On a muddy place is good to have a better traction with a lower presure back tire In an rocky enduro its good to have your front tire a little bit low so you dont recive those impacts as hard
Y’all are the inspiration for me to ride, I am not that confident but I turn on one of your videos, and it feels like I’m learning and coming out of that shell. I don’t know if that makes sense but that is how it feels, keep on inspiring and keep on riding. Love y’all.
You should make a video on what gear you’re on while riding on the track. Like what gear you’re on when you’re approaching a jump or on a corner or on whoops, etc.
One more for the levers is to slide them to the Taper of the bars. This will make you use a proper grip and help prevent the death grip and also help to keep your elbows up. But obviously if you run short levers you don't want to slide them all the way over but just enough so that it forces you to hold the grips properly in order to be able to keep your finger on the levers. And also you can use plumbers tape under the lever clamps to allow some slippage in a crash to help prevent your levers from breaking(for those of us that can't/don't want to spend the money on flexible levers)
Definitely would be helpful I gone through many bends and I still haven’t found one I’m in love with. I’m riding cr high right now love the height not the sweep. Love the sweep and width of the Husqvarna bend but not the height it’s a super low bar.
Excellent advice guys! So funny that I anticipated them all except turning the tires around. What a great idea! Since it’s towards the end of the season, I’m gonna do that this weekend and get the rest of the season out of the tires I have. Thanks for posting that!
I am 6'3" and ride an EXC 500. After much experimentation I have found that using Pro Taper EVO Windham RM Mid bend handlebars are best for me. Many taller riders use these bars. I do roll the bars slightly forward, though I am comfortable with them at zero, +1 or -1. You can also vary the bar "roll" with the fork height setting. Good luck!
Hey Tyler, I have my crf 250r 2006 and its in used condition, do you have any tips on what you would do to it first to make it most comfortable to ride for you. I feel like mine is all jacked up, like my handle bars are turned when im going straight ever so slightly and even loosening the triple clamps and spinning the tire and locking up the front brake wont straighten the front end to it being perfectly straight and center how i want it. Can u give me a list of the first couple things you would do to an older used bike? Thanks for taking the time to help me out!
@@ezekielstark7366 Yes but only if the valves get tight which i have come to know owning this bike that it is very common for that to happen. You need to open the head to where the cam is and adjust the valve clearance, its about a 2/3 difficulty level. Once you get them to the correct clearances it should start up no problem
Probably the stones in the dirt, even boat propellors wear down with friction from water u wouldn't think that eh, so probably just friction with the dirt would wear them down, I was bad for riding my dirt bikes on the streets that's why I used to go through so many tyres.
Zach Ruiz a 125sx is more of a race bike, but it still works on trails. It matters what you’ll be doing more of, more track, then yes, it’s a great bike. More trail, then I would recommend a XC-W or a EXC-f. If u want a cheaper trail bike then I would get a WR-f or a CRF-f. I hope I don’t sound like a know-it-all cause it’s all up to u
I’ve wanted a bike for forever which was since I was 5. And I can’t afford one I was wondering if you guys could give me one or give me one at a. Low price for like 1000 1500 please answer me back. I just want a bike so bad.
![12 Best Dirt Bike MODS For TRAIL Riding [+BONUS Tip]](http://i.ytimg.com/vi/Ak5esFa1KX8/mqdefault.jpg)
![Best Dirtbike Mods - from $1 to $500! [Free, and Expensive AF!]](/img/n.gif)
EVERYONE LIKE FREEEEE . Which was your favorite tip????? COMMENT BELOW LETS GOOOOO
Probably the tire tip! That was a great one! I'll have to use it!
On a muddy place is good to have a better traction with a lower presure back tire
In an rocky enduro its good to have your front tire a little bit low so you dont recive those impacts as hard
Getman 43 try it out for sure
Big joints instead of little joints!!
Yessir
Cut off muffler
Glue throttle wide open
Disconnect the brakes
Remove the seat
Great tips👍🏻😂
😂😂😂
You forgot to remove the governor...lol
Remove the rev limiter
Forgot the most important.... Disengage the kill switch
Y’all are the inspiration for me to ride, I am not that confident but I turn on one of your videos, and it feels like I’m learning and coming out of that shell. I don’t know if that makes sense but that is how it feels, keep on inspiring and keep on riding. Love y’all.
The tire flip tip was my favorite! I'm always needing new tires so hopefully this will help even just a little bit!
Yessssss
The cockpit is the first thing a rider should get dialed in for themselves, and your tips were spot on!
Seven dislikes at this point, and yet every single "Tip"/Upgrade was spot on, and very necessary for every rider and every bike. Must be trolls.
I picked up my first bike yesterday
Its a
Honda crf 250r twin pipe 08/09
I watch a lot of these vids and will continue to
You should make a video on what gear you’re on while riding on the track. Like what gear you’re on when you’re approaching a jump or on a corner or on whoops, etc.
Thanks so much for this info. I'll now be experimenting with sag and tire pressures.
I would say the forks and flipping the tires were the most helpful to me because it was something I didnt know so thanks for the help guys
One more for the levers is to slide them to the Taper of the bars. This will make you use a proper grip and help prevent the death grip and also help to keep your elbows up. But obviously if you run short levers you don't want to slide them all the way over but just enough so that it forces you to hold the grips properly in order to be able to keep your finger on the levers. And also you can use plumbers tape under the lever clamps to allow some slippage in a crash to help prevent your levers from breaking(for those of us that can't/don't want to spend the money on flexible levers)
If you get rid of the loose nut behind
the handlebars, it's the equivalent of
gaining 19hp.
You should do a video on picking a bar bend. Im planning on replacing my bars but have no idea on what i should get for a bend
Thanks for the idea !
Definitely would be helpful I gone through many bends and I still haven’t found one I’m in love with. I’m riding cr high right now love the height not the sweep. Love the sweep and width of the Husqvarna bend but not the height it’s a super low bar.
@@jeremy_moto_192 use those husqvarna bars you like and put 10,20mm risers on
Make a video about short rides please
Love the channel keep up the good work👍
Great video keep it up your videos help so much
frist good comment
Excellent advice guys! So funny that I anticipated them all except turning the tires around. What a great idea! Since it’s towards the end of the season, I’m gonna do that this weekend and get the rest of the season out of the tires I have. Thanks for posting that!
Actually, I should add the handlebar tip was very very good. I did not actually anticipate that one.
Please make a video about how to SHIFT AND BRAKE WHILE STANDING UP💯💯💯💯💯🔥🔥🔥🔥🔥🔥🤩🤩@TheMxFacrort
Yessss thisssss
You just shift like you would while sitting down, but just stand up
It's the same as if you were sitting down
Glad you made this video helped a bunch
Yeah same
Glad to help💪🏻
@@TheMxFactory no money involved either!!👍👍
You can also take a grinder and grind the knobs down until they’re sharp again. Definitely a hack, but it helps.
make a vid on what u should to go racing like what to pack wich things to check on ur bike and all of those things
yes
Yes
do dirt bike people run tubes or tubeless?
i'd say fork height is new to me, gonna have to play with that. My track has more sharp corners than sweepers so I'll mess with it a little bit
I think I have a better tip than anything mentioned. Improve the rider. Whole bike works better after that lol.
ill take second place
Tyler thank for the advice 🤙👍
i just took a hard crash at budds creek yesterday and i walked away with a sore back and broken helmet no concussion yet 👍🏻
Mx Factory ROCK's!
Would You please make a video on how to regrip while riding to make it possible to twist the trottle to open full gas?
Very cool tips.
Great videos as always!! Love the Randy Macho Man Savage glasses.
Take out tge steering stop🤷♂️
that bike is so clean tips?
Never clicked so fast
Oh yeahhhhh🤘🏼
Cool shades brah!
Music sounds like ur selling garden furniture 😂
I have a XC-W 300 and am 6'4", should my bars be aligned with the forks or slightly forward? I do a combo of motocross and trails.
I’m no expert, but I would do whatever position seems most comfortable.
I believe he said inline with forks or slightly behind
Hander Thrime yeah lol. Didn’t watch much of the video yet. 👍
What bend bars are you running stock? I’m about that height she run CR high bend bars big improvement
I am 6'3" and ride an EXC 500. After much experimentation I have found that using Pro Taper EVO Windham RM Mid bend handlebars are best for me. Many taller riders use these bars. I do roll the bars slightly forward, though I am comfortable with them at zero, +1 or -1. You can also vary the bar "roll" with the fork height setting. Good luck!
Ya bro ima do this
Do ittttttttt
Ohh yeah another vid im exited
Sameeeeee
@@TheMxFactory hi boi im a fan but i dont blow air
I mess with the sag and flip my bike when I rode it
great video 👌
Don’t forget to cut your fenders! Those things just add a ton of drag; first thing you do is always cut your fenders.
Love vids been whatching for ever keep it up and do u reckon u could make another whip vid thx 😊 keep it up
This is a good video
Yeah it is!
💪💪
The Mx Factory ✌🏼
Noti gang!🤝
👍🏻👍🏻👍🏻
Nice intro!
Thank you!
@The Mx Factory you should make a video on how to come back the best you can riding from a injury
If this were a car video, Honda drivers would be really happy
Great video as always, thanks guys. Sell out of the Jerseys already? Cant find them on the website.
Its also free to smash that like button 🤙
hey i just subscribed, really love your vids, question? what bike should i get im 13 i have a crf 125
What kind if tires are you running on that bike?
Hey Tyler, I have my crf 250r 2006 and its in used condition, do you have any tips on what you would do to it first to make it most comfortable to ride for you. I feel like mine is all jacked up, like my handle bars are turned when im going straight ever so slightly and even loosening the triple clamps and spinning the tire and locking up the front brake wont straighten the front end to it being perfectly straight and center how i want it. Can u give me a list of the first couple things you would do to an older used bike? Thanks for taking the time to help me out!
Austin Moon I have that bike to. Is yours really hard to start?
@@ezekielstark7366 Yes but only if the valves get tight which i have come to know owning this bike that it is very common for that to happen. You need to open the head to where the cam is and adjust the valve clearance, its about a 2/3 difficulty level. Once you get them to the correct clearances it should start up no problem
@@austinmoon4690 Thanks. Good to know.
Hi
👋👋👋👋👋👋👋
05:40 100% more time.
Whats the sag height for a yz85
I’m 14 and 6’3 I ride a ltz 250 (a quad) but wanna learn to ride a dirt bike ive only ridden one twice a 110
What should I get?
Corban Swan thank you💯
Can I get thoes decals for my 03 crf450r?
Hey
Hi
Thx for the training at cycle ranch
Hello, my TTR90 is too short, and i want to make it taller, but my suspension is horizontal, how can i make it taller?
How do tires wear down on motocross tracks ?? Just currios
Probably the stones in the dirt, even boat propellors wear down with friction from water u wouldn't think that eh, so probably just friction with the dirt would wear them down, I was bad for riding my dirt bikes on the streets that's why I used to go through so many tyres.
The website for the jersey's doesn't work
Second comment
Second
can we hear all your bikes hahhaa
I’m thinking of buying a ktm 125sx. I’m 5”5 and ride trails and track. Do you think this is a good bike
Zach Ruiz a 125sx is more of a race bike, but it still works on trails. It matters what you’ll be doing more of, more track, then yes, it’s a great bike. More trail, then I would recommend a XC-W or a EXC-f. If u want a cheaper trail bike then I would get a WR-f or a CRF-f. I hope I don’t sound like a know-it-all cause it’s all up to u
Do you watch the gate or the pin on the start? I was told to watch the pin but, I watch the gate
Rider preference
Second?
Good job
If you ain't first your last!
-Ricky Bobby
well u need the money to buy the bike and tools
First comment?
Yeahhhh niceee👍🏻👍🏻
aww so close
ye
Get brand new fender mods for free, reach out Ronnie Mac cuz he don't need them
First
And last cut your fricken fenders
2nd commet
not even close
Why aren‘t you wearing your jersey??
I spent money on buying tools
Do people not realize when you flip ur tiree u lose breaking traction
Shopmfx.com isn’t working and I want a jersey lol....
That’s a sexy damn bike 🥵
Free is good so go buy my 'merch' lmao!
I don't have a dirtbike
Reeeeeeeee
Yeeeeeeee
I’ve wanted a bike for forever which was since I was 5. And I can’t afford one I was wondering if you guys could give me one or give me one at a. Low price for like 1000 1500 please answer me back. I just want a bike so bad.
Can you please reply to me
I did
E
Hi!!!!💪🏻🤟🏼
Hi
Hey!