Thank you for the this vid. I need to buy a 50uA panel meter. I am building an ESr meter that required a 50uA and 10K potentiomenter. I'd like to buy this meter instead a 50uA panel. In order to accommodate my ESR PCB inside take advantage of the battery port connectors, Potentiomenter etc. Someone here know about the details, I have the schematic but very low quality that I can't read.
Hi . thanks for your comment sorry i did not see it till today As for using this meter for the meter part only It is extremely accurate meter and it will work great But the circuit that you are making you have to set it up and calibrate it in a correct way in order to drive the needle correctly and in order not to damage its internal coil. As for the schematic , I apologize. I did not understand any schematic you mean I wish you success Note: Please like and subscribe to the channel in order to receive notification of any new video that we publish
This Sanwa Multimeter is the worse I have seen because when I have bought the first one it can't be adjusted to zero in the Ohm's measurement; Also its cannot be adjusted to NULL in the VDC(NULL) function. Then I bought the second unit exactly the same and the problem happened again. Sanwa seen doesn't improve and solved this problem at all. I think its a NUMBER TEN product.
Hi thanks for your comment As for this multimeter i think it is working and working will as you seen in the video i dont know about Previous versions of production if thay had the proplem that you talk about the only thing that i dont like is capacitors rang its a joke in a future video i will make many modification in this set in order it can work more efficiently so stay tune to that Please like and subscribe in order you get all my new videos .
Hey, you should replace the battery before adjusting to zero. If it can't be adjusted to zero, it means the battery is low in it. Sometimes it can't give constant value for resistance because of the high current and it drops voltage in battery and the ohm value goes bigger in time because of the current goes down by time. It gives ohm value by current in circuit and sometimes it can give bigger ohm value or can't be zero because of the low current if the batteries inside are empty. You just replace with new battery.
@@circuitblog01 also it actually did work well on capacitors. As they mentioned in introduction, the indicator can down by time, you should read the maximum value, not the number that indicator jump on. Also you should do short cut the capacitor tips before measure it. Indicator jumped first but then went to 1uF and slowly down by time. But if it stays somewhere in the middle when droping, even though you do discharge with short cut before testing, this means there is leakage in your capacitor.
@@KKoKoRR Hi . Thanks for the comment In fact, yes, he did the measurement as in the manual and I notice how it measure the 1uf capacitor, but according to the manual he can measure capacitors with a size of 0.1uf. but win i try to measure the value the meter did not move at all so in the futuer i will post series of videos about many circuits that i will add to this multimeter that will make it performance more superior. In fact, I like this meter and the accuracy of the measurement is great, but the method of measurement for capacitors and the circuit implemented is impractical and limited by specific values. Please, like and subscribe to receive a notification when we post any new videos.
@@KKoKoRR Hi .Thank you for comment the battery is in excellent condition, and you can know that the batteries are in good condition or need to change by placing the switch on the option x 1 ohm and try to zero it in the event that it is set zero and continue on this situation when short out the probes again this means the batteries are good And if you look at my previous videos, you will notice that I am using a Chinese version of Sanwa yx360tr and for this I can accurately judge his work in the blink of an eye.
Thank you for sharing!
Hi thanks for your comment
Iam glad you like it
Thank you for the this vid. I need to buy a 50uA panel meter. I am building an ESr meter that required a 50uA and 10K potentiomenter. I'd like to buy this meter instead a 50uA panel. In order to accommodate my ESR PCB inside take advantage of the battery port connectors, Potentiomenter etc. Someone here know about the details, I have the schematic but very low quality that I can't read.
Hi . thanks for your comment sorry i did not see it till today
As for using this meter for the meter part only It is extremely accurate meter and it will work great But the circuit that you are making you have to set it up and calibrate it in a correct way in order to drive the needle correctly and in order not to damage its internal coil. As for the schematic , I apologize. I did not understand any schematic you mean I wish you success Note: Please like and subscribe to the channel in order to receive notification of any new video that we publish
This Sanwa Multimeter is the worse I have seen because when I have bought the first one it can't be adjusted to zero in the Ohm's measurement; Also its cannot be adjusted to NULL in the VDC(NULL) function. Then I bought the second unit exactly the same and the problem happened again. Sanwa seen doesn't improve and solved this problem at all. I think its a NUMBER TEN product.
Hi thanks for your comment
As for this multimeter i think it is working and working will as you seen in the video i dont know about Previous versions of production if thay had the proplem that you talk about the only thing that i dont like is capacitors rang its a joke in a future video i will make many modification in this set in order it can work more efficiently so stay tune to that
Please like and subscribe in order you get all my new videos .
Hey, you should replace the battery before adjusting to zero. If it can't be adjusted to zero, it means the battery is low in it. Sometimes it can't give constant value for resistance because of the high current and it drops voltage in battery and the ohm value goes bigger in time because of the current goes down by time.
It gives ohm value by current in circuit and sometimes it can give bigger ohm value or can't be zero because of the low current if the batteries inside are empty.
You just replace with new battery.
@@circuitblog01 also it actually did work well on capacitors. As they mentioned in introduction, the indicator can down by time, you should read the maximum value, not the number that indicator jump on. Also you should do short cut the capacitor tips before measure it. Indicator jumped first but then went to 1uF and slowly down by time. But if it stays somewhere in the middle when droping, even though you do discharge with short cut before testing, this means there is leakage in your capacitor.
@@KKoKoRR
Hi . Thanks for the comment
In fact, yes, he did the measurement as in the manual and I notice how it measure the 1uf capacitor, but according to the manual he can measure capacitors with a size of 0.1uf. but win i try to measure the value the meter did not move at all so in the futuer i will post series of videos about many circuits that i will add to this multimeter that will make it performance more superior. In fact, I like this meter and the accuracy of the measurement is great, but the method of measurement for capacitors and the circuit implemented is impractical and limited by specific values.
Please, like and subscribe to receive a notification when we post any new videos.
@@KKoKoRR
Hi .Thank you for comment the battery is in excellent condition, and you can know that the batteries are in good condition or need to change by placing the switch on the option
x 1 ohm and try to zero it in the event that it is set zero and continue on this situation when short out the probes again this means the batteries are good And if you look at my previous videos, you will notice that I am using a Chinese version of Sanwa yx360tr and for this I can accurately judge his work in the blink of an eye.
👎ya.ya.ya.
🙂