I appreciate the fact that you started at the beginning by explaining that you should feed the fiberglass through the plastic tubing... and you didn't spend a ton of time talking about nonsense. The vid flow. Great job for just your 2nd install.
Them guys are just hating because they spent a bunch of money on installing or led package and we did ourselves for $20 😂. Appreciate the video bro. I ordered them and didnt know where to start. Seen this yesterday did the the installation on my challenger scat pack and it looks awesome. Thanks again 👍🏿
@beast-mode115 Yeah ok buddy. Funny I thought you was a bitch at first. On TH-cam sounding like a straight female. Especially with name shay boss. Grown ass man think likes give you validation. Unalive yourself homie lol..
@@beast-mode115 @beast-mode115 Yeah ok buddy. Funny I thought you was a bitch at first. On TH-cam sounding like a straight female. Especially with name shay boss. Grown ass man think likes give you validation. Unalive yourself homie lol..
Dudes hating in comment because they paid $400 and could have done this themselves lmfao. Thanks I just did my Audi rs5 just like this myself. Came out crisp and saved $465
This video is extremely helpful, the videos done by professionals is always difficult to follow since they are able to take apart their cars. Although this one shows how to install the LED with minimal car knowledge. Thanks for the vid brother 🙏
This is really helpful since you take the shots of every difficult conrners of the car. For me, the way to hide wire in the 2 side doors seem really hard but you've done so well. Thks bro for this video.
yo every other video was not good at explaining how to hide the wires at all, but you actually showed your whole process. THANK YOU!! i'm only just now learning how to install stuff for my car ❤❤
Tbh if you want to hide them where they hang between the door and the car. You can tuck them in into the black tube you see between the door and the car. If anything hmu on insta @ajpstreets I’ve had to explain this to a lot of people. Might have to make another video of “professional” install since I rushed this and one on my car.
The whole point of these leds is to make it look factory but if u not going to remove the panels and install it properly then don't do it at all because it just looks so terrible and noway near factory.
@AJP Streets I don't think wires been crushed by the door jam each time you open and close the doors are factory but hey if you like it then it's cool.
this might be a dumb question but with it just being ziptied in that spot would anything happen if it got wet? like while opening the door if it’s raining or something
Yeah I washed my car and that part has gotten wet. I was being lazy, but if you want to be extra safe you can feed it through the tube that I zip tied to. But personally I didn’t want to do all that work lol and never had any issues.
Yea, best thing to do is buy one with more light bulbs (I seen one with 9) or buy one with the standard 4 bulbs and usb plug in instead of lighter plug in
hey dude i just installed them in my car, the video helped a lot. i appreciate you!!! also. if i wanted to add more lights for the back seat do i have to buy another box?
Well done! But these aren't EL lights, they are led lights shining through fiber optic tubing. However, you have shown a good alternative. You have the aptitude to install EL lighting, so I think you should also maybe fo a vid on that.
I had my homie hold the end of the clear tube, not the actual end but every 6ft away he would pull it so it’s straight while I held the other end and feed it as you go every 6ft
Yesss don’t cut black wire or anything related to the actual laser/light. Only thing you can cut is the clear tube and the clear thing that goes in the tube. Only cut clear lol
Cant wait to get mines done I’m even asked for the day off lol I have a 2014 Cadillac and it comes factory ambient lights but they don’t switch colors.
How do I connect my red and black wire to the battery for my LED lights , and also do I have to use a wire connector or can the wires just touch the positive and negative and work that way
@@Ajpstreetsthank youuuu I ended up connecting it , it was actually waaayyy easier than I thought , this was a question for the UNDER GLOW 😂😂 but I end up figuring it out my Malibu is built a certain way where you don’t have to use anything, I just made the wires touch the battery and it worked fine
Yeah it was hard to feed it through. I had to push it really hard and had to have another person pull the opposite end of the tube. The best way to do it is measure it and feed it as you need it.
I’m trying to put mine in but I don’t know if I should cut it, I’m scared once I cut it, I’m going to mess it up 😣 and my dash is weird where I can’t get it to go over my steering wheel because there’s no dash crease to stick it in,& it’s like wires everywhere along with my CarPlay tablet I bought off tiktok lol I just don’t know what to do with all the damn wires every damn where 😩
definitely the best tutorial out there, but jsut one question. Im pretty sure you show this lol but im just dumb, where does the power for all the leds come from? like where are you plugging it in.
Thank you bro i definitely could’ve done better job tho! And so main power is going into cigarette lighter and all those silver things should light up. That’s the little laser/light is, so once you attach the clear tube/plastic thing that goes into the dash that’s how it lights up. So the plastic things aren’t lights it’s the laser light in the silver cylinder looking thing. Let me know if you need any help or hmu on insta @ajpstreets
@@Contier7 tbh confused on what your asking but if your car doesn’t have Bluetooth you can buy a transmitter that transmitter Bluetooth through your radio using this device below. Link for Bluetooth transmitter: amzn.to/4drxmkg
@@Ajpstreetsdang once you do this for the first time you feel like a professional after lol, thanks for the help i came back to this video so many times when doing the doors
If you go to 3:00 of the you can see how I do it. You can run it through that black tube if you really wanted to. I just didn’t have time to do all that tbh.
None the link I provided comes with 5 light laser things. 1 for left door, 1 for right door, 2 for middle and 1 for lower center area where the shifter is.
Hi thanks for the video. No issues with the battery? Idk why but i'm always affraid when i turn off and park my car, it continues to drain power from battery 😅
Nah long as you turn them off. I usually turn it off whenever I leave my car for long periods of time. I’ve left them on overnight once and still didn’t die, but chargers do have two batteries. I’ve had the lights for 2 hours now and no issues 🤞🏽
@@Ajpstreets Sorry for my late reply, thanks a lot my friend for the help. Did you knew that there are now really thiner leds? It's way more easier to install them
I watch this video several times. I bought this product and tried to install it in my 2021 Kia forte gt. I tried for about 10 minutes and I gave up. I felt like i was destroying my car a little bit. Its very difficult to make it look Factory. I dont like the idea of opening the doors amd seeing wires. Theres not alot of places to install the product. Its hard to bend it around curves and edges. Also, the whole point in my mind was to light up the floor. This wont do that. You will need to buy another set of lights for the floor. I'm returning this product and just getting the light bars on the feet. Great video though. Very helpful. I would do this on an older car, but not my mew car.
The floor lights are called ambient lighting kits, and they are much easier to install because they literally just stick under your seat with double sided tape. These wires are also easier to hide because they don't run along the door and don't need hidden in the door panel.
Yeah I’m not sure how Kia’s interior is but I know for a fact that dodge they fit perfect. But yeah floor ones are super easy and can’t be noticed. And thank you for the feedback & support 🙌🏽
I don’t think it’s matters if it’s factory or not it’s jus da fact dat u have dem which is da whole estatice an purpose of gettin then an this is a good video because I been tryna do dis cause I jus got ma 1 charger so thanks 💯
@@Ajpstreets @AlexAutoFun Thanks! One more question. Could I save a certain light mode setting on the app and have it on that setting whenever I start the engine? Or does it always just goto default it turns on?
Great video for people who have hun dreads of dollars to spend and just want they car to have a bit of ambiance to it thank you thus video. Definitely helped 💯💯
appreciate you bro! Did you use 2 laser things for middle portion or just one? On mine I used two separate laser light things “silver thing with light in it” that’s why it’s bright. So if you have one it won’t be as bright
If you’re talking about the clear tube and that clear plastic thing goes in the tub. Yes you can cut those. DO NOT cut the black wire. Both clear plastics things are not related to any wires so cut em. If anything hmu on instagram @ajpstreets
@@bravorizo2527I just put the strip over the dash. Pretty line it up how you’d install and cut little longer so you have extra if you mess up or anything.
Im having trouble getting the led wire thru the clear strip lol they just get stuck at one point and when I think I’m pushing the light strip thru it’s just in the same spot. Anyone experience this?
Yeah bro it’s really common. Have someone hold the strip straight and tight (as if they’re pulling it. You see how I did it in the video. My buddy was holding it straight out like 10 feet away as I was holding it and pulling as well as feeding the clear thing through it. Hope it makes sense. Lmk if not
@@Ajpstreets Didn't help at all :/ honestly might just give up and return them I've spent 2 hours trying to do it and it won't budge no matter what I do
So I reinstalled these in a 2011 Camaro and got damn is it so hard to wire these with all the sharp curves. The wire is hard to hide because it’s a couple and I kinda felt like I damaged a bit of the interior. Other than that it look good though. Aside from the shit exposed wires.
Yeah I could’ve hit the wire but tbh didn’t even wanna put all that work in. And yeah feeding that clear thing through the tube is hard. Definitely a two person job.
@@Ajpstreets did this drain your battery? My shit tanked after like 2 days. I’m not sure if it’s the LEDS itself or the double cigarette charger port I bought from Walmart. I think it’s parasitic drawing my battery even when the engine is off.
@@Kenthetic ummm I’m not sure bro for me the lighter thing came with a button to turn off and on. Also just make you turn the lights off and try unplugging it after use and see if it makes a difference. It could be the Walmart dual lighter.
Hey there 🥲, would you mind mind to come to my house and help me settle this up, cause I finish buying it and struggle to install it. I’m mad serious asking you to help me with this one😭😭. Please and thank you.
i ran the ones i did thru the door grommet all you have to do is drill a hole to fit the plug thru and the rest of the wire and light is hidden inside the door panel
@@Ajpstreets it was my first time doing it in a car. so it took me a little while to figure out how to run it. it was in a 300. but when i do my widebody i’ll probably make a video. same when i do my starlight
@@Ajpstreets I installed it in my mom’s Camaro yesterday. Looked cool aside from the door curves being hard as hell to fit. But she made me take ‘em out, it was easy and fun though.
Hey broski ! Loved the video I think it came out great !🔥👏🏼 question though ! Is it necessary to do the door panels as well? Or can I use them for the dash only ?
Ayeeee I appreciate you bro🙌🏽 and you can only do the dash if you wanted to. I showed the doors cuz that’s how I have mine and people wanted to see. My friend got a mustang and he only did his dash. Looks clean on them s550’s.
Well I will be next doing a video stalling it on mitsubishi mirage 2024 will be hard doors doesn't have to much gabs 😢😢😢 and there is no vids of that car
Strange title for led lights but a useful how to for a quick bodge job install. How about doing a quality EL Wire professional fit where you get an even glow the whole length of the wire.
@@Ajpstreets Yeah I ended up ruining them from trying so hard so I ordered a replacement 😭 I'm just gonna try to put the tube in the trim by itself just to measure out how much I need and just put the light in as needed. I just wanted to get it all done out of the way but I think mine was just too long
Never I repeat NEVER ZIP TIE A WIRE TO YOUR DOOR CONDUIT 🤦♂️ take off the glove box and door panel and feed it through it takes 5 more minutes for each door. 2 months that wire will be frayed and all your work will be for nothing
Yeah bro I know. I could’ve done it that way after someone told me, but tbh I ain’t doing all that and surprisingly it’s been good for having it like that for 2 years
So if your steering wheel is all the way up put it all the way down. There is soft leather material that has a big hole in. You can stick your hand in from top of the steering wheel through that leather piece. And with the other hand put the light/wire from below and pull with hand on top. You gonna have to use both hands and make them meet in the middle. If this doesn’t make sense hmu on Instagram @ajpstreets and I’ll send you a quick video of it
I appreciate the fact that you started at the beginning by explaining that you should feed the fiberglass through the plastic tubing... and you didn't spend a ton of time talking about nonsense. The vid flow. Great job for just your 2nd install.
Really appreciated!
How do you get wire all way in tube of plastic ?@Ajpstreets
Them guys are just hating because they spent a bunch of money on installing or led package and we did ourselves for $20 😂. Appreciate the video bro. I ordered them and didnt know where to start. Seen this yesterday did the the installation on my challenger scat pack and it looks awesome. Thanks again 👍🏿
Ayeeee let’s goooo
Only 19 people agreed with you😂😂 this shit was sloppy as hell😂
@beast-mode115 Yeah ok buddy. Funny I thought you was a bitch at first. On TH-cam sounding like a straight female. Especially with name shay boss. Grown ass man think likes give you validation. Unalive yourself homie lol..
@@beast-mode115 @beast-mode115 Yeah ok buddy. Funny I thought you was a bitch at first. On TH-cam sounding like a straight female. Especially with name shay boss. Grown ass man think likes give you validation. Unalive yourself homie lol..
@@beast-mode115 You sound like a whole bitch rn.. name and all 💀
FINALLY A GOOD TUTORIAL THAT DOESNT INVOLVE TAKING APART HALF OF MY CAR😂😂😂
Frrrr!! I didn’t mind wires being out. I was not finna take everything off the car lol
Dudes hating in comment because they paid $400 and could have done this themselves lmfao. Thanks I just did my Audi rs5 just like this myself. Came out crisp and saved $465
Frrr and of course!! Thank you 🙌🏽
I did mine myself but idk if I want the wires like that I need to do the doors I did the dash and center console
This video is extremely helpful, the videos done by professionals is always difficult to follow since they are able to take apart their cars. Although this one shows how to install the LED with minimal car knowledge. Thanks for the vid brother 🙏
Ayeeee let’s goo! Yessir 🙌🏽
I agree with you. 😢 I trust myself but not that much to take apart my car😭
This is really helpful since you take the shots of every difficult conrners of the car. For me, the way to hide wire in the 2 side doors seem really hard but you've done so well. Thks bro for this video.
Ayeeee let’s gooo! I really appreciate that 🙌🏽
yo every other video was not good at explaining how to hide the wires at all, but you actually showed your whole process. THANK YOU!! i'm only just now learning how to install stuff for my car ❤❤
Tbh if you want to hide them where they hang between the door and the car. You can tuck them in into the black tube you see between the door and the car. If anything hmu on insta @ajpstreets I’ve had to explain this to a lot of people. Might have to make another video of “professional” install since I rushed this and one on my car.
Installed mine last night with ease! First time installing. Your vid was SUPER helpful. Thanks!!
Ayeee thank youuu🙌🏽
I just finished mine. It took me 4 hours 😭 and I couldn’t get the left corner dash to go in but this video was really helpful I appreciate it 😊
Bro trust me. The corners are the hardest 😭, but hey it was worth it!
@@Ajpstreetsdude these fucking corners are making me lose my mental I swear 😭😭
Same but there's another product like it on Amazon and iy has smaller heads to hide in between
Now this... Is what I call 'easy'. Thank you 😊😊
Haha that’s why I did it the way I did. I don’t have time to go all in 😂. And thank you!!
The whole point of these leds is to make it look factory but if u not going to remove the panels and install it properly then don't do it at all because it just looks so terrible and noway near factory.
It looks pretty factory to me in my opinion. Even when they’re off it’s not bad.
@AJP Streets I don't think wires been crushed by the door jam each time you open and close the doors are factory but hey if you like it then it's cool.
@@0togtr811 yeah they’re chilling. They’ve been pretty good for over a year now 🤷🏽♂️ appreciate you bro
My car came with factory ambient lights and this look pretty damn close to me . Great job!
@@S__B. I wish Dodge did this from factory, but hey I appreciate you 🙏🏽
You’re the goat! Appreciate the rundown
Thank youuuu 🙌🏽
this might be a dumb question but with it just being ziptied in that spot would anything happen if it got wet? like while opening the door if it’s raining or something
Yeah I washed my car and that part has gotten wet. I was being lazy, but if you want to be extra safe you can feed it through the tube that I zip tied to. But personally I didn’t want to do all that work lol and never had any issues.
One thing i just thought about after installing. For the door lights. Rain water isnt gunna break them? Cuz its outside the door seal
Mine are still good even after rain or washes. I don’t think the water gets in there like I thought it did. You’ll be okay too brother 🙌🏽
Question man is 1 kit enough to do the dash, center console front doors and rear doors, or do I need 2 kits?
If you want to do rear doors you’ll need 2. 1 kid does front dash, center console, and 2 front doors.
@ cool thanks brotha
Good looking out , Video helped a lot.safest way so wires don’t get any harm in the door way ?
You can tuck them in the black tube between the door and the car. Mine never had any issues even with it being out
Ordered mine today i cant wait homie.
Ayeeee let’s gooo
Why not get separate small ones for each door and run it to the bottom light on te door.
Well they have to be plugged into the cigarette lighter 🤷🏽♂️
Yea, best thing to do is buy one with more light bulbs (I seen one with 9) or buy one with the standard 4 bulbs and usb plug in instead of lighter plug in
hey dude i just installed them in my car, the video helped a lot. i appreciate you!!! also. if i wanted to add more lights for the back seat do i have to buy another box?
Ayeeee let’s gooooo! And unfortunately yes. That’s why I only have mine on the front.
do you have any tips for how to fix a wire that detached from the rgb aluminum fastener?
Ummm wire? Or the clear thing? If you talking about the clear strip then tighten that screw with a screw driver on silver fastener.
@@Ajpstreetsthe colored wires
This is the most useful video I've seen thank you
Ayeeee let’s gooo! 🙌🏽🙏🏽
Well done! But these aren't EL lights, they are led lights shining through fiber optic tubing. However, you have shown a good alternative. You have the aptitude to install EL lighting, so I think you should also maybe fo a vid on that.
Oohhh my bad bro! And yessir I really appreciate you 🙏🏽🙌🏽
How did you feed the light all the way through the tube without cutting ? That has been my biggest issue with these lights.
I had my homie hold the end of the clear tube, not the actual end but every 6ft away he would pull it so it’s straight while I held the other end and feed it as you go every 6ft
I’m just so nervous to cut the lights idk why. Like you can just cut the light and the clear thing it goes into??
Yesss don’t cut black wire or anything related to the actual laser/light. Only thing you can cut is the clear tube and the clear thing that goes in the tube. Only cut clear lol
Cant wait to get mines done I’m even asked for the day off lol I have a 2014 Cadillac and it comes factory ambient lights but they don’t switch colors.
Ayeeee they’re pretty dope bro! I love mine
Finally got mines installed looks 🔥🔥
@@cristiana9645 ooooo bet bet they’re lit
Any problems going through the car wash and them getting wet or shorting? I just installed these (again lol) and I have to wash my car soon
No sir I’ve driven in rain, the wires have got wet from washing the car, the water has gotten inside the laser and yet I never had any issues.
How do I connect my red and black wire to the battery for my LED lights , and also do I have to use a wire connector or can the wires just touch the positive and negative and work that way
I didn’t directly wire them to the battery. I just used the cigarette lighter.
@@Ajpstreetsthank youuuu I ended up connecting it , it was actually waaayyy easier than I thought , this was a question for the UNDER GLOW 😂😂 but I end up figuring it out my Malibu is built a certain way where you don’t have to use anything, I just made the wires touch the battery and it worked fine
Thanks for this tutorial, didn't want to take off my door panels 👍 🔥 big love from england
Oooohh shoot England let’s gooo! Appreciate the support 🙌🏽
When u put the plastic into the tube did u have any problems because mine keeps getting stuck?
Yeah it was hard to feed it through. I had to push it really hard and had to have another person pull the opposite end of the tube. The best way to do it is measure it and feed it as you need it.
I’m trying to put mine in but I don’t know if I should cut it, I’m scared once I cut it, I’m going to mess it up 😣 and my dash is weird where I can’t get it to go over my steering wheel because there’s no dash crease to stick it in,& it’s like wires everywhere along with my CarPlay tablet I bought off tiktok lol I just don’t know what to do with all the damn wires every damn where 😩
If you cut it make sure it’s the length you want. And tbh you just have to find spots to hide the wires 😭 what kinda car is it?
Bro didn't even record the end result wtf
🤦🏽♂️ my bad bro. Check out any of my night videos you’ll see how it looks. As well as the thumbnail
definitely the best tutorial out there, but jsut one question. Im pretty sure you show this lol but im just dumb, where does the power for all the leds come from? like where are you plugging it in.
Thank you bro i definitely could’ve done better job tho! And so main power is going into cigarette lighter and all those silver things should light up. That’s the little laser/light is, so once you attach the clear tube/plastic thing that goes into the dash that’s how it lights up. So the plastic things aren’t lights it’s the laser light in the silver cylinder looking thing. Let me know if you need any help or hmu on insta @ajpstreets
@@Ajpstreets okay thanks bro ill def come back to this when i have any questions. do you think this amount of leds would be enough for a volvo
@@Contier7tbh for my charger I just did the front dash and front two doors. If you thinking about doing back as well you might need more.
@@Contier7 tbh confused on what your asking but if your car doesn’t have Bluetooth you can buy a transmitter that transmitter Bluetooth through your radio using this device below.
Link for Bluetooth transmitter: amzn.to/4drxmkg
@@Ajpstreetsdang once you do this for the first time you feel like a professional after lol, thanks for the help i came back to this video so many times when doing the doors
i js put some similar lights in on my challenger n it turnt out hella cleann🫣appreciate it brotha glooks
On god bro! They look so good especially for dodges it’s just a perfect fit for them.
Where do you hide the power box so it’s not noticeable? Where’s the best location to put it as well so wires aren’t showing?
So for me my cigarette lighter port is in my center console. That’s where I hid it.
Looks nice I wanna try it with the mustang
I know a homie who had it and looks good on any tbh
Does it matter where I cut the tubing ?
Not really just make sure it’s the length you want
how is it holding up a year later? genuinely asking might kop it for my car!
No issues at all. If you want I’d recommend tucking the wires in the black tube but I didn’t care personally. Either way it was still good
Always disconnect the battery before install so you don't have any error codes or other mishaps if you ever do a hard install
how does this work with the doors? would it just come out when you open it
If you go to 3:00 of the you can see how I do it. You can run it through that black tube if you really wanted to. I just didn’t have time to do all that tbh.
@@Ajpstreetshell yeah i appreciate it im def gonna put these in my moms car now🤣
How many extra strips did you have to buy to get everything?
None the link I provided comes with 5 light laser things. 1 for left door, 1 for right door, 2 for middle and 1 for lower center area where the shifter is.
Hi thanks for the video. No issues with the battery? Idk why but i'm always affraid when i turn off and park my car, it continues to drain power from battery 😅
Nah long as you turn them off. I usually turn it off whenever I leave my car for long periods of time. I’ve left them on overnight once and still didn’t die, but chargers do have two batteries. I’ve had the lights for 2 hours now and no issues 🤞🏽
@@Ajpstreets Sorry for my late reply, thanks a lot my friend for the help. Did you knew that there are now really thiner leds? It's way more easier to install them
How come mine is only bright on the tips and not the rest. I got the same kit
Ummmm tbh I wish I had my scat to show you mine lol. Send me a video on insta! @Ajpstreets
I watch this video several times. I bought this product and tried to install it in my 2021 Kia forte gt. I tried for about 10 minutes and I gave up. I felt like i was destroying my car a little bit. Its very difficult to make it look Factory. I dont like the idea of opening the doors amd seeing wires. Theres not alot of places to install the product. Its hard to bend it around curves and edges. Also, the whole point in my mind was to light up the floor. This wont do that. You will need to buy another set of lights for the floor. I'm returning this product and just getting the light bars on the feet. Great video though. Very helpful. I would do this on an older car, but not my mew car.
The floor lights are called ambient lighting kits, and they are much easier to install because they literally just stick under your seat with double sided tape. These wires are also easier to hide because they don't run along the door and don't need hidden in the door panel.
Yeah I’m not sure how Kia’s interior is but I know for a fact that dodge they fit perfect. But yeah floor ones are super easy and can’t be noticed. And thank you for the feedback & support 🙌🏽
How can I customize the lights through app
The app has different settings explore the menu from bottom and it has a lot on it
I don’t think it’s matters if it’s factory or not it’s jus da fact dat u have dem which is da whole estatice an purpose of gettin then an this is a good video because I been tryna do dis cause I jus got ma 1 charger so thanks 💯
Yesssirrr! I gotch you🙌🏽 appreciate the support
Hi, does the lights turn on automatically when the engine is started? Or have to turn on manually?
Manually or you can use the app.
@@Ajpstreets @AlexAutoFun Thanks! One more question. Could I save a certain light mode setting on the app and have it on that setting whenever I start the engine? Or does it always just goto default it turns on?
@@raymandarinheroes9329 it’ll stay in the settings you leave it on. It only changes by changing it on app.
@@Ajpstreets what’s the name of the app ?
@@392Bris it should be in the lights barcode if not the app is called “lotus lantern” it’s a lotus with a Bluetooth symbol.
Mine didn’t come with the yellow dash tool even tho it’s advertised in the photos
Contact the Amazon seller they can swap it or send you a new kit.
I want to do all doors and dash. You think I need to order 2 or 1 should be fine
One is enough for front doors and dash. If you trynna do back then yes you’ll need 2 most likely.
Great video for people who have hun dreads of dollars to spend and just want they car to have a bit of ambiance to it thank you thus video. Definitely helped 💯💯
Yessir thank you! I definitely could’ve done a better job on hiding the wires, but personally didn’t want to put the time in if they ever broke.
Nice🔥, I’m boutta order
Bet bet
Bro deadass jus saved me $300 😭😭😭😭 jus did it for my pops hellcat shit look fye 💯🔥
Ayeee let’s go!! Not worth paying $300 for some cheap lights 😂
Does it work on any car? I have a 2012 odyssey and I wanna make it a lil less boring
Yessir it’ll go in any car. If anything you can always return it, but I promise you you’ll like them 🙌🏽
hey loved the video but was wondering when i did my doors how come the middle portion isnt as bright as the rest?
appreciate you bro! Did you use 2 laser things for middle portion or just one? On mine I used two separate laser light things “silver thing with light in it” that’s why it’s bright. So if you have one it won’t be as bright
@@Ajpstreets are u talking abt the wires or what lasers?
@@shrumpertpertacticle6068 I’m talking about the little thing where the light comes out. Hmu on Instagram I can explain it.
@@Ajpstreets I sent u a dm asking about it
How many bubls did it come with because 4 doors 2 head dash and 1 middle console that's 7 ? ?? Mine came with only 5
It’s only 5 mine was 5. They sell ones that are more but I didn’t want the lights in the back tbh
Can u cut the wire or when u get to the cutting part do you have to pull the wire out then cut the plastic pipe
If you’re talking about the clear tube and that clear plastic thing goes in the tub. Yes you can cut those. DO NOT cut the black wire. Both clear plastics things are not related to any wires so cut em. If anything hmu on instagram @ajpstreets
@@Ajpstreets so the wire that goes inside the tube i can cut that or will it not work since i cut it
And also how did u measure to make sure it fit all through the car
@@bravorizo2527I just put the strip over the dash. Pretty line it up how you’d install and cut little longer so you have extra if you mess up or anything.
@@Ajpstreets do you line the wire with everything before you cut it
Easy to install you shoulda showed the results at night tho. Ain’t hating jus saying
Yeah bro idk how I forget to 🤦🏽♂️ check out my night pov vids you can see
What web site to purchase the led lights
Check out the link in description and highlighted comment
What is the app called to change the color
It’s called LotusLanternX
what app to change the colors
It’s called LotusLanternX and it has the lotus 🪷 flower outline with Bluetooth logo
Can we do that on Mercedes c300 2011
Yes you can
Thanks bro
Im having trouble getting the led wire thru the clear strip lol they just get stuck at one point and when I think I’m pushing the light strip thru it’s just in the same spot. Anyone experience this?
Yeah bro it’s really common. Have someone hold the strip straight and tight (as if they’re pulling it. You see how I did it in the video. My buddy was holding it straight out like 10 feet away as I was holding it and pulling as well as feeding the clear thing through it. Hope it makes sense. Lmk if not
@@Ajpstreets Didn't help at all :/ honestly might just give up and return them I've spent 2 hours trying to do it and it won't budge no matter what I do
Man work an quality work are two different things
💀
Can i get a link to the kit u used in the video not the cheaper one
amzn.to/482RyXb
so where’s the results
My bad bro was in rush! Check out my night pov video you’ll see it
Do these works for any car?
Most cars that have little gaps in the dash.
you can change the color of the lights right ?
Yessir you can.
So I reinstalled these in a 2011 Camaro and got damn is it so hard to wire these with all the sharp curves. The wire is hard to hide because it’s a couple and I kinda felt like I damaged a bit of the interior. Other than that it look good though. Aside from the shit exposed wires.
Yeah I could’ve hit the wire but tbh didn’t even wanna put all that work in. And yeah feeding that clear thing through the tube is hard. Definitely a two person job.
@@Ajpstreets did this drain your battery? My shit tanked after like 2 days. I’m not sure if it’s the LEDS itself or the double cigarette charger port I bought from Walmart. I think it’s parasitic drawing my battery even when the engine is off.
@@Kenthetic ummm I’m not sure bro for me the lighter thing came with a button to turn off and on. Also just make you turn the lights off and try unplugging it after use and see if it makes a difference. It could be the Walmart dual lighter.
Does anyone know the name for the website to control the color
It’s called Lotuslantern in AppStore. With a lotus outline with sideways Bluetooth logo.
I finished mine but can’t find what the app is called, do you know?
Ayeeee and it’s called LotusLanternX
Hey there 🥲, would you mind mind to come to my house and help me settle this up, cause I finish buying it and struggle to install it. I’m mad serious asking you to help me with this one😭😭. Please and thank you.
😂😂 I would if I could
i ran the ones i did thru the door grommet all you have to do is drill a hole to fit the plug thru and the rest of the wire and light is hidden inside the door panel
Oohhh word. Well I didn’t think of that 😭😂
@@Ajpstreets it was my first time doing it in a car. so it took me a little while to figure out how to run it. it was in a 300. but when i do my widebody i’ll probably make a video. same when i do my starlight
@@jmendez1629 dang bro and ayeeee let’s go i really wanna do the starlight, but things so time consuming 😭
man fr. i got a 1500 light kit coming in
Can u show me how? I have c300 n want to do ambient interior lighting
What’s the little yellow tool you had to make the gaps open more?
it comes with the lights
@@brocknall242 oh ok
Yessir comes with the lights, but it’s called a plastic putty knife or car trim removal kit
@@Ajpstreets I installed it in my mom’s Camaro yesterday. Looked cool aside from the door curves being hard as hell to fit. But she made me take ‘em out, it was easy and fun though.
@@Kenthetic haha yeah they look fire fr. Sucks she made you take em out 😭
What’s the app for the lights?
It’s called LotusLanternX.
Daaaamn you did come trough with the install video 💪
Yesssir took a min to get them lights, but there it is. 🫡
Feed both LED wires into under the steering column lol that way you have ambient lighting on your feet 😅
Lollll tbh I wanna do the star ceiling 🫣
I called couple of audio/rim/tint shops they all charging $600-900 for this. I think they think I have to take door panels off and hardwire.
Yeah don’t pay that bro can definitely do it yourself
are these for dodge onkly?
No you can use them in any car you want!
Hey broski ! Loved the video I think it came out great !🔥👏🏼 question though ! Is it necessary to do the door panels as well? Or can I use them for the dash only ?
Ayeeee I appreciate you bro🙌🏽 and you can only do the dash if you wanted to. I showed the doors cuz that’s how I have mine and people wanted to see. My friend got a mustang and he only did his dash. Looks clean on them s550’s.
Well I will be next doing a video stalling it on mitsubishi mirage 2024 will be hard doors doesn't have to much gabs 😢😢😢 and there is no vids of that car
yo does this work on a 2016 gle
Yes it should. Even works on even Honda accords 😂. long as you have thin gaps in the dash it’ll fit right in it.
you didn't show it off at the end, wft? lol
My bad bro 😂 If you watch any of my videos it’s pretty much the result 🤦🏽♂️
They’re good lights just don’t know what app to use to control them
It’s called LotusLanternX
@@Ajpstreets appreciate it man.
Strange title for led lights but a useful how to for a quick bodge job install. How about doing a quality EL Wire professional fit where you get an even glow the whole length of the wire.
8:26 bro spittin 😭😭
But still helpful video
Hahahahaha my bad bro 😭
How many light pieces is in that kit? Cause I want mine to cover all 4 doors plus the dash
Comes with 5 in total. I used 2 on doors, 2 on dash, and 1 on middle console. If you want to do back doors you’ll have to get 2 kits.
I just put in these lights but can’t find the app can someone people let me know what it’s called
Lotus lantern
I can't even get past stuffing the wire into the tube. I've been doing it for over an hour and I'm not even halfway I wanna kill myself
Oohh man 😭 it’s definitely hard I need a homie to hold the other end of that clean tube.
@@Ajpstreets Yeah I ended up ruining them from trying so hard so I ordered a replacement 😭 I'm just gonna try to put the tube in the trim by itself just to measure out how much I need and just put the light in as needed. I just wanted to get it all done out of the way but I think mine was just too long
@@kobemarcell7972yeah bro just do that that’s a lot better long as you measure right 😅 but lmk how it goes!!
great vid
Appreciate you 🙌🏽
How are the lights holding up ?
They’re great so far it’s been over a year now 🫡
Legend 😏
😂doesn’t miss a single video
How do you change color
With the app! It’s called “Lotus” the box should come with instructions and scan code to download the app directly.
aint no way u didnt show them lit up in the dark
Yeah bro I did the thumbnail but forgot to record the results. Most of my night videos it’s on if you wanna see what it looks like.
awesome video bro thanks
Ayeeee I really appreciate you bro! 🙏🏽🙌🏽
Thank you ❤❤
Nah thank you 🙌🏽
I use a 9Drive throttle response controller. Would I need to unplug that to use this?
Nah you shouldn’t need to cuz the lights use cigarette lighter.
How long they last ? ❤
Had mine for 2 years now no issues
ok but how do you take it out?
Confused me take out what?
the damn lights bro@@Ajpstreets
@@MrPog-yd1fu pull it out? the way you put it in the way you take out
Never I repeat NEVER ZIP TIE A WIRE TO YOUR DOOR CONDUIT 🤦♂️ take off the glove box and door panel and feed it through it takes 5 more minutes for each door. 2 months that wire will be frayed and all your work will be for nothing
Yeah bro I know. I could’ve done it that way after someone told me, but tbh I ain’t doing all that and surprisingly it’s been good for having it like that for 2 years
What lights are they?
Check out the link in the description 🙌🏽
Good job! It's always a ding dong that says something dumb asf like you should be professional when this is clearly a DIY product.
On god bro. Appreciate you 😂
I can't seem to feed the wires my wires from the bottom through the steering wheel any idea what I could be doing wrong?
So if your steering wheel is all the way up put it all the way down. There is soft leather material that has a big hole in. You can stick your hand in from top of the steering wheel through that leather piece. And with the other hand put the light/wire from below and pull with hand on top. You gonna have to use both hands and make them meet in the middle. If this doesn’t make sense hmu on Instagram @ajpstreets and I’ll send you a quick video of it