For a regular Joe who has a battery powered inflator for the car, unscrewing it from the tire valve stem caused a lot of air loss. I purchased the "open" LockNFlate and a pipe thread to Schrader valve adaptor and now I have a quick disconnecting inflator. The battery powered inflator cost about $40 and the LockNFlate and Schrader valve adaptor put me back about $50. Now I have the perfect little setup to inflate everything from the wheelbarrow to the car, and all tires in between.
Sounds great but make a demo of using it on a big truck rear wheels set where the rear tires are two with the stems pointing to each other as it is really cumbersome to inflate the outermost tire with any "inline chuck" ...... and I want to stay away from the dang thing when it is going with 60+ PSI !
Thanks for watching and commenting! That would be good to see, I don’t have any wheels set up that way. The grease nozzle locknlube has does have a 90 degree adapter but I haven’t seen that for the inflator nozzle yet. Thanks again for the suggestion, we appreciate you! Have a great day and be safe!
Thanks for watching and your comment. Yes, if you use a manual air chuck this will do that better and easier for you. I am glad I bought it and I think you will be too! Have a great day and be safe!
Thanks for watching and your comment. I agree it’s not cheap, but at the same time Amazon and Ebay are full of cheaper options I’ve tried. Most are around $10 and I’ve been disappointed in each one I’ve used. This is $40 but actually works and we were not disappointed. Eventually Harbor Freight will have a copy but right now if you want something that actually works this is the best option IMO. Have a great day and be safe!
Thanks for watching and commenting. I agree they are expensive but I’ve spent more on the several less expensive ones I’ve tried that didn’t actually work. Soon Harbor Freight or someone will make a reasonable copy but there isn’t any yet that I could find. Have a great day and be safe!
Great review! I just bought one and it works as advertised.
Thank you for watching and your comment. We really like ours! Have a great day and be safe!
For a regular Joe who has a battery powered inflator for the car, unscrewing it from the tire valve stem caused a lot of air loss. I purchased the "open" LockNFlate and a pipe thread to Schrader valve adaptor and now I have a quick disconnecting inflator. The battery powered inflator cost about $40 and the LockNFlate and Schrader valve adaptor put me back about $50. Now I have the perfect little setup to inflate everything from the wheelbarrow to the car, and all tires in between.
That is awesome! Thanks for watching and your comment. That would for sure be a good use for the “open” LockNFlate! Have a great day and be safe!
Sounds great but make a demo of using it on a big truck rear wheels set where the rear tires are two with the stems pointing to each other as it is really cumbersome to inflate the outermost tire with any "inline chuck" ...... and I want to stay away from the dang thing when it is going with 60+ PSI !
Thanks for watching and commenting! That would be good to see, I don’t have any wheels set up that way. The grease nozzle locknlube has does have a 90 degree adapter but I haven’t seen that for the inflator nozzle yet. Thanks again for the suggestion, we appreciate you! Have a great day and be safe!
Open valve is good if you have a regulator with a guage... No back pressure.
Thanks for watching and your comment. Yeah that would be a nice way to use it. Have a great day and be safe!
So that nice
@@ReneAlza-z8j thanks for watching and your comment!
Do you recommend me to buy this?
Thanks for watching and your comment. Yes, if you use a manual air chuck this will do that better and easier for you. I am glad I bought it and I think you will be too! Have a great day and be safe!
For the low low of $40.
Thanks for watching and your comment. I agree it’s not cheap, but at the same time Amazon and Ebay are full of cheaper options I’ve tried. Most are around $10 and I’ve been disappointed in each one I’ve used. This is $40 but actually works and we were not disappointed. Eventually Harbor Freight will have a copy but right now if you want something that actually works this is the best option IMO. Have a great day and be safe!
To damm Expensive for piece of Metal over Priced.
Thanks for watching and commenting. I agree they are expensive but I’ve spent more on the several less expensive ones I’ve tried that didn’t actually work. Soon Harbor Freight or someone will make a reasonable copy but there isn’t any yet that I could find. Have a great day and be safe!
Cry once and go ahead and buy it. You'll never have to buy another one.