We really beefed things up with the 2020+ fobs and went with true metal accents after receiving feedback on the 2015 style from valuable customers like yourself!
Thanks for the discount code Matt! Got my new 2020 fob in and it works great! For those having issues programming in 99-07 truck/SUV, there are actually 2 ways to enter programming mode. In some vehicles, turning ignition on/off/on/off will result in locks cycling, but the truck wont actually program any fobs. You need to turn ignition from Run/Accessory/Run/Accessory. Locks will cycle, hold both buttons on fob down for 15 seconds, locks will cycle again. Turn ignition to Run, then off, truck will chirp to exit programming mode. This was done in my 2003 Silverado 2500HD.
@@Tia_kittygrrr do you use the factory fob or an aftermarket fob that came with the remote start kit? If it's factory fob, then the remote start kit is just looking for a lock pattern (usually either lock>unlock>lock like Matt's Tahoe, or lock x 3) and you can use any fob that will transmit to your Escalade, like these new style ones from Boost Auto. If this is the case, I highly suggest the 2020 style fob. I absolutely love it compared to the junky factory fobs our vehicles came with.
The new key Strats the Z71?!? 💪💪💪 My Z71 is from 2002, will it work too? Ur the best Matt... if i would life in USA i am ur Neighbor💪😁 Best regards from Germany
@@mariodorder322 no the new fob won't give you remote start. His does because he installed a remote start kit wich plugs into the computer he has a video on this. None of the stock full size GM trucks from 99 to 07 had remote start it was introduced in late 07 with the new body style.
This video made me order one and I love it!! Price is a drop in the bucket to the small stuff that makes me love my truck. Small quality stuff like this makes your older vehicle feel not so old.
I want your Yukon. Mine is my only vehicle without a sunroof. We don't use ours enough to invest in the newer fobs (bought to pull a travel trailer) but my pleasure is in showing my wife that I can do some electronic things competently. I followed your instructions and it work like electronic magic..
@@mariahpotter2848 you don't, because that's not a later model. gmt800's still route starter relay power through the ignition, the "old school" way. Only tip-to-start or push-to-start vehicles have remote start capabilities from the factory, since the ECU sends a signal to the starter relay, not your ignition. Matt has an aftermarket kit installed in his Tahoe. You can find plug-n-play kits for 03+ online that just make you press the lock/unlock buttons in whatever pattern they chose.
I love this little upgrade idea! however i may be selling my 03 suburban some kid t boned me and was not insured. i got the truck nice and fixed up for cheap but the door they iinstalled just doesnt sit right and my wife wants a fuel efficient suv so i may be parting ways with my baby. I'll always stay subscribed so i can reminisce on when i had mine.
My 2003 1500HD won't program. Even though i got the 03-07 fob. Tried a dozen times. Nothing. 65 bucks wasted down the drain. Boost auto are overhyped crap only TH-camrs who were paid to sponsor them say good things about them
Thanks for this video. I ordered the fob for my 2007 Silverado. It works great. I used your code to purchase. I left them a 5 star review but I did mention that they needed to give instructions with the fob. I had to come back to your vid to learn how to program it. Which is not a problem. Thanks again.
Yup I care, my stupid upgrade will be here tomorrow. Got the 2015 fob for my rust free 2002 Silverado 2500 HD from your first fob upgrade video. Price plus Pa. Sales tax was $51.98 from Boost Auto Parts….wish I would have been aware of the newer fob.
I don't own a GM vehicle but im glad I watched this because I could've yold someone that "Yeah the newer fabs work with your old truck I saw it on TH-cam" and the person goes and waste money on a normal fob and doesn't work. Now I can saw you need a special fob that'll work.
Stumbled upon the new T/A merch when I was ordering a couple hats and stickers last, you gotta show off the merch at the end of the video or something so people order them
What is better about this key fob, other than the fact that it's fancy and beefier...?.. does the proximity work more, I find that my old key fob sucks and I can only lock or unlock the car from like 10 ft away, otherwise it just doesn't work
I have the first boost auto fob. After 7 months the chrome came off. I just bought some cheap eBay cases for the newer fob and swapped the chrome sides. That’s my only beef with it honestly. I like the 2020 style but $65 is too salty. I’ll wait for a sale.
Thanks for the update i ordered one of the fobs and seen the plastic on yours was beat up luckily i used to own a 2019 gmc and the metal sides snapped right on
I asked my dealer about buying a new original fob. They wanted almost $500 for it including programming to the car. That´s a lot for that little plastic thing... I´m in Europe so it´s probably cheaper in the US but $64 sounds really good :)
I have a 2020 Tahoe with 89000 original miles on her. I saw your first video for the older key fob and I got two. After a couple of months they both stopped working. I tired to re program them and for some reason the lock and unlock didn't work. The panic kept working. Got in touch with Boost and they sent me two new ones at no charge and they have been working good. Only thing is the range on them aren't so good for the lock and unlock but the panic button has great range. I might try the new style once these die. Thanks for you videos as i get a lot of info and how to do from them to keep my Tahoe running and looking good
What he neglected to mention is that you will need to purchase a programmer if you own a vehicle such as a 2013 Yukon or you won’t be able to program the fob to your vehicle. I understand most newer vehicles don’t require the use of a programmer so it’s a good idea to determine if your vehicle requires one.
Hey Matt! Thanks for the awesome content, as always. I was wondering if you’ve noticed any difference in the distance you can lock/unlock at compared to stock. I don’t get a lot of distance with the stock fob, and I’d be gung ho for this upgrade if it added a few feet. Thanks again!
Anyway you could post a size comparison between the original key fob and the 2020? I love the looks of the new one but also like how slim and small the older style fits in my pockets while at work
Now you should see if you can get a retro fit power liftgate kit to work on this model. I'm looking at a 2017 retro fit liftgate for a terrain I'm thinking about doing.
I love the idea of getting an upgrade at the same time I would like to know if the rage of it is better than the original one can you be further away from the Truck
i ended up getting a 2015 style fob and using a key fob case from AJT Designs. got tired of the cheap gm fob and the buttons wearing off. feels more rugged so far.
Hey I know this is a GM video , but I was curious does this work if you wanted to upgrade a Chevy key fob from 2017 to 2022? And where would I go about that?
Also not sure if it's 2001 Tahoe specific but the panic button can't be pressed twice to turn it off. The key has to go in the ignition and start to disable.
I didn’t even know that disable panic function existed. I read this comment and thought maybe that’s my problem too on my 01 Burb but nope. I tested it and works. Weird that it doesn’t work for you
I tried the upgrade key fob but for whatever reason it didn’t work for my 04. I like the newer key fob. I may have to take it somewhere to get it done idk. But like always good video Matt. Can’t wait for more man.
Twice now on trucks I’ve had, when the truck wouldn’t enter programming mode, I’ve had to replace the passenger power window switch. Once I did that, it worked no problem.
Does the vehicle have to have remote start built in previously in order for it to work without having the button on the remote? Or does the remote “automatically activate “ it , cause I have the same ole fisher price remote with just lock, unlock and panic like yours did
I had seen somewhere that you had to have a fob already to program another? Not sure how true that was but I picked one up from oreilly's since my '04 silverado didnt come with one and i could never get it to work.
Foolish question. You still need the physical key right? Nervous to take the plunge given I probs can’t just keep the key in the ignition or cup holder
OK so I just watched most of your video.... And I noticed you pressed Lock unlock lock.... For the remote start..... My 2011 Silverado factory key fob... Is that a feature I didn't know about.... Lock unlock remote start ????
The key of a 2010 silverdo has to be programing or just go to lock smith an make a copy because i had an 2003 cadillac escalade and just made copy and i didnt had to do anything just like a regular key copy
I just purchased a 2009 Chevy Silverado LTZ and would love to upgrade from the fisher price fob. I'm curious if upgrading to the 2015 or 2020 models from Boost will increase my remote start range - or are these fobs a cosmetic upgrade only? Sorry if this has already been asked, I went through the comments and did not see this information but saw several people asking about this. Kenny
Can confirm that the real 2015 and 2020 fobs will not work with older trucks. I did this when the 2015 fob came out and bought a real fob with chevy logo on it because it was 15 dollars cheaper and it would not pair. At that point I gave up and have been running the stock fobs until I saw this and just ordered a 2020 fob from boost auto and can't wait!
I've been saying for ten years that someone should have come out with a newer looking style fob for older cars / trucks. Didn't realize someone had done it... Fkn A I didn't catch it if you mentioned, but... do these one's have any better of a transmit radio in them? Any better range?
Just ordered mine and am curious to find out as well. But I definitely think its worth it even if its the same range because of the nicer feeling buttons.
My only thing is when programming th key fob do I have to do it the way you did? Because on my Escalade it has a menu selection for me to relearn my key fobs
Received mine programmed and works fine however I'm curious if the remote start already has to be installed on the vehicle or will these remotes just do it after programming cause I can't get mine to work I have a 2004 escalade
Use coupon code LSXMATT to save 20% off your new fob!
Guess the code isn’t valid for the fob with remote start?
worked when I tried it just now.
Can You giveme the number model part?
LSXMATT Code is not working for either FOB??
Code not working for me either 😕
We really beefed things up with the 2020+ fobs and went with true metal accents after receiving feedback on the 2015 style from valuable customers like yourself!
Would these be comming to gmt400s?
could you make something that looks like the gmt 900 or k2xx cadillac key for gmt 800 escalade owners?
Wish the s10 platform had one
@@andrewmattera6205 I'll let the development team know of the interest!
I wanted to get one for my 02 Silverado earlier this week but it's out of stock. I'm looking forward to when they do come back around.
Thanks for the discount code Matt!
Got my new 2020 fob in and it works great! For those having issues programming in 99-07 truck/SUV, there are actually 2 ways to enter programming mode. In some vehicles, turning ignition on/off/on/off will result in locks cycling, but the truck wont actually program any fobs. You need to turn ignition from Run/Accessory/Run/Accessory. Locks will cycle, hold both buttons on fob down for 15 seconds, locks will cycle again. Turn ignition to Run, then off, truck will chirp to exit programming mode. This was done in my 2003 Silverado 2500HD.
I have an 06 Escalade with aftermarket remote start so that old broken fob is all I was told I could use... ugh . Any knowledge on that?
@@Tia_kittygrrr do you use the factory fob or an aftermarket fob that came with the remote start kit? If it's factory fob, then the remote start kit is just looking for a lock pattern (usually either lock>unlock>lock like Matt's Tahoe, or lock x 3) and you can use any fob that will transmit to your Escalade, like these new style ones from Boost Auto. If this is the case, I highly suggest the 2020 style fob. I absolutely love it compared to the junky factory fobs our vehicles came with.
I’m working with Boost Auto Parts to set up a discount on the fob! Should have a special link set up in a day or so.
The new key Strats the Z71?!? 💪💪💪
My Z71 is from 2002, will it work too?
Ur the best Matt... if i would life in USA i am ur Neighbor💪😁
Best regards from Germany
Follwing
Don't see the link for the upgrade remote ...
@@mariodorder322 no the new fob won't give you remote start. His does because he installed a remote start kit wich plugs into the computer he has a video on this. None of the stock full size GM trucks from 99 to 07 had remote start it was introduced in late 07 with the new body style.
I would like the information if you do?.
This video made me order one and I love it!! Price is a drop in the bucket to the small stuff that makes me love my truck. Small quality stuff like this makes your older vehicle feel not so old.
I want your Yukon. Mine is my only vehicle without a sunroof. We don't use ours enough to invest in the newer fobs (bought to pull a travel trailer) but my pleasure is in showing my wife that I can do some electronic things competently. I followed your instructions and it work like electronic magic..
For the record, they offer a option with remote start for the later models but those require scan tool programing.
How do I get that done on my 04 suburban?
@@mariahpotter2848 you don't, because that's not a later model. gmt800's still route starter relay power through the ignition, the "old school" way. Only tip-to-start or push-to-start vehicles have remote start capabilities from the factory, since the ECU sends a signal to the starter relay, not your ignition. Matt has an aftermarket kit installed in his Tahoe. You can find plug-n-play kits for 03+ online that just make you press the lock/unlock buttons in whatever pattern they chose.
I am thinking about getting a 13 avalanche with remote start and missing it's fobs, but has a key. Will these work on it?
Just got two of them in the mail, just programmed both in less than 5 minutes. It’s going to be nice to have remotes again.
I love this little upgrade idea! however i may be selling my 03 suburban some kid t boned me and was not insured. i got the truck nice and fixed up for cheap but the door they iinstalled just doesnt sit right and my wife wants a fuel efficient suv so i may be parting ways with my baby. I'll always stay subscribed so i can reminisce on when i had mine.
For some reason my 99 Chevy Silverado 1500 isn’t letting me program it any help?
My 99 GMC Sierra the same.
My 2003 1500HD won't program.
Even though i got the 03-07 fob.
Tried a dozen times. Nothing.
65 bucks wasted down the drain.
Boost auto are overhyped crap only TH-camrs who were paid to sponsor them say good things about them
I just picked up a GMT800 and I'm already re watching a bunch of videos because I have the same problems. Thanks!
Fobs are vital to the feeling & mental aspect of owning/driving. For the Hummer, it needs a fob to match the feel of the vehicle.
Thanks for this video. I ordered the fob for my 2007 Silverado. It works great. I used your code to purchase. I left them a 5 star review but I did mention that they needed to give instructions with the fob. I had to come back to your vid to learn how to program it. Which is not a problem. Thanks again.
Yup I care, my stupid upgrade will be here tomorrow. Got the 2015 fob for my rust free 2002 Silverado 2500 HD from your first fob upgrade video. Price plus Pa. Sales tax was $51.98 from Boost Auto Parts….wish I would have been aware of the newer fob.
I don't own a GM vehicle but im glad I watched this because I could've yold someone that "Yeah the newer fabs work with your old truck I saw it on TH-cam" and the person goes and waste money on a normal fob and doesn't work. Now I can saw you need a special fob that'll work.
why? The GMT800 vehicles have the ability to program other fobs. Why is the one from boost needed?
How did you get the remote start like that i also have a tahoe
Stumbled upon the new T/A merch when I was ordering a couple hats and stickers last, you gotta show off the merch at the end of the video or something so people order them
Do the same steps apply if you have a aftermarket alarm system on it? Or do you need to do something extra to program it to the alarm
What is better about this key fob, other than the fact that it's fancy and beefier...?.. does the proximity work more, I find that my old key fob sucks and I can only lock or unlock the car from like 10 ft away, otherwise it just doesn't work
Does the new key fob have increased range, compared to the other 2?
I'm definitely gonna get that. My 05 Tahoes original died years ago from the sweat in my pockets. Really hating using the damn key all the time
I have the first boost auto fob. After 7 months the chrome came off. I just bought some cheap eBay cases for the newer fob and swapped the chrome sides. That’s my only beef with it honestly. I like the 2020 style but $65 is too salty. I’ll wait for a sale.
Use the code and save 20%
My whole family has been in need of these for awhile, thank you for the vid!
Thanks for the update i ordered one of the fobs and seen the plastic on yours was beat up luckily i used to own a 2019 gmc and the metal sides snapped right on
I asked my dealer about buying a new original fob. They wanted almost $500 for it including programming to the car. That´s a lot for that little plastic thing... I´m in Europe so it´s probably cheaper in the US but $64 sounds really good :)
I see you did the remote start. Is the remote start a upgrade as well?
Aftermarket kit that's wired into the truck. The truck has no way from the factory to start the engine without use of the ignition.
I'm going to get one of this. Seem like a good time to replace the original key fobs on my 06 Silverado. Hopefully they last as long as the originals.
I have a 2020 Tahoe with 89000 original miles on her. I saw your first video for the older key fob and I got two. After a couple of months they both stopped working. I tired to re program them and for some reason the lock and unlock didn't work. The panic kept working. Got in touch with Boost and they sent me two new ones at no charge and they have been working good. Only thing is the range on them aren't so good for the lock and unlock but the panic button has great range. I might try the new style once these die. Thanks for you videos as i get a lot of info and how to do from them to keep my Tahoe running and looking good
its a 2000. my bad. lol
Just wanted to say I like the new music you put in here.👍
Keep up the good work Matt!
I'm interested in that remote start? Will it work on any truck
Mine comes in today I got the 2020 style and I’m pumped
What he neglected to mention is that you will need to purchase a programmer if you own a vehicle such as a 2013 Yukon or you won’t be able to program the fob to your vehicle.
I understand most newer vehicles don’t require the use of a programmer so it’s a good idea to determine if your vehicle requires one.
I have a 201r yukon so I would need a programmer? That's an extra 50
Your remote start. Who you use for that? I have 06 suburban I want to do that
Hey Matt! Thanks for the awesome content, as always. I was wondering if you’ve noticed any difference in the distance you can lock/unlock at compared to stock. I don’t get a lot of distance with the stock fob, and I’d be gung ho for this upgrade if it added a few feet. Thanks again!
What remote start kit do you have?
Anyway you could post a size comparison between the original key fob and the 2020? I love the looks of the new one but also like how slim and small the older style fits in my pockets while at work
How did you get your remote start setup like that?
Now you should see if you can get a retro fit power liftgate kit to work on this model. I'm looking at a 2017 retro fit liftgate for a terrain I'm thinking about doing.
What did you have to do to add remote start?
Following
Hey do you have a vid on the remote start install?
A vid on changing the battery or will it be the same as an original 2020 key fob
I love the idea of getting an upgrade at the same time I would like to know if the rage of it is better than the original one can you be further away from the Truck
I like the thin and sleek Fisher Price key fob better. I have a 2018 Sierra and hate the newer larger and boxy fobs.
i ended up getting a 2015 style fob and using a key fob case from AJT Designs. got tired of the cheap gm fob and the buttons wearing off. feels more rugged so far.
Just ordered mine, didn't know they were located in chicago! Will arrive in 2 days 🙏 🤲
I need to watch this video again when I get home thanks for the info I ordered the 20202 for my 08 Chevy suburban should be there when I get home
Does upgrading the remote give you a keyless start option or do you need to already have keyless start installed ?
On the 2007+ GMT900/910, but it does require scan tool programming.
Just ordered mine and used the 20% off code LSXMATT , thanks. Can’t wait to get it!👍
Do these give you any more range from the stock fisher price ones??
Bro thank you for the info I just bought one for my hummer h2 it works perfect 👍🏼
Will this work on the gmt400 (1998)
Random question is that a gmc air bag with a checy logo in it?
The range on the "new" fob isn't the same. (Shorter range)
Is the "newest" one better?
Hey I know this is a GM video , but I was curious does this work if you wanted to upgrade a Chevy key fob from 2017 to 2022? And where would I go about that?
Also not sure if it's 2001 Tahoe specific but the panic button can't be pressed twice to turn it off. The key has to go in the ignition and start to disable.
Thats strange I never had that issue before!
I didn’t even know that disable panic function existed. I read this comment and thought maybe that’s my problem too on my 01 Burb but nope. I tested it and works. Weird that it doesn’t work for you
What about universal key fobs have you tried one?
Will it work on the 2015 chevy captiva ltz?!😊
I normally put a silicon case from eBay or Amazon in my new key fobs, keeps them from getting all faded and beat up cosmetically.
Pretty cool though, I might upgrade from my fisher price 🤣
I had to do that for Cadillac key fobs that the rubberized coating fell off of. The cheap silicone covers look like new like 2+ years later.
so does this mean the smaller / older fobs can be used with the newer trucks as well?
How do you make the remote start work did you do that yourself or does it automatically do it?
Does that work on all 01 or you programmed it to remote start
I want one but do i need to purchase a programming tool for my 2012 chevy tahoe?
I watch ur videos for these key fob upgrades I have a 2011 silverado so what do I need for the upgrade
Hold up your Tahoe has factory remote start? When did they start that? I have 2002 Cadillac Escalade but not sure if mine has that
What year is your car? Did you add your own remote start?
I have a 2018 Sierra and I can’t get the locks to cycle holding down the unlock button
I tried the upgrade key fob but for whatever reason it didn’t work for my 04. I like the newer key fob. I may have to take it somewhere to get it done idk. But like always good video Matt. Can’t wait for more man.
Twice now on trucks I’ve had, when the truck wouldn’t enter programming mode, I’ve had to replace the passenger power window switch. Once I did that, it worked no problem.
@@chrish1311 that’s insane! I mean a 2004 Tahoe is old but I guess I never knew that about the switch.
@@keyboiz916 yeah, I don’t even remember what made me try it. But it fixed my problem. I’m thinking I read about it on one of the old forums.
@@chrish1311 I appreciate the feed back man. Thank you
Does the vehicle have to have remote start built in previously in order for it to work without having the button on the remote? Or does the remote “automatically activate “ it , cause I have the same ole fisher price remote with just lock, unlock and panic like yours did
I noticed the remote start on the "original key fob" how did u make that happen I have a 2005 escalade and I was curious....
I had seen somewhere that you had to have a fob already to program another? Not sure how true that was but I picked one up from oreilly's since my '04 silverado didnt come with one and i could never get it to work.
Foolish question. You still need the physical key right? Nervous to take the plunge given I probs can’t just keep the key in the ignition or cup holder
OK so I just watched most of your video.... And I noticed you pressed Lock unlock lock.... For the remote start..... My 2011 Silverado factory key fob... Is that a feature I didn't know about.... Lock unlock remote start ????
Do you know if there is one i can upgrade on my 2008 Cadillac Escalade
will this make it easier to lock/unlock/rem start from a further distance?
The key of a 2010 silverdo has to be programing or just go to lock smith an make a copy because i had an 2003 cadillac escalade and just made copy and i didnt had to do anything just like a regular key copy
Will the remote start work on aftermarket auto start kits?
You said ‘99. My ‘99 Tahoe uses the paperclip to go into setup mode or is what you showed specific for the new fob?
I just purchased a 2009 Chevy Silverado LTZ and would love to upgrade from the fisher price fob. I'm curious if upgrading to the 2015 or 2020 models from Boost will increase my remote start range - or are these fobs a cosmetic upgrade only?
Sorry if this has already been asked, I went through the comments and did not see this information but saw several people asking about this.
Kenny
Can confirm that the real 2015 and 2020 fobs will not work with older trucks. I did this when the 2015 fob came out and bought a real fob with chevy logo on it because it was 15 dollars cheaper and it would not pair. At that point I gave up and have been running the stock fobs until I saw this and just ordered a 2020 fob from boost auto and can't wait!
Maybe not yours. I had 2 work for my 96 Silverado. Both the 2015 key fob from boost. Have to put paper clip in the obd2 port to program it.
It’s been a while Matt. I’m gonna upgrade my fob that you just purchased. (2020)
Will it program to auto start my 2004 XLT Yukon 5.3L?
Kevin
How do I know if my silverado 2500 cam with keyless entry
Can you get these to auto start the truck?
Did you install the remote start aftermarket?
What remote start are you using?
I've been saying for ten years that someone should have come out with a newer looking style fob for older cars / trucks. Didn't realize someone had done it... Fkn A
I didn't catch it if you mentioned, but... do these one's have any better of a transmit radio in them? Any better range?
Just ordered mine and am curious to find out as well. But I definitely think its worth it even if its the same range because of the nicer feeling buttons.
Do you have a aftermarket alarm remote where the new fob works
The Hummer H3 line is currently not compatible with these fobs according to the phone call I made to boost auto parts, in case anyone was wondering
$50 key fob for lock unlock I think I'll get a 1/2 a tank of gas ! Haha Matt love the channel did you put the hydroboost on the tahoe ?
Can you please demonstrate how to program a 2021 silverado custom fob. I lost my husband’s and would like to replace it.
Lsxmatt i see on there it doesnt come with remote start for the 03 model tahoe
Dumb question but that remote start feature will it work on my 2003 Tahoe LT or that wasn’t available for that year?
Im gonna need one for sure it looks cool
Hi can you use this programing technique with a 2020 Chevy Silverado with a keyed ignition ?
Is the range better than the older one?
Do you happen to know if this works on a 02 avalanche?
My only thing is when programming th key fob do I have to do it the way you did? Because on my Escalade it has a menu selection for me to relearn my key fobs
So I have a prostart aftermarket car starter. Can I incorporate it into this for so 1 fob does it all?
Received mine programmed and works fine however I'm curious if the remote start already has to be installed on the vehicle or will these remotes just do it after programming cause I can't get mine to work I have a 2004 escalade
Nice feature/upgrade. Checking it out now. Thanks!
I have an aftermarket remote start on my 2006 sierra. Will the upgrade fobs retain that function?