How to program a GMC Yukon remote key fob 1997 - 1999
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2019
- An easy to follow video on how to program a remote key fob for a 1997 - 1999 GMC Yukon.
More free keyless entry programming instructions available at www.ProgramYourRemote.com/
1. Locate Data Link Port. It is located under dash on drivers side. Be sure you know which pins are 8 and 4.
2. Make sure there are metal contact pins in terminals 8 and 4. Connect 8 to 4 with a suitable jumper wire ( leave the jumper wire connected throughout the programming procedure). Make sure you know which terminals are 8 and 4. The vehicle will respond by locking and unlocking the doors to signify entering of programming mode.
3. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed and after about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release buttons on remote.
4. Within one minute, repeat step 3 on the remaining remotes to be programmed.
5. Remove jumper wire applied to OBDII port. - ยานยนต์และพาหนะ
Awesome and very precise step by step lesson. I'm a licensed locksmith and your vid was spot on.
Thanks!
Excellent video. Thanks!
You're welcome!
Very helpful!!! Appreciate the video
Glad it helped!
It works out!!! ❤
Thank you sir about your information . Once i take wire to conecred with obd . Am not found any improved no respand from sentor lock . So what dose it mean ??
If you are getting no response after inserting the wire, there is a good chance the vehicle is not set-up for factory remotes.
@@PYR-Auto
Thank u sir for your feed back
Can u please give me the idea
What can i do ?
@@PYR-Auto
I will tell u what happen with my car from the begining
Ihad smole accedent on driver door after fixed i face the issue
I go to elicteric tech to solve the issue he side every thing fine axepet one insturment device is name : remote function control modual no power . So u have to replace with new one
After that i bering the same devise and also not woking today i breing another one and i will see if there is improve or not and then i will ahere it with u .
Thanks alote .
You may have a blown fuse. If you check fuse diagram you'll be able to find keyless module fuse. Once found, inspect and replace. NOTE: fuse may look fine but don't be fooled, replace it anyway. Then try to program with jumper wire again. Make sure you are programming correct remote as there are many look alike remotes but for different years and models.
@@thepeoplesreviewer7164
Thank you my dear i replace the cntrol locke inside dach pored and then sys back to normal thank you sir 👍
doors lock and horn beeps. Alarm will not sound when you open a door. What to do?
Need help on 01 yukon the hold the unlock button don't work, hear it enter program mode
If the vehicle is entering programing mode but the remote is not responding, there may be an issue with the remote you are using.
My vehicle enters the programming mode but doesn’t do anything when I hold down the unlock and lock buttons
If the vehicle enters programming mode but will not respond to the remote - there may be an issue with the remote you are using
I had the same problem at first. Try a different remote
@@Dewaynemckynzi yes that worked I had the wrong key number or something ended up getting the right key number
Mine does not have the 8th pin
It has the slot but it's blank
That indicates that the vehicle does not have the factory remote option.
@@PYR-Auto what does that mean?
Do I need to turn on the car ?
no
نبغا تشغيل عن بعد جمس 1995
This will not work on a 1995 Yukon.
هاذا امريكي ما يعرف عربي