Part #16245100_29. 16207901_5 only. And just keep jumper wire in place port 4 and 8. until u finish programming all of the keyfobs u will plant to use. Wen u r done with the las key fob. Remove jumper wire.
I still have my factory key fob that has seemed to quit working I have put extensive sound deadening n my Truck and wondering if I could be blocking the sensor maybe? Where is the sensor located? Also could my factory key fob lose its 'link'? Thanks man tired of using my key to unlock truck manually
If ur inside the truck does it work? If so then maybe the sound deadening stuff is blocking it. But check your key fob battery. It wouldnt hurt to try and reprogram it. Hope u figure it out
Remove the cover on the fob and pop the rubber cover off the board. If the buttons have left black residue on the board contacts, clean it off, alcohol or electronics cleaner. snap back together and check if it works.
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
I did mine using the info in this video and had no trouble. Thank you. I appreciate you sharing this valuable tip.
Thank you for posting this. Worked on my 99 K2500 Suburban.
Quick and easy , thanks for the vid
Works perfectly!!! Thanks
BTW I watched your video and performed the program in less than 4 minutes.
Villa Marina JC
Villa Marina JC
Thanks bro. Worked great.
Im glad it did.... 👍
Do you have a link to the correct keyless entry because I can’t find one with the same number on amazon
zalem. if it didnt do anything. ur vehicle may not be equiped with keyless entry. or just make sure part numbers match with thw ones above I stated.
and part # listed above, only will work.
yes. as long that is the same year. and part #
zalem.. make sure ur vehicle is equipped with keyless entry.. if its not equipped, wont work.
I have a key fob room my 03 GMC envoy would it work in my 97 Silverado
I still have my factory key fob that has seemed to quit working I have put extensive sound deadening n my Truck and wondering if I could be blocking the sensor maybe? Where is the sensor located? Also could my factory key fob lose its 'link'? Thanks man tired of using my key to unlock truck manually
Daniel Harrell im not sure were it is. Im assuming. Its on the ingniton assembly. Or something. Not sure. But try a new battery for ur keyfob.
If ur inside the truck does it work? If so then maybe the sound deadening stuff is blocking it. But check your key fob battery. It wouldnt hurt to try and reprogram it. Hope u figure it out
Remove the cover on the fob and pop the rubber cover off the board. If the buttons have left black residue on the board contacts, clean it off, alcohol or electronics cleaner. snap back together and check if it works.
and chek the s
fuse box.
Where do I buy those key fobs
Got mine on ebay.
I jumped 4 and 8 and won't do anything..
You ever figure out the problem?
Same
Same
How about 2000 pins don't match
David Minervini different after early 99 models
2000 yukon?
Some people shouldnt upload videos if u cant keep camara from moving
Will this same step program the truck, too?
Yes
I think not. but try it..
please help