FIRST TEST DRIVE in my KA24de swapped 300zx
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- There's something about these 90s Japanese project cars that make them so fun to build. This KA24de 300zx Z32 has been in the works for a few months. After many hurdles overcome, we are finally ready for the first test drive!
PrizzaMerch:
prizzamike.mys...
Become a Member to access perks:
/ @prizzamike
Spotify Playlist:
open.spotify.c...
For more behind the scenes:
Instagram: / prizzamike
TikTok: / prizzamike
Snapchat: @prizzamike
Discord: / discord
YESSSS FINALLY THE Z IS DRIVING
Too hyped! 🤘
@@PrizzaMike yo dude car sounds sick love those old Nissans I am actually thinking about trying to stuff one of them in our Honda Accord think it would be different type of swap
Man you’re one of the only channels I come back every day to check for a new vid on my breaks and lunches. This channel precisely captures just how amazing the community can be! I’m loving all the projects going down coming from somebody who drives a Tacoma and have been geared towards offroad for years, you’ve expanded my love and knowledge of all kinds of different cars through your videos. Thanks mike!
This and Jimmy Oakes are really the only car channels I truly enjoy anymore.
man whether its 240 content, Z content or junkyard treasure finds, the contents gonna be great either way. Godly content as always🤙
Appreciate you homie 🤘🔥
cant wait for you to start modding and fixing up the exterior of this car, its already so cool and yet it can get so much cooler so easily
I love this build! Would definitely like to see this become a battle of the work trucks and see which one is better. The Integra work truck vs the 300zx work truck!
I love seeing all the content you produce Mike although owning a 1991 z32 myself brings most of my attention to enjoying you build your own one too as I am learning many things that you share on all your videos but also about the Z massive shout out to you Mike we all appreciate the amount of work you put into your cars bringing life back to things that would have been lost to time itself. Lots of love and appreciation to you bro❤❤love from New Zealand!!
i just started a z car build on my channel, so cool to see how many Z owners are on here!
I absolutely love these uploads, everything you do is amazing. Thanks for keeping me entertained during exam season
bro really bought a Z, swapped it, and got it running before i even fully considered the swap i wanna do 🐱😂 good job dude! big learning experience
also the brake pedal could need adjusting/ the pin that is pressed could be stuck, same problem with my Z with the lights stuck on
Just wanted to say I've used the "its a lost hope" excuse on a couple projects for watching you rebuild the 240sx and other projects is really inspiring. Really shows you can fix it, it just takes time. And the guide of a friendly youtuber! Thanks again. You bring amazing energy to the scene! I'm hoping more are inspired by your positivity.
Your brake switch may not have failed. Check on the pedal itself. There should be a rubber grommet that fits into a round hole. If it falls out, the lights stay on (grommet pushes in the switch and turns lights off when not braking). Also make sure your clutch pedal has the grommets as well. Should be 1 at the top of the arm (safety release to start) and 1 at the bottom. If they’re old and crusty or missing, $10 at Advanced. Easy fix.👍
The versatility in ur content is another reason why I all glued to your channel !👍🏽
For the brake light issue, check the top of the pedal to see if you're missing the green rubber plunger stoppers for the brake light switch
I glued a penny under mine to replace the stopper lol
I’ve had my TT project that runs (not well) for a year. You’ve swapped a whole motor ina dj got it running within a few months. Goes to show the dedication
Dude I'm grinning ear to ear! So proud of you. I'm excited to see it completed with all the smaller details buttoned up.
It's amazing to see the whole process and work put into this Z.
i just started swapping a Z over on my channel and im just dreaming about that first drive! this was some great inspiration!
that things cool. ill subscribe. good luck
@@grapetv8770 thanks for the support homie
@16:01 it is the highest point of the coolant system, it is indeed to bleed air from rad. odd but it is.
You're the only one TH-camr that I can watch in one sitting. U upload- I watch, regardless of the videos subject
I’m a hot rod person but I like hard work no matter what car it’s on well deserved drift car
"other than those few things it's ready to rock" 💀💀💀 i feel that
Stoked to see it running! Watching your vids motivated me to pull my head outta my ass and get my speed3 road worthy again, appreciate you!
Hell ya!I've to hear that man 🔥🤘
I was just rewatching the vid of you putting this motor in last night and hoping for an update!!!!! LETS GOOOOO
Hello, just wanted to say that you are my inspiration, and I love watching your videos. Thank you for all the amazing videos and being such an awesome person! ( best channel on TH-cam)
Now it's time for the beautiful z to drive home I await that
@Prizzamike thank you for another beautiful upload
I'm so glad that I found your channel like 1,5 years ago, so hyped for every video, love your work and positivity, keep on doing it 🔥
I love how you get into detail explaining the harness part of the swap. Can’t wait to see it done.
Yes!!! Glad you got it running.
I’m so hyped for this one man. Such a unique build, I fuck with it heavily. Gotta cop me a prizza sticker soon
Love the blue cables , so bright .
Amazing work as usual young man!❤
This build is soo interesting since you can use part from the Z and the KA
It’s Japanese lol same shit
Can tell this video was longer time coming, still got the shaggy hair before the fresh cut haha. So glad to see the z moving under its own power!
Kept my KA stock and clean for the longest time and It was def the most reliable motor I ever own. Great choice 👌🏼
i love this build, i was talking with a friend about doing this same swap in my z so these videos are gonna be a huge help
Mike look into poppy's Patina! You could wet sand the flaking clear and use their wipe on clear and make the z look amazing with no paint work!
Great Job on the wiring! You took the extra time and its gonna make for a much cleaner install.
Love that its got the under dog nissan engine in. Please keep it KA
Cant wait to see the 300 Z turbocharged. You already got the down pipe. Nice build !! Wonder how many pounds of boost it can take stock ?
Good man Mike. The 300zx a rare sight here in ireland that's to our draconian road tax system. Anything over 2 liters and it gets insane on a car registered before 2008 as it was based on engine size up to 2008 and after that, it was emissions based. If you had a z wit the OG motor in it here, it would cost about 2000 doll hairs to pay your road tax for a year. Be a pretty smart conversion here to put in the KA and boost it. Look forward to seeing you getting it sorted out man. Warm regards from Ireland as always.
Bro I’ve literally been stocking your page just for this video 😭😭
Super stoked to see the Z moving under it's own power
These frequent uploads have been great! Your channel is great!!
Awesome job bro the z is rolling under its own power your right the idle and sound of the engine even though it’s missing the exhaust it still sounds healthy and also from what we’ve seen internally that engine looks great for awhile of beating on keep it up bro can’t wait to see the next video
You are a genius. That is bad ass swapping a totally different platform in to the z
I’m new to the channel and I love it. I know I’m not an OG but I hella support you bro
your brother got that juice wrld shirt on😮💨😔999 forever 🫶
im happy 300ZX is running
Amazing work! Blazing trails!
Also, for anyone interested in a great way to clean engine bays and engine grime, try a Citrus spray over harsher chemicals like Purple Power. Citrus spray won't damage paint, etc.
I made a short video on how well it cleans and how cheap it is.
I pretty much clean everything I can with the Citrus spray.
finally ive been waiting for the z update!
I love these type of swaps putting something else in where it was not meant to be I wanna do the same for one of our cars but not sure how it would work
im doing exactly that with another Z over on my channel lol
@@LooseFab I have a 97 Accord that was hit at Walmart lady cut lanes an slam into me so we doing full build but not so sure if I want the f22 back in it of if I wanna 1jz it or do a bunch of mods to try an fit a ka24
@@thunderheartgaming4416that would be sweet!! shame it got hit though
@@LooseFab it's cool 😎 it's gonna be resurrected gotta save them all that an this car has a lot of memories my best friend and I use to race each other on the highway to an from work cause we worked close an used the same highway sad thing is he's gone now but the car stays
That Z1 clutch line is installed backwards. The Banjo bolt is supposed to go on the slave cylinder and the adapter port is supposed to go on the clutch master.
Pretty unique swap though. Keep up the good work with the 240 and the z man!
bro has the best transitions, awesome
Holy shit Mike wow!!! You work so dam fast dude, it's running & driving. Dudes it's taken me a yr to change my dam starter hahahaha brother you are kicking life's ass. Hell ya dude !!!!!!
Finally made an upload right away. Love the 300zx. Now you have to many cars working my guy! Haha. Best TH-cam channel by far. Can't beat this content.
All this hard work finally shows out great job 🎉been keeping up with every video
Great to see ur z running
the lower harness will also work with the RB and also SR20 and also CA18
So satisfying...the cleaning part...🤗
bad ass broskie!!!! stoked to see more z stuff. love the z32 chasis
Thanks for making these videos ❤
The last shot tho 😍😍😍
Mikes out here doing the lord's work! 🙏🏼
Nice to see the Z running 🔥 cant wait to see more integra content as well!
Yessssssss man finally ur z is now finally don't sitting for 1 year and 6 months
Re your allergies , try to find a local bee keeper in your immediate area . You can Google this , but local honey can sometimes counteract pollen / allergies etc as the bees process the same pollen etc in your area if that makes sense .
Really!? I never heard of this method! Definitely worth a try!
Thanks!
@@PrizzaMike Very welcome . Oh and high from Qld , Australia 🙂
MIKE IS THE GOAT 🐐
Nice color on blue z, and thanks for this video)
Thank you for the great video buddy have a good weekend be safe
Hi Mike great video as always big big UP to you from France 🇨🇵 and see you next video 👍👌💪😎
I misread the title as FIRST TEST DRIVE in my “K24” powered 300zx and was about to skip. Glad I reread it and watched the whole vid man😂
Always boosts my mood when u post 👍
Okay now I know why my clutch line looked funky 🤦♂️ can’t believe I’ve been putting them on backwards 😂 works just fine but wow
i sent mr. prizza a picture of my dog once and i forgot i did that until now
the pollen is crazy on that car
Let’s goooooooo🎉 congrats man keep up the vids we need moreee
Yay finally congratulations ❤❤🎉🎉🎉
The Z lives!!
Yeah buddy you got a lot done in this video 🎉 hope to see a drift video from last Saturday
idk why i decided to stay up tonight but hey 4am upload
Obrigado por esse vídeo traduzido,amei
Damn i cant wait to see that car on roads and done
Amazing work as always
whatever content u upload is amazing to see bro
IVE BEEN WAITING SO LONG!
With all of the work you do on clutch and vrake lines I would suggest you getting a set of line wrenches. It will make working on them significantly easier.
Great Z ! 🎉
That screw is a bleeder. All z32 aftermarket 3 and 4 rows have them. The cooling system in the car takes a significant amount of time to burp with a larger capacity
I thought that Prizza only new alot about the 240, but apparently he's some sort of JDM god?
good atuff.. when it comes to bleeding clutches and brames i use a check valves to help get the fluid to start flowing.
Almost time you have to think about the next project 😜
Dammit 😅
Any suggestions?? 🤔
@@PrizzaMike rwd swap your integra 🤔🤔🤔
New daily who dis? LMAO he hit us with that
The subtle carbon fiber flex 27:58
DN1 Z32 gang 💪🏼🤝🏻🔥🎉
Use a quarter and tape to fix the brake lights 😂 my s14 did it to
I wish 300 came from the factory with this option. It would have been really popular.
I agree!
Ayo in before work liked before loaded as always
Letsssss gooooo always good waking up to a new video 🙏🏽🙏🏽
Yeahhh!!!
Awesome contents as always!
Perfect content & presentation. Congratulations on your channel's success. 👍👍