What Tools are NEEDED for a Homeowner? Most common tools around the house
ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2024
- Todays "Tool Talk" is in response to a question asked.. That Question was given by Zac, "Can you make a video or list on Tools you recommend for a Homeowner?"
In this video I look at "Homeowner" as someone who just purchased a house, has zero tools, and wants to know what they will need to do most tasks. Tool sets are built over the years as needed for jobs, but I try to give a list of tools that I feel anyone would need no matter what.
Everyone's budget is different but I tried to give options for prices that are not real expensive, but also decent quality. I always say buy the best quality you can afford.
Let me know what you think or what I have missing from your list. If you have any tips, suggestions, or questions... let me know in the comments and THANKS FOR WATCHING!
The following marked (Affiliate Link) are Amazon Affiliate Links for items shown in the video. I make a small commission if you make a purchase through following these links. Thanks for supporting the channel!
If you would like a link for something you see in the video, just let me know and I will post them here. (I have specific videos with many of the products you will see in the video as well)
Husky Tool Bag (Home Depot Non Affiliate Link) - www.homedepot.com/p/Husky-10-...
ToughBuilt Tool Bag (Affiliate Link) - amzn.to/3gYZeVG
Ryobi 18V Drill/Impact Set (Home Depot Non-Affiliate Link) - www.homedepot.com/p/RYOBI-ONE...
Bosch 12V Drill/Impact Set (Affiliate Link) - amzn.to/3B4GtqE
Milwaukee 12V Drill/Impact Set (Home Depot Non Affiliate Link) - www.homedepot.com/p/M12-FUEL-...
Klein Dedicated Screwdrivers (Affiliate Link) - amzn.to/3XRymY8
Klein 14-1 Adjustable Screwdriver (Affiliate Link) - amzn.to/3FoRxS6
(You can also see a Review for this tool here - • Klein Tools Multi-Bit ... )
Klein 11-1 Screwdriver (Affiliate Link) - amzn.to/3gTCu9o
Kobalt Mini Screwdriver Set (Lowes Non Affiliate Link) - www.lowes.com/pd/Kobalt-10pc-...
Klein Mini Screwdriver (Affiliate Link) - amzn.to/3VsC8FT
Klein Screwdriver Set not Shown... but a good value (Affiliate Link) - amzn.to/3H82Xe6
Irwin Tongue & Groove Pliers (Affiliate Link) - amzn.to/3VJqPsy
Channellock Pliers (Affiliate Link) - amzn.to/3B6dy5l
TIME STAMPS:
00:00 Intro
05:35 Tool Bags
08:10 Drill or Impact
11:20 Screwdrivers
14:29 Tongue & Groove Pliers
16:32 Adjustable Wrench
19:09 Flashlight
21:26 Hammer
22:36 Utility Knife
24:57 Level
27:21 Tape Measure
30:17 Stud Finder
32:48 Cutter
34:35 NCV
37:03 Honorable Mentions
42:23 Outro
#milwaukee #irwin #channellock #crafstman #toughbuilt #homeowner #ryobi #bosch #makita #knipex #kleintools
Knipex Cobras 7 1/4" (Affiliate Link) - amzn.to/3VQRHXL
( See Why I Like Cobras the Best Here - • Knipex Cobras - MY #1 ... )
Milwaukee Tongue & Groove Pliers (Home Depot Non Affiliate Link) - www.homedepot.com/p/Milwaukee...
Irwin Adjustable Wrench (Affiliate Link) - amzn.to/3uiqNMH
Milwaukee Adjustable Wrench (These are my Favorite) (Affiliate Link) - amzn.to/3XVzqKs
Olight I3T Flashlight (Affiliate Link) - amzn.to/3gS7NSb
Milwaukee Flashlight (Price Has Went Up) (Home Depo Non Affiliate Link) - www.homedepot.com/p/Milwaukee...
Stanley Hammer (Home Depot Non Affiliate Link) -www.homedepot.com/p/Stanley-1...
Irwin Hammer (Affiliate Link) - amzn.to/3PbGGhH
Stanley FatMax (Home Depot Non Affiliate Link) - www.homedepot.com/p/Stanley-2...
Fast Cap Tape Measure (Affiliate Link) - amzn.to/3gPEShD
Craftsman 9" Level (Affiliate Link) - amzn.to/3UlRmes
Craftsman 24" Level (Affiliate Link) - amzn.to/3Vu4XBB
Empire 9" Level (Affiliate Link) - amzn.to/3Utg3pd
Magnetic Stud finder (Affiliate Link) - amzn.to/3VPqiWe
Franklin Sensor Stud Finder (Affiliate Link) - amzn.to/3H64rp6
Irwin 8" Diagonal Cutters (Affiliate Link) - amzn.to/3gYt0K3
Knipex 8" Diagonal Cutters (Affiliate Link) - amzn.to/3UmmP00
Olfa Utility Knife (Affiliate Link) - amzn.to/3XNj5Yx
Milwaukee Fastback (Home Depot Non Affiliate Link) - www.homedepot.com/p/Milwaukee...
Kaiweets ST100 (Affiliate Link) - amzn.to/3P3Cv7u
( You Can See my Review Here - • KAIWEETS ST120 & ST100... ) - แนวปฏิบัติและการใช้ชีวิต
Good list! I would add 5 gallon bucket, multi painters tool. Gorilla ladder, mini shop vacuum
All great additions… The ole 5 gallon bucket is pretty Versatile. All those things are extremely helpful… Thanks for helping with suggestions 👍
I got all that you added and then some
Impact drill all day over the regular drill if I had to choose just one.
I keep a 6 in 1 screwdriver, pair of channel lock pliers and a multimeter in my kitchen Drawer at home, can almost do anything with that 😊. If I can’t fix it with that I’ll go grab one of my four veto tool bags 😆
Thanks for the videos!
Yeah that’s why it was hard for me to make this list… it hard to think “what tools would I need” when I have so many options. It’s harder for me to think about what tools I “could” give up than what tools I need. I like them all so much 😂
You are right though… can get a lot done with a multi screwdriver and a pair of channellocks.
@@MORGANSMaintenance
have you tried CH Hanson 03040 Magnetic Stud Finder? To me the best there is. Super strong rare earth magnet. No doubt when you find the stud. You can also feel the metal studs using it then you find the screw on the metal stud and you know you are on it. Found it at my local sears before they closed. Amazon has them now.
@@DanO181919 i haven’t… I have seen it in a lot of Load Out videos though. I see Home Depot has it, I may check it out next time I’m in there.
Thanks for suggestion.
Regular drill for me.
This video should have gone viral. It is the best narrated and articulated, complete list of tools a homeowner needs. For me, the pry bar, needle nose pliers and putty knife were super important. Great list, and great quality video and audio. I'm a new subscriber, keep it up. I love the southern accent too, where are you from? As a female viewer and homeowner, this video is gold. I have everything on the list, bought over time, but I wish you posted this much sooner. This is going to help a lot of people.
Appreciate that 👍👍
Building tools over time for your specific needs is the way to go. I am from Kentucky… my accent is for some, and for some it is not 😂
Thanks again.
If you are on a project, like a deck or whatever, where you are driving screws all morning, or all afternoon, perhaps an impact is the better choice. But for the guy whose project will be a few screws over the next half hour then the clutch on the drill/driver is the preferred choice. All you have to do is over-torque a few fasteners to realize that the extra power from the impact is not always beneficial.
Very true. You have to be careful not to have a heavy trigger finger with an impact. I would have always chose a impact in the past for power…. But drills now are getting to be pretty powerful. Then you add in the clutch, and the noise factor….it becomes a harder decision.
Glad they typically sell them in kits so I don’t have to choose one 😂
Thanks so much for your thoughts. Very helpful.
I agree. I'm def an impact guy, but I've gone to the drill more and more over the past couple years.
Great video! I love when people share what they do because it gives me ideas. As for drill vs impact, I have gone back and forth over the years but if I could only have one I would choose the drill but really I just have both.
Also, love your workbench. Looks awesome! Keep up the good work!
Thanks. I got those file cabinets for free so I didn’t get to pick the color…
Yeah you usually can get both as a kit deal for very little more than the price of one. Why choose… just buy both 😂
Liking your channel as well 👍
That work bunch is really nice 🙂 I used to have one like that years and years ago now I live in a condo so I don't have room for things like that
I spent a ton on a mini flashlight and it’s one of my best purchases. It’s the Olight Baton3. It’s nearly perfect. Stores in a charging case so you never have to worry about it being out of power. It has a double clip so it’ll clip onto a hat for a head lamp. It has a magnetic tail cap. And it is super bright. Up to 1200 lumens. I use the thing constantly.
I appreciate the suggestion. I like light with a magnetic tail cap. I may need to check into that for times when I need more lumens
Thanks for the suggestion 👍
For a homeowner, stay organized. Buy a cheap socket set in place of crescent wrenches. U can use em on your car and everything else. Crescent wrench is great if u just want to own like five to ten tools but just buy a cheap set if it’s money. A homeowner has space to store more tools
Nice video; good ideas.
A few I'd add:
1. a roll of electrical tape. Necessary for frayed cords if nothing else, but every homeowner WILL experience frayed or similarly damaged cords.
2. a ball of sturdy string, if only for temporary fixes until a permanent repair can be made.
3. an expanding magnetic pickup, for dropped screws, washers, or similar bits.
4. zip ties in various sizes. These will be useful for temporary repairs, and some permanent ones (like running wire along a pipe or post). Call it an honorable mention if not a "tool" in the sense you mean.
Regarding screwdrivers, as convenient as multi-bit screwdrivers are (I have one in every tool bag), the bit-holders typically will not fit in the recessed holes found on many appliances and some fittings, so you should definitely have some single-use screwdrivers that can fit in these holes. Similarly, though it lacks leverage for general use, there are some places where you'll need a stubby to fit.
On the drill vs. impact, if you're getting just one, get the drill. An impact driver will destroy some fasteners or the work pieces, whereas a drill (with clutch) will not.
Regarding flashlights, consider a headlamp, as it keeps both hands free.
If you can remember to do routine maintenance, I highly recommend rechargeable flashlights or their batteries; they won't leak, unlike even better alkaline cells (particularly those made in Dragon Country, even if a name brand).
Good suggestions.. appreciate it 👍
Great list!!
I would make sure to have a #3 Phillips- makes life easier when assembling furniture with knock-down fasteners.
A lantern-style flashlight, I think is a must for when the power goes out.
I like aluminum body string levels for hanging pictures.
More importantly, I think everyone needs a holiday survival kit. Whether birthdays, Christmas, or any gift giving. It should include - #1 & #2 Phillips, 1/8 & 3/16 flathead, wire cutters, utility knife, and a half dozen AAA & AA batteries.
Great Additions… appreciate it 👍
I'd choose impact over drill, but I use the Milwaukee Installation Driver as my main since it has the quick collet and clutch settings and more 👍
It’s been my “go to” for a lot of my work too. I really like it. I’d choose my Surge over the drill if I could only have one.
Thanks buddy 👍
The Installation driver is perfect for someone who is only doing light-moderate work (Dewalt also has a similar product). For anyone potentially doing more serious work, an 18v drill/driver set is worthwhile. The impact can do most things, but there’s still a lot of drill bits that aren’t impact-rated. The noise of an impact is sometimes a downside as well (love the fuel surge, but it’s pricey for a basic homeowner kit).
@@FreedomFox1 Yeah I love the Installation Driver. Probably my most used tool.
Mr Morgan I really appreciate you taking your time to make these videos. They are very interesting & I have learned a good bit from you. Sincerely Larry Croft
You are welcome. Thank you for taking the time to watch and giving me feedback. Always good to know if what you do is helpful 👍
Very practical list. No unneeded overpriced boutique stuff.
I’d only add a painters tool.
Good advice on waiting till you really bump into needing something before purchasing. I’ve got a lot of stuff that was prematurely purchased that just sits on the shelf.
Yeah a good set of staples is really all you should buy up front… then add as needed to find out what you personally really will need with the types of jobs you tackle.
I never rent tools as a professional because I will end up using them enough (unless it’s a really expensive, use once in a year tool), but as a homeowner it’s a pretty good idea.
Then spend your money and buy good tools of the ones you will use.
A painters tool is a good tool 👍👍
@@MORGANSMaintenance In a moment of frivolity, I bought a copy of your sign on Amazon; "Money Cant Buy Happiness But It Can Buy Tools..."
Good idea. I'm 80 DIY. I never throw however away. I use lots of double sided storage boxes. Sort out washers, screws, Bolts. Etc. You'll use it more than you think. Just add tools as you need. For me impact over drill. Use more multi functional tools, 21 N 1 screwdrivers, and sockets to cut down on space. Look at Tough Built tool cases. My wife won't let me go to Lowes tool dept alone anymore. 🤣
😂😂.. I have to sneak in the tool stores between jobs. We never go while we are in town together
I appreciate you putting out this video. Good stuff! 👍🏻
Thanks, I appreciated that 👍
Great channel, great video.Thank you !
Appreciate that my friend 👍
I love how neatly your workshop is!
I try to keep it that way… I appreciate it 👍
Love these videos I’m just starting to build my kit up. Thx👍
It takes time…. But it’s a fun journey.
Appreciate the compliment and feedback. 👍
Awesome video, couldn't agree more with anything you said. I've been doing woodwork as a hobby and machining as a job for years now, and I can't fault anything you said. I came to this video to double check I hadn't forgotten anything for a friend who is a first time house owner and wanted to know what he needed as a first set. Was also thinking of adding a cheap set of calipers, but not sure if that is too much though
It will all be a little different for every homeowner because some will try to do more things than others.
A tool collection is a Journey. Start with the basics and add as you need them for the jobs you are willing to take on.
That’s how I got many of my tools. If I could by the materials and tools for cheaper than paying someone to do something.. that’s what I do. Then I have that tool for anything else that comes up.
A set of calipers will be handy for several people 👍
I prefer a drill over an impact. The clutch allows you to drive until it’s just right when you get the right setting. If I used an impact I would either add an impact clutch, which I don’t know how well they perform, or use it and stop right before the screw gets fully in to finish with a screwdriver, otherwise I believe I would mess things up more often than not.
It is nice to have a clutch depending on what work your ate doing.
Some of the newer impacts do have some speed/power settings which makes them a little more adjustable than they used to be. Used to just be all or nothing 😂
We'll I lost the bet. My wife said I had everything listed when I started watching and she was right including honorable mention and side tangents lol. Good list.
You should have told me a tool you were wanting and I could have added it as a “Must Have” 😂
@@MORGANSMaintenance lol I said the same thing earlier hahaha. Next time. She'll have to come up with something for Christmas.
@@steveaukes4770 you need me to make a tools to get Steve for Christmas video 😂
Awesome list mate, you gave me a couple of ideas, cheers!
Thanks. I appreciate you watching and taking the time to comment. I hope you like whatever tools you decide to get 👍
Fantastic video. I cross referenced the items with "project farm's channel" and more or less just stuck to buying everything Klein. (I tried to use as many of your links as possible) very much appreciate the video. I would add a folding allen key set, and a really nice pair of scissors.
Thank You… it was hard to narrow it down because I’m my mind I would definitely need more tools.
Both your suggestions are great… will for sure need some Allen Keys to put together some things 👍.
Appreciate you watching and your support!
Great video Morgan 👌 you forgot to mention one type of stud finder every man needs. A good woman. It would have been a great introduction to Miss Morgan. Merry Christmas and a happy new year to you and your family. ☃️🎄
😂… very true but I think her calibration is off.
Merry Christmas and Happy New Year to you and yours as well 👍
I am a renter in an apartment. I used just about all in your list, even as a renter. Some say add a shop vac, yup got one. Some say add a ladder, nope didn't get one yet, a chair does me fine. I love that you added a flashlight, when I started out 30+ years ago, I never thought of that, but I got some now. As a must have I would add a first aid kit for boo boo's, every one going to get a boo boo, so . .
For me as an honorable mention I add some kind of quality multi tool pliers. I have many that cost alot like the Leatherman's and so on, but like a Bibury or a SOG would be great too. I find I reach for it a lot just so I don't have to dig out my tools. It good for when I notice a screw out on a wall plate, cutting open my mail orders whether envelope or box, I used it tighten cabnet screws, get stuff out of the clogged vacuum hose, and more. I also carry and use at work for various things too. The reason for me having expesive multi tool is that on cheaper multi tool I am affraid to cam out with ther screw drivers that I have done with cheaper ones. So I have learned to like multi tools with 1/4 hex adapter to get qualilty bits and a varity of bits too, to extend the use of my multi tool. Learning to use a multi tool like Leatherman's or Gerber or other name brand is differnt than a normal tool. Some times I find the tool implement have reach challanges. Other times, like resently, adjusting a vent deflector, the flat head reached but it also slightly flexed, so maybe next time a normal flat head screw driver.
Thanks for the suggestions..
Tool selection will be different for everyone depending on what they are comfortable tackling… but a good multi-tool does save space in a bag and cost for multiple tools.
Like you said, sometimes it won’t work as well as the individual tools… but often they work just fine. I used to carry one all the time.
Thanks for your suggestions and thoughts 👍
Love the Knipex cobras.
They are really great. It’s not all hype, they perform really well.
This is a real good set up
Thanks 👍
Lotta great ideas here. For dealing with intruders, I always recommend a cordless hole punch.
😂… I have one that punches a bunch of holes at one time
@@MORGANSMaintenance😂
Utility Meat Scissors. I use mine every day.
Great add… Good pair of scissors can be helpful.. thanks 👍
The Milwaukee backpack is about $130 and is built nice with a good amount of storage to Easley move around with
Several people like those 👍
Thanks for the suggestion
I have a veto for work but CLC makes some decent bags for home use. CLC 1509 is my favorite for my home
I used to have a Dewalt Backpack that was basically a CLC branded Dewalt. It wasn’t bad.
Thanks for the suggestion 👍
Impact. Not drill. If on a budget. Even the v12 Milwaukee has settings smoother brands too. Get any brand. But honesty they’re almost always sold on sale as a pack
@@donotrobme9295 yeah the settings on impacts have made them nice… and you are right, typically you get a better deal on batteries/drill/impact combo
Serious question. Why do most people seem to prefer non-self locking tape measures? I can’t live without a self locking tape. Love the look of the green tape.
For me, it’s not that I don’t like them or do… it’s just not a dealbreaker feature for me. I might prefer it, but it has to be on a good tape.
I do like either having auto lock or the place to put my finger like the Milwaukee ones have.
The self locking ones always break on guys on my team, we go through tons of them
@@narutobroken I haven’t used one much lately… but I just got a newer one to try out. Give it a go and see.
I switched to a compact impact driver. And I’m a fan. I have a corded drill in case I need more power, but for most jobs, I just grab the driver.
Yeah I prefer the compact 12v tools over the larger versions for most work. Although the higher voltage tools keep getting smaller and smaller.
You definitely need a Martinez titanium handle steel head hammer. But probably better to wait until interest rates come down. 😁
That would eat up a lot of the entry level tool budget 😂
great video. best for me would be a drill with detachable heads and the M12 surge.
👍👍… those are my main two tools
It is good to have both as far as a drill and impact are concerned they can be back ups to each other if either or fails to work properly.
I like having both myself too 👍
Impact 👍
Me too, but I do use my drill more than I used to for fasteners. Mostly when I need to be quiet.
Thanks for sharing 👍
Now that Milwaukee 18v has a stacked lithium style battery like Dewalt 20v Powerstack battery i recommend for the home gamer getting a compact version 18v / 20v impact driver BUT buy the stack lithium smallest size. You now get the advantage of lighter weight of a 12v line but much wider breadth of tool availability in Milwaukee 18v or Dewalt 20v. Great vid!
👍👍… all the tools keep getting smaller and smaller. It’s true, my M18 Surge is the same size tool as the M12… the battery size is the only difference
Oscillating tool is definitely the right cutting tool for most people. Super versatile, and more importantly super safe. They'll cut a 2x4 but not your skin.
I did not know they won’t cut your skin.. like a Saw Stop, I’ll take your word.. I’m not testing it out 😂
I’ve put the blade of one on my hand a few times of curiosity. But never pressed one it or tested much fate. But the little I did it didn’t cut.
Though it shouldn’t. It’s the same type of saw in hospitals an what not that they cut cast off with for that same reason of not or unlikely to cut the skin under
@@AquaTech225 👍
You don;t have to explain yourself. You do what you do and you film when you film. Full stop. In terms of content quality sometimes less is more.
So an average homeowner needs just one tool - a handyman father.
Very good and informative video.
All the wives of the world would thank you dearly. When an average husband sees that video he would immediately come to conclusion that it's 10x cheaper to hire a specialist than to buy ALL of these tools.
Hey I got this comment and a notification 🎉
I had to laugh out load at the Handyman Father… because it’s very true. I told both sons many times, “you would be wise to watch me do this so you don’t have to pay someone to do it later, because I’m not doing everything at your houses”… and yet I’m not holding up my end of the threat 😂
He has done some things with those tools I gave him though that I am pretty surprised he has tried on his own.
Yeah that what most people don’t understand why work isn’t cheap… it not only takes skill and experience…. But tools that aren’t cheap.
@@MORGANSMaintenance So your son knows this Polish adage: "Why would you carry timber back to the woods" (carry coals to Newcastle is its English counterpart).
@@Stefan_Kawalec 😂 Many people know it well.
@@MORGANSMaintenance I still don't understand youtube comment rules.
I have a name for organisers with chaotic assortment of things or organizers that opened accidentally. It's cinderella.
Great video. I'm sponsoring a young Afghan refugee woman. Now that she's got the ground beneath her feet (Job, apartment, car), I want to have a tool talk with my newly independent young woman. As a homeowner of many years, I think I know what she needs, but saw this and it was helpful. I guess if I were to add anything it might be WD40 or 3-in-one oil. Thanks for the video!
That’s great. It’s always nice when you can pass on things to someone that will help them the rest of their life 👍
I agree with what you said about 18v vs 12v. Since most weight is much less of an issue for homeowners than it would be for someone going home to home and they will likely end up building something I see little reason to get a 12 volt at all for most homeowners
👍
Love the list! I’m on team impact. The drill is more versatile but I’m still going to grab the impact 30x more than the drill.
I’d add in a casserole dish and a 12 pack of beer though. Make friends with your neighbors who have the tools you need 🤣
Appreciate it… and that’s the best idea I’ve heard yet 👍
Do u have link to product u showed before to make portable trashcan and bags for it? Or a link to that video you made, thank u, big fan.
@@Alex300zxTT it’s the Kwickan and Durasack Bags
They are in my top of 2023 video
th-cam.com/video/VCxedQ6FcvY/w-d-xo.html
I also have just a Kwickan video -
th-cam.com/video/_a54oeykIkg/w-d-xo.html
The bags are on Amazon - amzn.to/3LgXJxu (but they are currently showing unavailable as I post this link)
The Larger Kwickan you can get on Amazon or Home Depot, but it goes in/out of stock on Amazon also. The smaller one I only found on Home Depot’s website.
If I could only have one it would be an impact.
I use one more often, but drills are getting stronger and are quieter…
If I picked which one I use more though, it would be an impact.
Thanks for sharing 👍
Great video! I would add a 4ft or 6ft ladder to the list as well as a mini shop vac a as and last is vice grips or some type of squeeze clamps. Awesome suggestions in your video and perfect for tool beginners!
Thanks… I thought of a ladder after filming.
All those are great suggestions to add to the list. Thanks 👍
I’ve got a Wera Kompact with the bits in the handle and telescoping blade. And it comes completely out so I use it as an adapter in my impact driver.
I've used my tape measures at least 30 times more than all my other tools combined. Fairly, I haven't done many projects yet, but measures are stupidly important, even if you don't own a home. Checking dimensions for size and fit, estimating project costs or materials, clothing sizing, hanging decor or arranging furniture, gardening...it's nuts how often I reach for one. In fact, I gotta get another one so that I have one in the garage.
I would suggest a rolling one, too, so you can more quickly measure larger spaces. In fact, I think a 6' or 9' tape would be better than the 25', along with a rolling measure. It is just more portable and easier to use for 90% of your measures. It's much nicer to have a lighter measure for tasks, and to just roll if you need to measure over 10 feet instead of fight with a super long and unwieldy tape. Best way to get a rough estimate of a room or measuring stuff outdoors like flower beds. I found mine for 20$. It's cheap and can be less precise than a tape, but it's super versatile and easier to use. Fantastic for quick estimates of spaces. No matter how big.
Imo, you need a roller, a 6-9' basic go-to, a small ropey/fabric/flexible one, a sturdy 25' one like the typical Dewalt or stanley for "serious" measuring, and then a laser measuring tool when you can afford it lol if you can afford a laser easy enough you could probabily prioritize that before a roller or even a 25'. a yard stick and/or triangles can be really good to have, too, if you'll do more serious projects like carpentry or sewing.
You practically need a measure before you need a Phillips! It's super easy to underestimate how useful they are. You can find other options in a pinch for most basic tools. But you can't really get around needing a reliable way to measure things.
Also, thank you for recommending a saw. I've been trying to decide what my first power cutter should be, and I think I'll trust your experience and go with an oscillating tool first. I was leaning towards a circle saw, but I think I need versatility and precision more than the strong cuts of a circle right now. Thank you!
You are welcome and great suggestions on measuring… Very True that a tape measure is really valuable 👍
Stanley Fatmax is always my go to but would love to know what you think about the fastcap. Been thinking of picking one up myself
I ordered the 16’ but they sent me the 25’. It has some nice features for $8. I’m not sure the tape will hold up in a framing environment but it the left/right blade is pretty neat.
I just got it, so It will take some time for the job site durability test but for around the garage and house it is definitely worth the $8
What's your opinion regarding essential hardware (screws, bolts, nails, drywall anchors, electrical connectors, etc.) that DIY'ers and/or homeowners should have with them, and what sizes and types would you recommend?
I keep a tool bag organized with tools, and other items that I would consider my "95%" bag because it often does a large majority of repairs, installs, etc. needed around the house, as well as to help family and friends with their projects when I go to their place (such as wall mounting a TV). However, one area where I'd say my bag is currently lacking is hardware. I have some interior screws, some drywall anchors, Wago's, and a few other items, but I'd like to narrow it down to just "essentials", and specific sizes of screws, bolts, etc.,types of them that likely do a wide range of fixes and fastening, and a certain amount of them (just enough to get a job done, but would need restocking afterwards). The goal is to fit the hardware in a relatively compact container that can either be carried in the bag, or in a Milwaukee slim Packout container, but still be relatively light and easily portable. Maybe this is another video idea! Thank you!
That’s a great idea… It’s a hard one to narrow down because someone will run into various things others will not.
I normally keep all mine in Packouts/Milwaukee Organizers and keep an empty organizer that I then pull bins from my bulk and put them into the empty and build a set of hardware for the job.
I will ponder on that question and screenshot your comment as something to be thinking about.
Thanks for the suggestion 👍
@@MORGANSMaintenance Thank you! I truly appreciate it. It really is a challenging subject because like you mentioned, they is a plethora of possibility and that makes it difficult to narrow down the essential materials.
Digital tape measure for long distances and ball end allens for those odd bathroom fixtures.
👍👍. Both good things to have
On stud finder, I like the CH Hansen magnetic one. Has a level to make sure that it is pointing straight down. The level can be rotated 90 degrees so you can use the stud finder as a mini level. Handy for hanging pictures. Hadn't had much luck with electronic stud finders but that Franklin one looks intriguing.
On screwdrivers, I really don't like the ones where the bits have a ball bearing for retention. Had those drop out of the screwdriver or get loose inside the handle and rattle around. I go for the ones with a magnetic bit holder, with onboard bit storage or not (will use a bit holder clipped to my bag in that case).
On tape measures, I like ones that are double sided and display fractions. Though, most I find that display fractions only do it on one side. I am trying out the Toughbuilt Pro Blade tape measure. It has the fractions on both sides and a magnetic hook. So far, I like it.
Yeah you are the second person to recommend the CH Hanson and so see that in many Loadouts.
I like different screwdrivers in different situations… mostly depends on how often I am needing to swap. If it’s often I prefer dedicated over bits. It’s faster for me to have several in a pouch that pull bits in/out.
I’m going to try a ToughBuilt tape too I think. I’m going to try the FastCap and FatMax out now then also maybe get the Klein and ToughBuilt people suggested. I also prefer double sided and fractions… fractions aren’t a must, but I prefer it over not having it.
Thanks for your thoughts 👍
And yeah the Franklin Sensor is not even close to being the same thing as any other electronic stud Finder I’ve used
@@MORGANSMaintenance Agreed on the screwdrivers. For my electrical bag, I have dedicated screwdrivers. I don't want to be changing out bits all the time while installing switches or outlets. For my other bags, I go with multibit screwdrivers.
@@gpraceman same here… great minds think alike 😂
This was great. . Thanks!
Appreciate it. Thank you for watching, you did a great job too 👍
You know it’s funny when I was young the stud finder was your knuckle knocking on the wall. You could use the hammer handle if you were careful. You just listen you can find the stud’s.
Some people can do it that way, but not most people. I’ve seen some people get it every time, but I also watched a cabinet guy do it and I bet he had a 10” line of screw holes before hitting a stud 😂
Sometimes you can’t afford to miss because it means you may have to spend the time patching, painting etc…Sometimes it’s also critical to find the center of the stud which is why I like the Franklin Sensor over the rest.
Plus we all are half deaf as we get older from not using ear plugs 😂
@@MORGANSMaintenance very true I just tried doing it.
1...drill/driver or hammer drill cordless is good cored if you don't have the $$ some slip joint pliers adjustable pliers screwdrivers hammer bunch of rolls of electrical tape there's other uses for them other than covering wires painters tape scraper spackle a metal mudd knife he should have to fix a wall jigsaw if you know how to use one circular saw rotary tool utility knife etc it all depends on your needs your budget your level of skill I leave electrical up to contractors that are qualified but I could do a lot of stuff I'm qualified for that I do handyman property maintenance type stuff is it a jack of all trades minus an electrician so I can do some plumbing jobs some painting sheetrock framing cabinetry tiles if need be painting that kind of stuff a one thing I left out if you're comfortable enough using it and impact driver you don't have to have a Milwaukee DeWalt nowadays they make some decent ones that are DIY grade like Ryobi skill if you can catch a sale on a Bosch get one there's plenty of good sales on them right now I say bye what you need don't overspend there's no need to
Yeah I agree. If you buy what you need when you need it… you will end up with a good set of tools in a few years. It takes time.
It’s after the first set when it becomes an addiction and you start buying what you don’t need 😂
Just impact if you're on a very tight budget
I used to always say drill just for attachments, but now they make about anything that will go in an impact. 👍👍
I'd probably choose an impact if I could only have one. I've been using the gen 1 M12 fuel for years in the field now and have become quite handy with it, and with all of the "impact rated" accessories, you can get away doing almost everything with an impact. Just my take. :)
Yeah I believe I would too. It used to be not even close and I would choose an impact because drills just wouldn’t put fasteners in as well.. I fasten way more than I drill, but drills have gotten better over the last few years (and are quieter). They have made the choice harder, but I’d still go impact.
Thanks for your take 👍
@@MORGANSMaintenance I believe with the accessories available it’s an all around general purpose tool for DIYr . Love watching your program always great info.
@@craigackerman9574 yeah, they make just about everything with that 1/4” on it now.
I remember the first time I used an impact. I kept seeing people using them on TV shows and I was on a job site where two guys had them. I asked them if I could put a screw in with one because I was curious what all the fuss was about. I put in one screw, went straight to Lowes and bought me one 😂.
They have certainly made many tasks better. I appreciate all of you watching and giving me feedback. I know this was a looong one 😂… I didn’t want to leave anything out.
if i was to choose 1 and only one drill, id probably get the m12 installation driver, because for me not being a real Ph.D it will do for the majority of IKEA assembly and the occasional putting up a shelf. if i need bigger, ill call upon the best tradesman i know, Dad.
Yeah I like my installation driver myself for most things…. These days either one with bit style availability, the power of both drills and impacts, speed controls on impacts, etc… you can get by with either one.
In the older days you needed a drill for drill bits and an impact for power.
Most people would choose an impact over a drill but I disagree. Especially compared to a hammer drill. You can do more things with a drill WELL than an impact can do things WELL.
👍… it’s a much harder choice these days with drills being more powerful than they were when impacts first came out. Now everyone has gotten so used to using impacts they don’t reach for drills. They are definitely quieter.
Appreciate your thoughts.
Type of home should be considered when choosing between drill and impact. An impact is fine if its a wood structure. Id always go for a hammerdrill first if in a concrete home.
Very good point! Yeah the place where I worked for 15 years was solid concrete, I can’t imagine not having a hammer drill.
Thanks for the advice 👍
I love my impact but my makita sub hammer is my baby. Shes hung tvs, punched thru 8 1/2" of cinderblock plaster and concrete to run camera cabling, install solar lighting on the roof and much more! Love her!!!
@@angelacruz71 yeah I always recommend a hammer drill over just your regular drill… well worth the few extra bucks. A compact SDS drill is even better if someone has the budget, but the smaller Sub Compact like yours will still get you in some places one of those won’t.
I need to get me a small battery powered sds. I’ve really wanted that a few times lately when I don’t want to get out the big hammer drill and the dewalt cordless “hammer drill” won’t cut it.
@@realworldtoolreviews yeah they are nice. The only downside to some compacts are they don’t have the chisel feature, but I mostly use them for holes and anchors.
Thanks for putting that list of tools together! Wow, you have a son that old? I didn't think you were that old myself (I thought maybe late 40s).
You are welcome
I’m 42… I started early on my kid journey. Wanted to still be young when I gained my freedom again 😂
He also did a lot of his College in High School, so he finished College early and flew the nest.
Oops. Sorry about overestimating your age. You're only 3 years older than I am. You've done very well for yourself! I'm still a slave to the corporate grind (IT job) and don't have any kids, just a dog.
@@davidmatke248 I feel older than I am… I’m sure I look it too. I hope I just don’t look as old as I feel 😂.
Definitely take the drill over the impact. The drill is much more versatile.
These days they have definitely have enough power to do a lot more things 👍
They both got there place but if I had to say more versatile it would be drill over impact alot more versatile
It is…. It used to be a landslide towards the drill for versatility and the impact for power. Now they at least make about everything drill related with an impact ready shaft… and the drills are really powerful
@MORGANSMaintenance yea could def get away with what preference was nowadays and m12 is awesome if electrician on trimouts all you need
I don’t know of any slip joint plyers that lock.
I don’t remember what all I said in this video, I don’t know of any either
i love impact just because its fast and easy to use but overall a drill is more useful...
Yeah, I think I use my impact more… but if I made the choice and didn’t actually have a drill there would be some times I would find out I possibly made the wrong decision.
Just based off how much you use, the impact would win… but what you can possible do with it…the drill.
Awesome video. Thank you!
@@curtiscrow8997 you are welcome…
Thank you for watching and taking the time to comment 👍
Any reason you didn't mention a ratchet and socket set? Maybe not as useful for home repair but I would think it would be very useful for a lot of general situations.
Yeah there are definitely more tools than these the more you add to what you want to do as a homeowner…
It doesn’t take long to say a ratchet and socket beats and adjustable or channellocks for certain things.
Where can I find the dewalt black drill bit insert ?
Where did I show it in this video, so I’m sure which one your talking about
That's it? Just that? That's all? 😮
I may have a problem.
😂… it’s a good starting point on day one… It takes a few years to grow into a problem 👍
The Hart professional stud finder available at Walmart is manufactured by Franklin at half the price.
I’ll have to check into it… does it work the same way?
@@MORGANSMaintenance it looks identical, except it also has a live wire sensor as well.
Yeah I looked it up. I don’t go to Walmart often but I think I’m going to check on one next time I go. I’d like to have a smaller one.
Appreciate you sharing 👍
@@MORGANSMaintenance I haven't seen any reviews on the 9 LED Hart Professional Stud Finder, I bought it on a whim since my Franklin Pro grew legs. Pretty impressed for $28 at my local Walmart a couple months ago.
@@jeradkiester698 you can’t beat that type in my opinion. I just put down 2000 LF of Base and it’s super nice to just slide along and hit studs.
The way you can lift it on/off the wall without having to calibrate it or anything is what’s so nice.
If you’re a casual home owner DIY guy and you don’t know what brand to get and you’re on a budget I recommend RYOBI. you get a lot of decent enough tools for a great price. Plus their whole platform is huge!!! I went with Milwaukee because I wanted as much American made as possible. And I used both to build a 20x30 shed in the desert. RYOBI worked well enough, but with Milwaukee it was very nice to get the job done sooner and get out of the heat.
Great suggestion 👍. I always say get the best tool you can afford (and mainly on the ones you use the most)… they all will get the job done, some just done a little easier and more enjoyable.
I have a few Ryobi tools myself that I use with a battery adapter. They are tools I might use once/twice a year and I don’t want to spend big bucks for a tool used that infrequently.
Thanks for taking the time to comment and share your thoughts 👍
Eye Protection
Knee Pads
Headlamp
Pencil & Sharpie
Awl
Rubber or rawhide mallet
Sandpaper
Allen wrenches
👍. Thanks for the suggestions
Let me guess your favorite tool company: dewalt? 😂
I like some of their tools. I used to use them exclusively when they were 18v, but I swapped from them when the batteries shifted.
The M12 Screwdriver works best for me around the house. Great video as always. On a side note , if you are in need of M12 or M18 battery mounts, I picked up some 3d printed M12 and M18 battery mounts from @neattools. I got them yesterday and they work great.
Yeah I kinda use my installation driver in that role. It why I hadn’t bought the screwdriver yet, but everyone says it’s great.
Thanks for the tips on the mounts 👍