
Hi dear, i have the same setup, everything was ok unless i downloaded the app and now i am repenting, have you encountred an issue where the big strips are only glowing half, first i thought the strip might be damaged so i connected the other one but the same, do you know where to fiddle in the app??? And do you know how to reset defaults?
It’s probably a software issue. There was a software problem with mine that I showed and discussed in this video linked below
m.th-cam.com/video/m8WQDzdfBaA/w-d-xo.html
The wiring in the door tapped so i wouldn't have to connect to the door module all the way to the main module? Where can i order?
Anyone else havig issues using the "mic" feature on the app? When I try to use that feature, my aftermarket subwoofer stops working, but the subwoofer works with all the other features on the app.
Hi, with this kit can you set the door pockets to say blue at 100% brightness and have the dash stripss to say red at 50% brightness all at the same time, if you could reply asap that would be appreciated as i need to order asap as im going away in the car in 2w, thank you.
Yes
@MREVREN awesome. just ordered. i installed one the other day. looks mint but its all one colour at a time. strips i want low but door pockets hi. thanks very much for the speedy reply. ill be fitting one to my brothers m3 comp soon too. 🫡
all you had to say was thanks lol, you internet dudes odd as hell 😂
Highly doubt him or anyone reading your comment cares about you installing the same for your “bros m3” 😂😂
Come on now dawg
How do you stop that tacky RGB test sequence at the beginning. Looks terrible doing that at the beginning every time you start the car, which is a shame as it will never look OEM doing that.
You can buy one without that feature
@@MREVREN do you know which ones?
Should be the ones that don’t state they are FULL COLOUR, Should be the ones that just state RGB
@@MREVRENthanks mate 👌
Can disable via app... It's called welcome light
Double side tape just not gonna last.update it now what's the feedback? On summer it be falling down🎉
I downloaded the app but it doesn’t control the light settings. Is there something I’m missing? Do u have a vid showing app connection only?
What’s the name of the app
I have an issue where my door lights are stuck on yellow and won’t react when I changed them In the app can you please help?
where did you get the current for the modules in the door?
From factory ambient light
I have a f30 320d efficient dynamics i tapped into my standard ambient lighting and it stays on for 5 seconds then goes off dose this 5 time them i lose all my ambient lighting till i turn my car off and on and dose it again. Any ideas on this ?? (Black to brown red to red and white
Brown wire only enables in sport plus i think
How do you cut these. Is there a mark.
You can feel it cut just after led
What app are you using to control the lighta
Led lamp
What’s the name of the app ? Can anyone please tell me
That is the most clapped f82 😂😭
How is your corsa running mate?! 😄
How did you stick the bead on the dash is it double sided sticky?
Yes but 3m, the one they provide let’s go in the summer when interior heats up
Thanks, I’m connect door card now I have a red black and yellow cable which should go into which?
@@MREVREN Which one from 3M? I am trying to find one that is pretty thin so it doesn't show
Hello can you cut this lights
Yes
what name app?
LED LAMP