Simple and straight to the point video, good point of view camera showing every detail. I was having doubt that I machined my 80 percent correctly when I noticed my trigger assembly was going to prevent my safety to be installed, but I love how you pointed out, that it needs to be cooked. Thanks!
This is a great video, thank you for making it. I had to pause a few times and go back, but with the help of this, I was able to assemble my first lower. Thank you!
"It's so easy, even a child could do it... And they do." Excellent vid-- in less than 20 minutes you dispelled all the fear of putting an AR together. Much obliged! Subbed, btw
This is the best assembly video I have seen. Not rushed, detailed and not pushy. Excellent format and delivery. Do you have a similar video on the bolt assembly start to finish?
Great video for the first time builder to follow. I watched a lot of them to do research and found yours to be straight forward and not full of a lot useless talking. Thank you.
Great video. The only thing I see that needs some help is the magazine release button. You should take a punch or dowel rod and push the button in further where you can screw the mag catch on until the screw is flush with outer portion of button. At 5:38 you can see the rod is only into button about half way. Needs to go flush or just sub flush with button.
Whatever you do, don't install your trigger guard roll pin like the way it was done in this video. Make sure you support the back side of the trigger guard roll pin hole. Seen way too many people ruin their lower receivers doing it that way beating on it unsupported
Can you explain what you mean by supporting the backside of the trigger guard? Can you provide a video or photos of how that step should be properly executed?
To author of this video … So when I drop in my trigger and set the pin , there is no movement when I pull the trigger like the front bar on the trigger piece lies flat on the inside base of the lower and restricts movement . Did I mill my lower too deep ?
Bro, you made a solid video! Great pace and info as well as filming it all clearly! I just bought a RightToBeararms ANderson AR15 kit. Tomorrow I will use this video to assemble the lower and pop the already done upper on. THANKS FOR MAKING THIS (PS IT PISSES ME OFF WHEN I SEE MORE LIKES THAN SUBS. ON VIDEOS, COME ON PPL SUB AS WELL YOU PEABRAINS)
Great video man I been searching to find a video of someone with my exact gun so I could see how to put my arp back together, I lost my springs and a couple bolts , where did you order your kit ?
OMG the F-ING slide release roll pin was a nightmare, tore my brass hammer head all up I WAS ABOUT TO SAY WELL IM SCREWED, the pin went about .010 to deep and the release would not slide into position to be pinned in, my small punch literally bent into a wave and got stuck in the other hole trying to push it back. LOL I am a trained Machinist so I have hands on so not my first rodeo with tools. I finally got it flush then the nightmare of going all the way through began, I had to use a vise and finally just said F it and beat the hell out of it until it started to move and finally done! Sadly I marred it up some THE REST WAS A BREEZE FOR ME THANKS AGAIN I WATCHED AND FOLLOWED THE STEPS
The buffer tube castle nut needs to be torqued to 38 to 42 ft lbs and staked in two places. Also the buffer tube threads need aeroshell 64 grease on them. The torque values are wet.
I like this guys better. th-cam.com/video/4DQIR023-b4/w-d-xo.htmlsi=LsmXhaZ6SYDClZgq Also you can put a magnet on the first pivot pin to hold the detent. TH-cam channel “School of the American Rifle” is a great TH-cam channel that has regular content.
Im sorry to bother... but can you explain why the buffer catch/ spring and the other little spring after that are necessary. Could you explain their functions
When fired, the bolt pushes back into the buffer, the bolt has a ramp to depress the catch, when the bolt cycles back with help from the buffer, the catch comes back up and keeps the buffer in place.
@howtofirearm1549 thank you for your time, I heard you can run them without a catch/spring. Something about keeping forward pressure on the bolt at all times...
By far the best video I've found that shows the parts UP CLOSE. Every one else's videos were giving me a headache lmao.
This.
Dude, for realz! Thank you!
Simple and straight to the point video, good point of view camera showing every detail. I was having doubt that I machined my 80 percent correctly when I noticed my trigger assembly was going to prevent my safety to be installed, but I love how you pointed out, that it needs to be cooked. Thanks!
This is a great video, thank you for making it. I had to pause a few times and go back, but with the help of this, I was able to assemble my first lower. Thank you!
"It's so easy, even a child could do it... And they do."
Excellent vid-- in less than 20 minutes you dispelled all the fear of putting an AR together. Much obliged!
Subbed, btw
This is the best assembly video I have seen. Not rushed, detailed and not pushy. Excellent format and delivery. Do you have a similar video on the bolt assembly start to finish?
Thanks. Yes the 3rd video. BCG (Bolt Carrier Group)
Great video for the first time builder to follow. I watched a lot of them to do research and found yours to be straight forward and not full of a lot useless talking. Thank you.
bro just built a ar in 20 minutes
No directions came with kit so I enjoyed this video it was very helpful
Where can you order the kit ?
How can i get a kit man Do I need license or something ?
Finished my first build today. Thank you for the informative video!
Hey man how can i get the kits to build my Own arp ? I need license For that ?
@@bigwolf6966no you don’t
I was reluctant to actually buy the kit until i watched this video! THANK YOU!
Do they sell bottom kits already built?
Thank you for sharing a simple to understand and follow instructional tutorial
Very well done bro, the perspective is perfect. Thanks
Great video! Made my first build very easy.
This is the best video to use compared to all the others
Thanks bro. This was nite and day compared to working on my CZ trigger springs kit and sear cage.
Great video. The only thing I see that needs some help is the magazine release button. You should take a punch or dowel rod and push the button in further where you can screw the mag catch on until the screw is flush with outer portion of button. At 5:38 you can see the rod is only into button about half way. Needs to go flush or just sub flush with button.
From salsa to Zelda music . Thanks for the video brother
Best video!!! Super descriptive and gave great tips while doing it!
excellent video. Just did my first build using this video. Came out great. Thanks for information
Short and to the point. Thanks.
Outstanding video. Very informative and helpful. I just ordered my ar kit and cant wait to build it!
Great Video, straightforward.
Sir you made it look very easy 😊
Thanks 😊
Man thank you so much!! This is a great video you were patient and very informative.
Whatever you do, don't install your trigger guard roll pin like the way it was done in this video. Make sure you support the back side of the trigger guard roll pin hole. Seen way too many people ruin their lower receivers doing it that way beating on it unsupported
Agreed. This was not ideal.
Can you explain what you mean by supporting the backside of the trigger guard? Can you provide a video or photos of how that step should be properly executed?
At what point of the video
Berry gud video brother 👍
Great video. I downloaded it for future reference as it may not be here tomorrow or the next day depending on YT's policies on gun stuff.
Straight to the point 💯
I really enjoyed this. Thanks man.
Bro thank you so much your video is so helpful it help me alot and i got same lower reciver
Great video
To author of this video …
So when I drop in my trigger and set the pin , there is no movement when I pull the trigger like the front bar on the trigger piece lies flat on the inside base of the lower and restricts movement .
Did I mill my lower too deep ?
Good video.
Detailed explanation. Thanks man.
Outstanding hoss
absolutely great video. Thanks so much for posting it.
Great video. Thank you for sharing
Bro, you made a solid video! Great pace and info as well as filming it all clearly!
I just bought a RightToBeararms ANderson AR15 kit. Tomorrow I will use this video to assemble the lower and pop the already done upper on. THANKS FOR MAKING THIS
(PS IT PISSES ME OFF WHEN I SEE MORE LIKES THAN SUBS. ON VIDEOS, COME ON PPL SUB AS WELL YOU PEABRAINS)
Sweet good job bro
Thanks man! SUB! And saved video incase u want a good walk through for a future build ...I'm working on an AR 10 now 😅
Great video man I been searching to find a video of someone with my exact gun so I could see how to put my arp back together, I lost my springs and a couple bolts , where did you order your kit ?
PSA
Shouldn't you put some lubricant on the parts you installed?
I just used a piece of paper to keep the pivot pin detent down while I pushed the pin in.
Great video man what upper is that?
Thanks! It's a PSA
OMG the F-ING slide release roll pin was a nightmare, tore my brass hammer head all up
I WAS ABOUT TO SAY WELL IM SCREWED, the pin went about .010 to deep and the release would not slide into position to be pinned in, my small punch literally bent into a wave and got stuck in the other hole trying to push it back. LOL
I am a trained Machinist so I have hands on so not my first rodeo with tools. I finally got it flush then the nightmare of going all the way through began, I had to use a vise and finally just said F it and beat the hell out of it until it started to move and finally done! Sadly I marred it up some
THE REST WAS A BREEZE FOR ME
THANKS AGAIN I WATCHED AND FOLLOWED THE STEPS
Yeah that roll pin sucks
@howtofirearm1549 some scotch bright pad and elbow grease and 90 % of the Mars are gone. That was a pleasant surprise
Great video!
What are some real websites to get the parts
Where can you pick up those pin helpers on the key ring?
I got mine at academy sports. Probably any outdoor retailer that carries firearms.
What’s websites are good for guns parts?
Any reasonable kits out there for ar15
Does it come with the blue toe 😅😅
The buffer tube castle nut needs to be torqued to 38 to 42 ft lbs and staked in two places. Also the buffer tube threads need aeroshell 64 grease on them. The torque values are wet.
Do you have a link for the trigger you put in?
www.opticsplanet.com/trybe-defense-v2-single-stage-ar-15-curved-drop-in-trigger.html Mine was a V1
Thank you!
Thank you! GBA 🇺🇸🇺🇸🇺🇸🇺🇸
thanks dude!!
Many detents have been lost during the making of these products. It’s a source of sadness to this day.
I just built a gun with you! Thanks
5:37 nope.
tuff
bruh i got the same allen wrench as u lol
I like this guys better. th-cam.com/video/4DQIR023-b4/w-d-xo.htmlsi=LsmXhaZ6SYDClZgq
Also you can put a magnet on the first pivot pin to hold the detent.
TH-cam channel “School of the American Rifle” is a great TH-cam channel that has regular content.
Straight
I love you no gay shit
Im sorry to bother... but can you explain why the buffer catch/ spring and the other little spring after that are necessary. Could you explain their functions
When fired, the bolt pushes back into the buffer, the bolt has a ramp to depress the catch, when the bolt cycles back with help from the buffer, the catch comes back up and keeps the buffer in place.
@howtofirearm1549 thank you for your time, I heard you can run them without a catch/spring. Something about keeping forward pressure on the bolt at all times...
@@howtofirearm1549 I'm guessing running without one could cause excessive wear on the buffer?
@@Lucas-n9t7u I would not recommend
Great video
Great video!