วีดีโอ

Are those camso extreme duty tracks? I’m looking at adding some to my 773 bobcat. Looking for more float and even compaction while grading and in softer ground. What’s your experience been?

Wonderful video!!! Ty. You two Rock! We are looking at the oatmeal fabric on our two Rec Pro Recliners just like yours. Is this the fabric you got? How is it wearing?

The cylinder leaks more with the blade up because that is when the gland side is pressured

you should be able to pull the "notch" at the "tractor end" of the pto but the actual pto of the bushog pull it back and boom it slips onto the tractors pto... if that is how it is then do that and stop fixing something that aint broken.

I really appreciate your video. You (and the camera operator) did a fantastic job! You have a very nice shop in the background also. Thank you again, much appreciated my friend!

how do repair it

I found a nice box turtle crossing road. I didn’t want him to get hit by car so I took him home to my yard as it’s quite large with lots of food and places for him to eat and thrive. I was speaking with the park rangers and they told me that he probably will return to original location. I said it was about 5 miles and they said that’s nothing for a turtle! I was quite surprised. I named him Hubert none the less and he had bright orange arms and legs and neck. I am sure he will find a mate quickly and make little baby turtles!!

$99.99 on Wednesday, October 02, 2024. 1 day only.

Your PTO should have a shut off lever. Probably on the right side by the seat. Been 40 years since I ran a 1086 so I don't remember for sure.

Pretty normal to me, getting this set up to use. The next time you hook up it will take just a couple minutes. Some of those people dont know what they're talking about.

Great job

Thanks a lot for the video. It was so helpfull to me!

That dodgeball quote 😂

i upgraded the miter.

Nooooo! Don't wear gloves with a router!

Thanks for the video. I've owned the 650 for about 25 years and it still runs great. Always used ECHO oil and never had the carb worked on or changed the plug. Never replaced the filter but have blown it out with an air compressor. They just don't make them like this anymore. Great find!

Wife and I are building on some land in Fortville and I’m needing to build some ponds and move a bunch of topsoil and sand for turtle and tortoise enclosures… might hire you for some work….? I’ll hit you up on Facebook!

As someone who runs a rescue and rehabs a bunch of these guys every year….THANK YOU!!!!!

Okay, this is the third I’ve watched of you guys doing this. Well done! Glad to see so many retired IFD helping turtles!

All the ones here at our sanctuary have been on the hunt for the last worm of the season.

This is a fantastic eastern box turtle(Terrapenne carolina carolina! Amazing coloration.

Nice hat, I have a tan one

I bought three of the Bauer grinders on sale, two of the smaller 7 amp ones for like 13 bucks and the one you have for I think 24.99 or something. I like having one grinder with a paddle wheel, one with a cut off, and another with a regular grinding wheel. They have all done their job well, the smaller grinders you gotta take your time cutting through thick stuff but they ain’t bad. Great video you *almost* sold me on the herc.

Good to know these differences. The Bauer is almost half the price with current discount making it a great deal, but for the time being I'm happy with my $9 grinder as a hobbyist. :D

good video and job red dirt would have been better if you have any. take care, be safe and well

got the 40V and it's good enough for me but harbor freight said they might be discontinuing it. I got it for $64 because it was an open box but brand new. At first it worked great, then started to bog down until I realized that I had hit a cement block with the chain a few times and it just dulled it. I got my atlas 10 inch pole saw out and it worked great because it wasn't dull. I love these tools because I can use the same battery for both saws and a hedger and a weed eater, no more pulling on ropes and trying to get the damn thing started with all the smell and I love it that they are not super loud

Thanks for the review!

Most folks don’t realize that hydraulics is a black magic dark art type of thing and it almost always takes a certain amount of guesswork and trial and error to get stuff to work unless you’re a certified mechanic. I grew up on a ranch and I remember many times my father literally pulling his hair out because we couldn’t figure out what was wrong with a certain piece of equipment! 😂 it’s funny now but I assure you that was NOT the case at the time! Kudos for having the guts and fortitude to work through the problem on camera, all with your wife by your side, this is the pioneer spirit that made this country, god bless you and yours and good luck with your future endeavors! 🇺🇸🙏💪👊👍

GREAT JOB GETTING IT GOING. MICE HAVING GOOD HELPER. JESUS LOVES YOU ❤❤❤

Nice rescue and returning something to usefulness

Thank you sir

good video and job i have never seen a coolant filter. must have baking soda in it. i am sure they worked. we had cars and trucks we put texco anti freeze in and it eat the gaskets up. take care, be safe and well.

Do not use that hydraulic fluid in the trans, the tch that is is equivalent to the superceded fluid for case hytrans farm fluid. Case construction tch is different! The construction tch from a construction dealer is very expensive but it is the old school fluid and protects the organic clutches on these old machines. The farm dealer will tell you it mo longer exists but it does only thru case construction dealer and on the internet. The fluid is red like transmission fluid. I wouldnt bother spending the money to run it in the hydraulics but i would 100% run the right stuff in the transmission

You could just move your control levers around to release the pressure/vacuum from the cylinder

good video and job. i have the old$ 50 hft helmet it's much better than the old sears ones. i need to clean mine. if you do a lot of welding you need a good one. take care, be safe and well.

Guards are there for a reason

❤❤VIDEO ❤❤great info ❤nicely done demonstrating ❤❤

I replaces the nuts on my clamps with wing nuts. Much simpler to use.

Where did you get the cutting edge

thank you very much

I've had the same compressor for almost 20 years with no issues. There was a recall on them back in the mid 2000's so you might want to look into that. I don't remember what the recall was for, but I had to take it to a Sears service center and have them fix whatever it was.

That short dry start stuff kills water pump parts. That side hose fitting is for flushing With out Running!

good video and job must have been white oak takes forever for rootsto rot. take care, be safe and well.

Muchas gracias por el video, me ha sido de gran ayuda.

Ha ha ha you freaking people are delusional. How much do you people really hate this country I hope you all feel it.

Tohatsu outboards makes outboards for mercury 20hp and under and back in the day tohatsu made outboards for evanrude

Taryl Fix All channel took 10 gas lawn more engines. Tested different Gas stabilizers. He found If you crank, and run the engine every 30 days You don't need the stabilizer. He had two engines with just gas. He would let them set for 30 days then try to crank them. He had two engines with stabilizer gum up in the carbutrators has he says.

Real nice job

You all are a awesome couple, god bless you both .

Saw you on the Fbook post. Great idea! Will def be building this. Cheers.