How to Build a Shed - How To Build Roof Trusses - Video 4 of 15
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Our 8x10 and 10x12 shed plans for the shed built in these videos can be found here: countrylifepro...
Save 33% on our plans right now with our Winter Buy Now Build Later discount! Enter Code BNBL10 during checkout.
In this video Henry teaches you how to build your own trusses using the shed floor for truss layout and assembly jig. Everything you need to know is included in our detailed instructions - some of the main parts covered in this DIY roof trusses tutorial are:
- How to measure and cut the truss rafters and bottom chord
- How to layout the trusses on your shed floor
- How to make the assembly jig for the trusses using the shed floor
- How measure, cut and install the plywood truss gussets
- How to assemble, glue and fasten the trusses
Need Inspiration? Checkout sheds built by our viewers using our videos and/or our plans at countrylifepro...
View 15 all of our Shed Building videos on our TH-cam Channel: / countrylifemedia
Our Shed Plans for this shed are available here: countrylifeproj...
We have more projects coming up in the spring of 2023, Don't miss them: Subscribe to the Country Life Projects channel here: www.youtube.com...
#shed #gardenshed #diy #framing #carpentrytips #carpentry #woodworking #sheds #trusses
Shed Design & Plans Copyright Countrylifeprojects.com - All Rights Reserved
Thanks. I used this as a basic guide to build myself a 10x16 shed and it turned out great! This was a genius way to lay out the trusses BY MYSELF. Built the whole shed with no help, which was really the biggest value in this series!
Good stuff this guy. The best advice I got, for a small shed, was using angles instead of pitch. Later trim and finish work will be same angle, no recalculating. For a 7/12 pitch the degree is 30.26°. I like an even 30° better.
this is the easiest tutorial I have ever seen for trusses!! love it.
I know this is an old video but I am getting ready to build a 16x24 workshop using rafters and ridge board. One thing I picked up from this is to use an angle instead of pitch. I am looking at at 7/12 pitch but will use a 30 deg angle instead to make everything down the road easier.
“ Strong enough “??
Sir, you could land a helicopter on those trusses.
Give this guy a medal. These tutorials are solid.
Henry, I have reviewed dozens of truss designs and roof systems and I have to say that your system is the best. A simple design, and easy to build and install. Thank you for your videos.
Got my rafters up. Only had to watch your video about 6 or 7 times lol. Thanks again for your help to us DIYers
Just the cross-cut versus the rip-cut was worth the time... Thank you for sharing!
Danke für dein gutes Video und deine Arbeit 👍
Grüße aus Germany
Nice job except once you break through the skin of the plywood you lose strength.
Hence the use of glue... It is common to sink screw heads (or nails) into the top layer of the plywood in framing. Never seen any professional builder do it differently.
This is the tuturial perfect thanks brother 4 your time god bless
I learned a lot from your videos, thank you.
I know nothing about carpentry but 3 years ago I built my beautiful shed using country life projects plan. My shed is rock solid and better than the units they sell @ Home depot.
I watched the video and read all the comments. I agree with all the positive comments and appreciate your answers to questions. Thank you for a great video that is done very well, clear and no wasting of time. I’m about to build a shed so your videos are a great help. Thank you.
I wonder how many people have had a completely different outcome from IF they didnt see these videos. Cause i gaurantee my trusses would have been a failure if i didnt watch this. I did siding for 10 years and before that, i did do framing for 2 years but I've been learning the most from these videos
Never built a roof truss before today. This video was essential as a guide to a successful venture. Thank you!
Love this! Thank you, and for the little tips along the way. =)
Wow!! Wish I had seen your videos before I did my shed. Excellent work and great teaching.
I like this method better than any other,lol, yes the math calculations confuse me,man am glad i found this & i've build a 16' x 20' using this same method & it is awesome!
Excellent series Henry. I will employ these instructions in my shed build. Experience counts.
Thank you for the reminder about plywood grain orientation and framing wood “crown up”.
You showed me exactly what I needed to know. Thank You Sir!
I have been racking my brain trying to figure out the best way to do trusses. THANK YOU! Made way easier.
Great set of videos and a real pleasure to see a tradesman that takes such care and pride in his work, instead of the culture of short cuts we have today. Thanks for the excellent advice
Great Videos and very clear instructions. If I go to 10 foot high walls, can I still use 2 x 4's or do I have to go to 2 x 6's, Doug
Hi Doug... glad you like the videos and yes you can go 10' high - although you may want to add horizontal blocking about half way up to keep studs from twisting (in some locations this may be required by code but that typically applies to houses and garages etc.).
This guy talks funny but damn sure knows his $hit.
Thank you for posting this, I am contemplating building a 12'x16' shed and the only thing I am not at all confident about is the roof trusses. Would your same 60 degree formula work on that? You made something that is complicated not look as scary.
Great work! Thanks for the time to show us how to do this.
Only thing I'd do differently, is to use a preset drywall screw counter sink so as not over countersink screws and lose strength.....
That is not a bad idea... however, do keep in mind that gussets are glued too and they will likely never come apart.
Hi and thanks for good information my question is can I use your method 30 and 60 degree on a wider shed say 12’
Thanks again
Hi Thaer, You could use the angles, but this truss design is suitable up to 10' wide for moderate snow loads. For 12' wide a stronger design would be required. In most cases, just ordering pre-fab trusses designed for your area is best as they are engineered for the climate - and usually are very inexpensive.
Why are the bottom gussets sraight as opposed to triangular?
The gussets on the bottom only stop the rafters from pulling away from the bottom chord, so adding a tringular gusset that would hold the rafters and the bottom chord in a triangle shape is overkill in my opinion. Also, a single strip vs triangular is easier for most people and it does the job it needs too do.
Thanks, sorry for the stupid question.
Not a stupid question at all... it was very good one that I am sure many people might think about. When I seen it I thought, hmm good question. Let's put it this way, if a person wanted to use triangular gussets at this connection point, it would not be incorrect, just different than the way I did it.
Thank you. You are a highly skilled teacher!
Great video Henry.....really appreciate it! What are your thoughts on nailing the gussets with a framing nailer vs. using construction screws? As I understand it, nails have much stronger shear strength than screws.
Hi Joel... yes nails have more shear strength, but in combination with glue, and the span of the trusses for this shed, screws are fine. In home construction or a garage, then yes, nails would be the better route - but I wanted to provide a video suited to the average DIY'er with a basic set of tools.
Hi Henry, great videos and instructions! My question is how did you come up with the top center part of the rafter? You showed how to get the bottom center of 43 1/2 I believe, but not the top part where it connects at the 30° mark...
Connie Johnson Hi Connie...If you are referring to the layout on the floor of the shed, that is easy. By the time you do the trusses, the floor should be done and square. Measure from the side of the shed with the full sheet of plywwod to center at the bottom, repeat at about 30 " along that side to center - then draw a line from the bottom edge to the second mark. Be sure to allow for the 1/8" +- that the plywood is inset from the edge of the floor joist header. The line can be drawn longer than 30" to be sure you can easily see it during rafter layout.
What type of Star bit are you using for your construction screws? It looks very durable.
The 30/60 method is the easiest/best method for simple structures.
The only thing I would do differently is to cut the complimentary 30 degree angle on the bottom end of the truss as mentioned by @Country Life Projects & Living when responding to @DominionofGod because where I live Eve Trough's (Gutters? ) for water/rain management is a must. This changes some of the fascia finishing measurements/details but nothing that can't be figured out.
what slope did you use?
+AnimeFinite Piano ... it is basically a 7/12 pitch. However, to make it easier for viewers, I opted for an exact 30 degrees.
I don’t even want to guess at the amount of time I have spent watching shed videos....started my shed 4 days ago and have made a lot of mistakes. Currently hung up on rafters. WHERE WAS THIS CHANNEL 5 DAYS AGO?? Lol wish I had found you sooner.
First of all, great videos, I’ve already picked up a lot of useful information. My question is, I’m building a 16x28 storage shed and I wanting to use your truss method. It not sure on what width board I would need to use plus do I need to brace it differently as well.
Thanks
Trey
Hi SC... for a 16' span, the design of my trusses is not suitable. You would be best to order engineered trusses - these would be built for your local climate and should be fairly inexpensive to purchase. Check into this before you proceed.
@@Countrylifeprojects local place wants 200 dollars per truss !!! that's why I am here, for A 15 foot span, - excellent video.
I am interested to know what the pitch actually is, btw. I wanted a very dramatic pitch on my shed but frankly I couldn’t work out how to figure it. I got a different method every time I would search for a how to. For example, rafters on an 8ft wide shed with a 9/12 pitch...I never could figure out and I feel very defeated. And dumb lol. So I just saw the that this is basically a 7/12 pitch. And I see why you did it this way. Very cool
I am about to build another building in my yard, 12X24. I have already planned on building my trusses the same way you have here but I am going to. do mine without the bottom chord. Also will use 2x6 lumber so I can space them two feet apart I will also use rafter hangers on my walls to support the trusses. I am going to double the plywood gussets or one on each side of the truss. In my town, if you are building under 500 sf and not installing plumbing or electrical, no building permit is required. Only a drawing of the building for the zoning board to have on file.
If my shed is 10' wide, do I also use 10' rafters on the trusses? Also do I keep the exact same angles? Thanks in advance for your help!
Tony Jackson Hi Tony... once you lay out the trusses on the floor you can determine the length of the rafters and decide how much overhang you want as well. Just measure on the angle from the ridge(peak) to the side of the shed (edge of the floor) and then add the amount you want for overhang (soffit). You can use the same angles but remember that the wider the shed, the higher the ridge line of the roof (peak). I also recommend using 1/2" plywood gussets when building wider trusses than used in our videos/plans - e.g. 10' or 12' wide.
This guy is amazing, he sure does know his business....but it's just a bit much for a beginner that's for sure
I've seen some sheds that are 10' or wider without the bottom chord. Is this to save material? I'm building a 10x18 shed, and wondering if there is a way to bypass the bottom chord, as it a seems I would have to purchase some 12' 2x4s in order to cut down to the correct size.
Hi Corbett, personally I would use the bottom chord, it adds a substantial amount of strength to the trusses. With the design of the trusses I made in the videos, for a 10' wide shed, 10' 2x4's is all you should need. If you are stick framing a shed roof with a ridge beam that spans the length of the shed, then you can eliminate the bottom chord - but not suggested with the design I provided, especially if snow loads need to be considered.
Is there an advantage to plywood gussets over a Simpson truss plate?
Hi Scott, Truss plates need to be installed properly and in my experience, I seldom have seen these put on correctly. Since they are engineered, you have to know what size to use and make sure the pins are all seated properly - otherwise they won't provide the intended structural integrity. As such, for a DIY video I opted for plywood gussets that are much easier to make and install correctly.
Thank you so much for doing this video. your an awesome teacher you don't leave anything out . thanks again
Will the 30 and 60 degree angle work on a 10x20 ft shed?
If it is 10' wide - Yes.
General question, why is it you use screws as opposed to a framing nailer? Just wondering thanks. Personal preference?
My personal preference is a framing nailer, but I wanted to do a complete shed with tools most DIY'ers would have... and not many own a compressor and nailer so I opted for screws for the most part - and for a shed it is fine. Larger structures of course must consider shear strength and the benefits of nails.
MAN! Step by step and easy to understand. Instead of just ASSUMING we all know a certain step, each one is explained. How to do it and why! OUTSTANDING! One thing though. Its a PROJECT (pronounced PRAW ject) not PROE ject! LOL. Just a little humor.
Yes, I know... I noticed that afterwards, but there was no way we were going to redo videos just because of that.
I think in response to a question in one of your other videos, you commented your truss design for a 10x12 shed would be different. Just curious what you would do differently with that slightly larger shed.
It depends on your climate - if you get heavy snow loads you may want to change up the plywood gussets to 1/2" ply and if really heavy snow loads, use them on both sides of the inner trusses.
Your video was really helpful
Very useful. Thanks for the video.
Awsome thank you very helpful 👍👍👍
If you want you could also put some scrap pieces inside the guide as well
What is the pitch for this roof (rafters) ?
It is basically a 7/12 but we opted to go with 30 degrees to make it easy for everyone (setting angles on saws etc).
How necessary is the bottom chord on the truss?
Good question... this depends a lot on where you are building... with a snow load I would not chance building a truss without it (keeps the truss from sinking at the peak with weight on it). If you are in a climate with no snow, you could build without it but I would recommend making the peak gusset bigger and applying it to both sides of internal trusses. That said, overall it is best to keep it, and if you opt not to use it, make sure it is safe to do so - in other words, proceed at your own risk.
This is the difference in a craftsman and 90% percent of the people who think their craftsman... great job Henry !
Question Henry. Bought the plans and been using them to help build 12x12 shed. I had originally planned to not use a bottom chord, just the two rafters with bird mouth on top plate? Is the way you did it more stable? And preferred? Is 12 ft to long a span to not use a bottom chord? Thanks for the plans and videos
Hi Todd, well, the plans and truss design was intended for a maximum span of 10'. At 12' I would use the bottom chord - it ties the two rafter ends together increasing strength substantially - basically, if the rafter ends attached to the top plate cannot move with the bottom chord in place, the peak should not fail. But as noted prior, I designed the trusses for a max 10' span and each element of the truss is important.
Good info...easy to understand..thanks
awesome video! My 10x16 has a concrete floor. How would you do this on concrete?
Hi Mark... Great question. Although it would not be a perfect solution, the best I can come up with is to do a similar layout on the concrete (mark a few lines on the floor where the parts have to be and then place the pieces on the slab and assemble in the same way. The main difference is that nothing is held securely in place while you do this, and you would need to make sure the pieces are at the lines when you fasten the gussets to the rafters and bottom chord. Once you have one truss assembled and you are sure it is accurate, you could flip this over, attach small pieces of 2x4 to the outside edges of the truss and then use that truss to drop the pieces for the next trusses in to place - that should work. Pieces on the outside of the truss would work much in the same way as screwing pieces to the floor of the shed.
I am in the process of making more plans (and videos) and I will see if I can come up with a better solution... but, as winter is hitting us right now, that won't be until spring time. Take care and success with the remainder of your shed build.
Highly skilled and so easy to listen to with a very nice voice.
If I wanted to make the pitch a little steeper is it possible to use a different degree amount instead of 30 up top and 60 on bottom?
Hi Daniel... of course, but if you are using our plans it will change things up a lot. If you are not, then it should not be an issue. Just double check things as you go if following the videos - success with your shed build :-)
I really like what do you have showed us about these trusses thank you Will this work on 10 and 12 foot sheds also
Yes, but it also depends on your climate - if you get heavy snow loads you may want to change up the plywood gussets to 1/2" ply and if really heavy snow loads, use them on both sides of the inner trusses.
How would this jig system work if you wanted less pitch. Say 3/12. ? Great videos. Thanks so much for making them.
Hi Todd, yes, it will work for any layout. You just need to figure out the first truss layout and then do things the same way.
You mentioned the bottom chord being the length of the shed base in front + 1/4 inch. Since most lumber is sold at a max (that ive seen) of 12 ft long, what would you do if the length was greater the 12ft? Or if the length was exactly 12ft. You cant rly get 12.25 pieces.
I do mention in one of the videos that the shed is 7' 9" x 9' 9" to maximize on use of materials, mostly in the finish stages. When doing so, you would not have this problem. Not sure where you live, but in North America, common lumber is typically available up to 16', sometimes 18' and 20' for some lumber (although you pay a premium for long lengths like that). But, if you had to, you would make the trusses exact and not allow the 1/4" - however, if you do, your wall framing needs to be exact, perfectly spaced (wall to wall). The 1/4" gives you a little play just in case something is out a hair.
I had a question on the trusses. Some people will leave out the bottom chord and just use rafters, using a birds mouth and seat method to tie them to the frame. What are your thoughts on that? I live up north, so snow is an issue, but looking at the pre-fab trusses at the store they also exclude the bottom chord. Appreciate any direction on this.
Steve MacNeil I personally would never leave out the bottom chord for this design of truss... it makes almost impossible for the truss to collapse (the rafters would have to pull apart at the base connection for the peak of the rafter to drop). In heavy snow load areas I would keep the bottom chord. The trusses you see in building stores are likely scissor trusses and are designed differently - engineered. I used the design on the shed for simplicity and ease of construction.
Ok
With a 7/12 pitch there would be plenty of room for a loft. How would a loft be incorporated if there is a bottom chord spanning the width of the shed? Could your shed and shed plans be flexible to design without the use of a bottom chord?
You could leave out one of the bottom chords near the center which would provide a 4' opening.. or less if you like. You could reduce the width to increase floor area too. If I was going to use this area for storage I would use 2x6 bottom chords vs 2x4.
Excellent!! Thank you so much.
Thank you a lot for this excellent video series. I want to build a 12x16' shed. Can I use this same technique to build my roof trusses?
Hi Atlantic... I would not use the specific design for 12' trusses (and it also depends on snow loads etc). For a 12' wide shed, check into King Post truss design as it distributes the load better which is more important once you exceed 10' in width.
Hi, I'm trying to figure the math here. You said you cut the rafter at a 30 degree angle but the other angle is 60 degrees. I'm using my speed square but I'm coming up with 52 degrees for the bottom cord.
Hi Jonathan... not sure why this is, if combining angles to come out square (as would be the case working from the center of the truss) 30 and 60 = 90. Not sure where you are going wrong on this - Sorry.
Is there a playlist for this series so I don’t have to hunt through TH-cam’s terrible “Recommended Videos” section? 😂
Hi Hakeem, although I have not made a playlist, there are many out there. Search YT for Country Life Projects playlist - or similar and a few should come up.
Country Life Projects & Living Thank you very much. I am appreciating your series wholeheartedly and will give your site a visit once I’m done!
Damn.... thanks for your professional blessing for me. May God bless you.
How do I measure the Rafter Gusset before I build the rafters? You said you would cut yours at 36", but I do not understand how you measured that. Could someone please explain? Thank you in advance.
gusuave007 The measurement of 36" is the bottom length of the gusset. The angle of the roof is 30 degrees (60 for the sharpest angle). So, on the gusset for the peak, it is 60 degrees at each end back to the center of the gusset.
Thank you very much.
Hi, thanks for the videos. Is there a reason why you don't use a ridge beam?
Hi Tom... A ridge beam is used when stick framing a roof. Although I am sure it can be built into the design of trusses, there is no effective way to add a ridge beam to the typical common truss without weakening the truss structure (e.g. cutting into the top gusset). Without a ridge beam, I personally feel it is important to use 1/2" sheathing on the roof as well - I have heard of builders using 3/8" but IMO that is asking for problems down the road.
if you were going to put studs in there straight from the rafter down to the bottom chord would you just screw them in from the top and bottom (out side of 2x4)? (plus glue)
DominionofGod Yes, glue is not critical as these are mainly backing for the LP Panels but it never hurts if you have extra left over. Nails are okay too.
Hello sir. I had bought the supplies before watching your video. I bought truss plates, I think that's what they're called. Will those work as well as the plywood gussets? Thank you for this great video
Hi Random Guy... Truss plates work with truss designs engineered for their use and placement. I did not use these as I have seen them installed incorrectly more often than correct (not seated properly, bent teeth or points as they might be called etc). If these are not installed correctly, they are not going to do what they should - and likely fail.
I decided to go plywood gussets with construction glue because it is much harder to go wrong. Very hard to install plywood gussets incorrectly and glue adds substantial strength.
So, I would say, unless you know the engineering specs and know how to install these plates properly I do not recommend using them.
@@Countrylifeprojects thank you sir for replying to me so fast. I'm no carpenter. Sort of DIY handyman, at least I think I'm handy lol. I'll be going with the gussets. Thank you again. P.s. great channel. I'm a subscriber for life now
Love it viel grüsse aus Deutschland
is there a rule to how many trusses you need per floor dimention? floor joist you taught me are 16" on center how about trusses?
Hi Robert... 24" is typically the maximum spacing and okay for areas not subject to heavy snow loads. If you have heavy snow loads you may wish to go 16" centers.
Can I use the plans to build a 8 x 18 shed? Can I canopy one gable end to extend the shed from 18 to 24 feet? Code requires I be on a concrete slab-do I still build the floor?
Joseph Hudetz sounds like you would be changing things quiet a bit and I don't think the plans would be useful in that case (helpful maybe, but you would need to make changes yourself). If you need to build on slab, you would not build the floor and your 2x4 plate ideally would be pressure treated with a sill gasket. If you are building to code and the shed will be inspected, be sure to see if venting is required or not..
NICE!!!!!!!!!!!!!!
When constructing a 28 foot truss, how long should the gussets be splicing the bottom cord?
Hi Sander... I would not build my own 28' trusses. For the cost, I would purchase engineered pre-fab trusses. Usually not expensive and designed specifically for your local climate.
@@Countrylifeprojects Thank you.
👍👍👍👍❤️❤️❤️❤️
How would these change if you were considering adding gutters to the shed?
DominionofGod If you are referring to the ends of the rafters they would be cut at 30 degrees to match the peak... however, a lot changes in the way you finish the fascia boards, the roof sheathing etc. Beyond the scope of this shed.
I like to lay out 1 truss on the floor like you have done. But once that is done, I build all the others on top of the first truss laid out on sawhorses. That way, I am not crawling around on my hands and knees. I also use galvanized nails- they are cheaper and do not split the wood as much as screws.
This is basically one of the questions I had. I know not everyone is going to have a framing nailer (and compressor)...but is there a real structural reason for using screws instead of nails? Or is it just because most DIYers wouldn't have a nailer?
A reason that overcomes the 5x (or more) price difference (and the huge time savings to set nails) between nails & screws?
You hit the nail on the head so to speak! That is exactly why we opted for screws as most DIY'ers will not own an air nailer setup, and it would be too costly to rent or buy for a small shed build. Structurally nails have more shear strength... and for house or garage construction I would highly recommend the use of nails. However, IMO, for a small shed, screws used as we did in the videos are fine.
Say you wanted vertical fascia e.g. to install a gutter underneath it. Would it then make more sense to have the bottom chord protrude out the full width so the fascia attach to the ends of that bottom chord and the rafter sit on top of the bottom chord? So you'd have no angled cuts on the bottom chord and you'd have an angled cut on each end of the rafters. Would that make the trusses any weaker? (I can't help thinking it would actually be stronger as the meeting of the rafter and bottom chord would no longer be i the plane of possible movement if it did slip but maybe that's an illusion)
This would not be a good idea. With any truss design the weight of the roof must transfer down to the bearing walls. If you extended the bottom chord and placed the rafters on top at the ends, most of the weight of the roof is on the ends of the bottom chord and not on the top of the bearing walls. While this may not show or fail on a small shed, it could cause major issues on a larger structure. It is better to trim the ends of the rafters plumb if you intend to use gutters. If you look at engineered trusses, you will find that the design always transfers the load back to the bearing points in one way or another - subject to the type of truss and intended load it is designed for.
An exaggerated way to look at this is would be to consider what happens if you put a 2x4 on edge, secured it to the floor of the shed (at both ends)and let the end stick out a 3 feet... if standing on it above the floor at the edge... it would not sag, but if you stood on the very end it would sag - and this where most of the weight of the roof would be supported if you did this. If that lumber has any large knots, it would likely break.
All that said, it is a shed and whether you do this or not depends on how much overhang you plan to have. If you have less than 12" with little of no snow load, you probably would never have an issue - but I stress probably and not for sure.
I personally would not do it that way, but that does not mean it wouldn't work - if you do this, make sure the gussets (for bottom chord to rafter) are big enough to reach back to and above the bearing wall, and triangular in shape so the rafter and bottom chord are tied together - this would help transfer the load back to the bearing walls from the rafters.
I was thinking of virtually no overhang so might be okay, will think carefully though, many thanks for the advice!
Would these types of trusses work on a home that is 30' wide?
Los DinE Hi Los... These type of trusses used for the shed are not engineered and suitable for small sheds and outbuildings. However, when it comes to a home or garage where you likely will spend a lot of time, I personally feel it is best to used engineered trusses provided by a qualified manufacturer. There is a big difference between a shed and your home - I would want to make sure an investment like an home is built right using products designed to withstand climates and conditions for the area I live and to make sure everything complies with local building codes.
Obviously different sized sheds would require different amounts of trusses; but how do you determine just how many to use?
Are they required to be specific lengths down the shed till all the space is used, or just a number chosen and spaced out accordingly?
For small sheds the spacing is typically 24" on center (have a look at Home Depot or Lowes sheds). However, this is subject to the weather conditions in your area. For example, in areas of very high snow load you may need 2x6 rafters/chords spaced 16" on center. This is question to ask you local building inspector (or local architect/engineer). Also, DIY trusses are good for small sheds, but IMO, anything over 10' wide (or if you are not comfortable making your own) and you should really consider buying engineered trusses (they are actually very affordable in most areas). Some lumber yards sell trusses for sheds and small outbuildings starting at 8' wide and roughly $25 to $30 each (price will vary by location).
Country Life Projects & Living
interesting, i was considering something around 11'
I just moved to harrisburg PA not that long ago. Not to far away from the appellation mountains. So im expecting the snow/rain fall to be a little bit higher then im accustomed to in NJ. So i was initially thinking trusses every 16 on center anyway. - If it did end up going that route, would it be beter to have them on the frame studs that are 16C or stagger them in-between studs?
Attention to detail is great 👍
Great video's Henry. Can you tell me how long it took to complete your shed start to finish. I'm worried about how much good weather we still have. Don't want to start something I can't complete.
John Domik Hi John... Well that could be a trick question. The shed in the videos took a month, but that is only due to all the video setup, shooting and working around bad weather. If you have good carpentry skills, good tools, and decent weather, under normal circumstances this shed should not take longer than 6 to 7 days. A professional should be able to do it in 4 days, 5 at the very most (a lot depends on your skill level and tools available to you).
Country Life Projects & Living Actually that's great. I fully understand the issues surrounding shooting the video. I have good skills, good tools, but at this time of year the weather will be a factor. I will go with the 6 to 7 days. Thanks for the feedback.
Your videos are excellent. I have a question I hope you v
can answer. What is the easiest way to make a jig for roof trusses if you have a concrete slab with j bolts for bottom plate ? Thank you.
Hi William.... sorry for the delay... been a busy few weeks. Very good question! If it was me, I would frame up one of the long walls, screw a few sheets of plywood to it (just enough screws to keep it square and not move at all) and then do the layout as noted in our truss video. When done, remove the plywood, finish the remaining walls and erect them as noted on our videos.
Country Life Projects & Living
Works so well. Love this!
Nice info thanks
And thanks for the great video by the way
i like that power driver but not how much it countersunk the screws on the gussets as it basically ate a good chunk of the thickness ... I mean, a little less would keep things stronger.
When used in combination with glue, there is little to be concerned about.
Well, I trust you pro point of view :-D - thanks.
Yeah I was thinking the same thing. I am following along but I'm going to try not to bury the screw heads
Thanks.!!!!!!!!!!!!!!
First time I heard joists call cords
If stick framing the roof they would be called ceiling joist. In truss construction they are are called the bottom chord.
Thank you for the video
Hello Henry, I love the videos you put together. thanks,
I am putting together a shed but the dimensions are a bit different from yours. I am putting together a 17x8 (space available). I am interested in the truss design you have here, since my shed is 8' wide as well I was wondering do you think the truss assembly will work for me?
Another question I have is load weight? My wife want to add fly tiles to the roof and not shingle, I believe shingles are 6 psf and the tiles were rated at 9 psf. My adjustment for this extra 3 psf is to have 16 in centres instead of 24. Is this a reasonable adjustment or am I just adding more weight to the roof for nothing?
Ralph Curtis Hi Ralph... SInce I am not an engineer and not familiar with the tiles you want to use, I cannot say with 100% certainty what is required and safe. However, it is a shed and I would think the trusses at 16" centers should be more than enough - but the final decision is up to you. Adding more trusses does add a small amount of weight, but strength also - I wouldn't worry about the extra weight of the trusses. The extra cost of lumber and extra time to build/install these extra trusses is very little, the benefit much greater..
Country Life Projects & Living Thanks Henry,
I made a few typo's up there, . . what I meant to say was "Clay Tiles". But I understand your point, thanks again.
I think I am going to use a majority of your construction methods as they are pretty sound and good advice.
I will let you know how the project turns out. I am starting on it next summer. I have a few home reno's I need to get through first . .
Ralph Curtis Hi Ralph... no prob... Send some pics when you get it done. What kind of home renos? I ask because we are thinking of doing a number of videos soon with tips and tricks for many renovation oriented projects.
Country Life Projects & Living If you did some additional video's on Renovation that would be great, I'd watch for sure . . . We are planning on renovation the kitchen, floors to doors, and the bathroom, tiles and sinks.
I am also planing on redoing 2 patio decks,which are 4x8 so it's not a big deal. I use to build decks with my dad on Cape Cod so I know my way around a tape measure, but it's been so long since I've done anything that refreshers are always a plus . .