When spraying it with silicone oil, is there a specific hole or port you're trying to spray into? Because according to the video, on mine, it doesn't look like there's a hole that leads to any of the internals there...
I've installed my Wraith X. I have the buffer tube and stock in prefect alignment, but when using my 12oz or 33oz co2 cartridge both leak where I screw in the 33oz. For some reason it's not getting a perfect seal. I did notice with the 12oz the cap will not screw complete down flesh with the buffer tube like it does when I don't have a co2 cartridge in... Please advise???
@srewolfairsoft1683 @BigSauce__ I have the same issue. Currently working with support but, when I unscrewed that nut I noticed a lot of dried/cracked residue that appeared to be locktite. I was able to clean most of it and replace with Teflon tape and it appears to have fixed it. I'm pending support to confirm if that makes sense or if I have a different underlying issue the tape masked
How can you tournament lock the regulator? The normal cat 5 has a receded band on the adjustment spot so you can put a zip tie around it. How does it work with the wraith X version? BC it seems like you can easily move a zip tie to uncover the adjustment spot with this version.
Is it possible to run the Wraith X with a T-adapter like the old Wraith Stock? So you can power it by a hpa tank with line and a empty CO2 cartrige inside?
@@christopherhayto1089 I use techt as well, but they mentioned using silicone oil spray so I actually just got some of the wd 40 silicone oil that is safe for rubber.
I was waiting for the part where you show us how to put the 13cl tank on 😁
Good job with the video Glenn ;)!
When spraying it with silicone oil, is there a specific hole or port you're trying to spray into? Because according to the video, on mine, it doesn't look like there's a hole that leads to any of the internals there...
Will this work on a tipperman
Love it! Will evike have stock?
Is there any way to know what pressure are we on ? D:
Nice vid :) Do you think its possible to install without problems on MTW Heretic Article 1 or i will need something specific?
I've installed my Wraith X. I have the buffer tube and stock in prefect alignment, but when using my 12oz or 33oz co2 cartridge both leak where I screw in the 33oz. For some reason it's not getting a perfect seal. I did notice with the 12oz the cap will not screw complete down flesh with the buffer tube like it does when I don't have a co2 cartridge in... Please advise???
Ever get this figured out?
@@SauceAirsoft nope just reinstalled my original hpa line
@srewolfairsoft1683
@BigSauce__
I have the same issue. Currently working with support but, when I unscrewed that nut I noticed a lot of dried/cracked residue that appeared to be locktite. I was able to clean most of it and replace with Teflon tape and it appears to have fixed it. I'm pending support to confirm if that makes sense or if I have a different underlying issue the tape masked
@@SauceAirsoft I replied to the other comment, not sure if it notified you
Would it fit on the mtw9?
I would image considering that the buffer tube is exactly the same, expect I'm not sure about the pdw stock...
How many shots do you typically get out of it
How can you tournament lock the regulator? The normal cat 5 has a receded band on the adjustment spot so you can put a zip tie around it. How does it work with the wraith X version? BC it seems like you can easily move a zip tie to uncover the adjustment spot with this version.
Tamper evident tape or sticker is most commonly used.
Is it possible to run the Wraith X with a T-adapter like the old Wraith Stock?
So you can power it by a hpa tank with line and a empty CO2 cartrige inside?
Hello, is it a Mil-spec thread ?
Is there a recommendation for a specific brand of lube?
Techt Gun Sav grease is best little pot goes long way i use i on gun and rebuilding regulators, and GT85 spray on electronics and none pressure parts
@@christopherhayto1089 I use techt as well, but they mentioned using silicone oil spray so I actually just got some of the wd 40 silicone oil that is safe for rubber.
So where does the CO2 go ?
Video linked in the description shows the ways you can configure it for 12g, 33g CO2, or HPA tank.
th-cam.com/video/tNHMw6Q6Ip4/w-d-xo.html
Did they stop producing the reaper m ?
I was wondering that too! ?
I would put a buffer tube pic adapter and a folding stock if I weren’t going the Wraith X route.