Oily water separator || Oil control monitoring system ||

What is Oily water separator
Details construction of oily water separator
working principle of oily water separator
Oil control Monitoring system
15.ppm Device
oily water Separator lecture 01
• Oily Water Separator |...
Marine Boilers
• Marine Boilers and Po...
Fresh water Generator onboard ship
• FRESH WATER GENERATOR
Hydrophore system onboard ship
• HYDROPHORE SYSTEM ONBO...
Marine Air Compressors
• Marine Compressors Q&A...
Marine Refrigeration and air conditioning
• Refrigeration and Air-...
Learn and Grow with Marine Etutor
/ @searainly

[@manjeetsahu6175]

Vikas sir! U are great🙏.your explanation is much much better than Marine faculties... I like the way u describe the topics..love u sir!!

[@searainly]

Thank you very much I always try my level best & thanks to u all for your love and support. 🙏

[@utsavchouhan5609]

There are not many channels teaching all these topics , great work sir!!

[@searainly]

Thanks for your love and support 🙌

[@lamborghinigl3979]

I don’t understand everything but from some English and your passion explained got good understanding, thank you for making the video.

[@sebastian.B0]

Thank you very much! Greetings from Romania.

[@AkashKumar-hf2yn]

Thanks for the explanation in simple and easy language sir.

[@searainly]

Stay connected

[@searainly]

Intensity of Light Increases or remains same when passes through a clear solution (less than 15 PPM.) &
Intensity of Light falls down when it passes with OWS sample.
Note 16:19 Intensity of Light Decreases when it passes through oil content sample.
Thank-you.

[@parthjotwani9621]

Great work!! Thanks for guidance!!!

[@ShoebChougleOfficial]

Good video.

[@AJEETKUMAR-nq1fz]

Thank you sir. Completed it.

[@mithaleshkumar2486]

Super explain sir...

[@hritikvasuja6250]

Superb sir👌

[@hardevsingh-cx1mw]

U r doing great job sir... Boosting our knowledge

[@searainly]

Always welcome

[@vaibhavmall8224]

Bahut badiya sir

[@shahlalkhan4402]

very conceptual lecture

[@shubhamsaini6743]

Nice explanation sir

[@khemchandkhattri8525]

very nice video sir

[@watsappstatus1895]

Super sir

[@kshitiz41]

Very nice explanation thank u sir... Kindly also explain Scattered light principle

[@anandashok4444]

Keep up the good work

[@searainly]

Thankyou

[@fazlerabbi3579]

very good explanation sir , love from bangladesh. go ahead sir .

[@searainly]

Thankyou & stay connected!!

[@sameerkumarprajapati8272]

Such a crystal clear explanation sir
It's really helping me in training phase
I request you to upload lectures on shafting topic.

[@searainly]

Sure 👍👍

[@princetandel6911]

Bahot badiya sir

[@deepaksinha6623]

Great sir from tmi

[@searainly]

Thankyou brother! stay in touch.

[@AshishYadav-hq5gg]

great explanation sir

[@searainly]

Thank you brother. & stay tuned

[@rashwathj9696]

Thank you sir

[@siddarthnashier9624]

Nice explained 👍🏻

[@searainly]

Thank you! Please do like share and subscribe to d channel!

[@yogeshpatidar9243]

Nice explanation sir🔥🔥👍👍

[@searainly]

Your welcome

[@sumittupe5546]

Very good explanation

[@searainly]

Thank you

[@tarunrajput1983]

Marvellous sirjiii…….plz upload turbocharger explanation with overhaul

[@searainly]

Stay connected and share it

[@shubhamupman7260]

Sir kya maasth padhate ho aap!! Thank you

[@searainly]

Thankyou

[@suryakrishna5954]

Sir I have read that the pump that tranfer oil water from Wells to holding tank,is reciprocating type and the one that tranfer the fluid from holding tank to ows is a mono screw pump is it right everytime or ship specific?

[@kanthamylapalli5898]

🙏👌

[@makerlife4103]

I have a doubt.
Initially When we fill water from overboard in the OWS using the centrifugal pump , wont the air inside the fist stage gets trapped at the top of the chamber ? I'm having this dount since the outlet of water from first stage is from the bottom of the first stage. And also there is no provision for that air trapped at the top of the chamber to vent. The capacitance probe will not sense oil in the oil chamber and hence will not open the pneumatic operated diaphragm valve.
As per the drawing you made, I think air will remain trapped at top
Please clarify. I have not yet worked on a vessel fitted with OWS and I'll soon be joining one .
Thanks in advance
By the way , excellent delivery and clear explanation
Regards

[@duraipandian1993]

Sir mentioned only coalescer filter works on stokes law,, but explain how the separation done in that filter, and finally explain about purpose of baffle plate.

[@hanisingh7909]

Sir please make on video about reversing of engine

[@searainly]

Ok

[@mritunjaykumarkumar241]

Please sir.. Make some video on steering gear which asked on mmd oral since there is no book available for sg... I will always humble for ur help

[@searainly]

Starts next week.....

[@akshaynalawade330]

Sir oil separated tank ka oil kaha pe jata h return back to bilge holding tank me jayega ya dusra tank me?????

[@yogeshpatidar9243]

Sir what is the work of baffles plate

[@SaifrifatRana]

Sir,how to measure scavenge performance?

[@sugarspicesatya]

Well expalined, Just clear this line, If the content is clear (i.e less than 15 ppm) what will be the intensity of light? And what will be the intensity of light if the contents is having more than 15ppm. In the video at 16:19 you said greater intensity for bothe cases. Please clarify.

[@searainly]

At 16:19 The intensity of Light Decreases not Increases. And the Intensity of light both cases depends on photoelectric current.i.e the strength of photoelectric cell.
If the light is fall on to the clear solution greater intensity
If the light is fall on to the OWS sample lesser intensity.(Because oil content is there).

[@usmanhaider3257]

Sir ap kindly thora sa diagram draw krne k bare mn quide kr diya krein.. q k diagram ko draw krna thora difficult lgta ha..

[@abhaypandey586]

Excuse me Sir Why heating of bilge is not done before going to gravity separation or during gravity separation . Since heating increases density difference?

[@searainly]

Yes heating arrangement is there in Integrated Bilge water treatment process prior to enter the ows.. Heating arrangement for the bilge primary tank to facilitate separation of oil.

[@MR-RAY..]

Sir do you provide private coaching??and sir do you sail in which post?

[@searainly]

Not now brother! For further technical doubt please contact on my Whatsapp/ insta. 8207528046/vikash.25897. Thank you.

[@_pushpak2510_]

sir kitni capacitance hoti hai,values please

[@satishmaurya8799]

Sir bilge pump is centrifugal or reciprocating ? Please clear ! I had read on Google It was centrifugal for greater flow rate ..

[@searainly]

Technically both Reciprocating as well as centrifugal pump can be used.The rate of flow provided by a reciprocating type is lesser than that of the centrifugal type.(But Reciprocating pump is self priming)
Nowadays centrifugal pumps are generally used as bilge pumps as they provide greater output rate and take lesser time for the pumping. But in some ships Bilge pump is Reciprocating pump Although it is lesser flow rate but it reduces day by day.
Thank you!

[@kaustavroy7004]

In few diagrams of oily water seperator in the internet I have noticed in the second stage filter there is no capacitance probe instead there is oil level sensor.
Can you please clarify

[@searainly]

IDK the exact reason... May be it's depends on manufacturer to manufacturer.

[@abulkashem4692]

What are actions to be taken if 15 PPM alarm comes repeatedly?

[@05.ankitapal42]

Sir where oil water separator located in ship??

[@sikandersameer8371]

Sar d calaging and qualty bre me btain

[@abulkashem4692]

What are the actions to be taken in case of failure of OWS?

[@selva-the-sailor77]

1.)Inform to the port state and flag state
2.) inform to the company
3.) Entered the date, time , location and vessel speed at when OWS fails to operate in Oil record book
4.) send that copy to company and flag state
5.) Start to rectify the causes of failure
6.) store all the bilges in bilge holding tank and keep monitor the tank sounding

[@devillucifer8531]

Pls do the explanation in hindi then ur subcriber will increase more

[@shahlalkhan1916]

Sircontrolswitchkiyahay

[@raomanishkath3417]

Sound/ voice of the video can be improved

[@venkatmadva5030]

Sir could u please explain in english

[@searainly]

Thank-you for your suggestion.

[@anuragsagar1674]

Abe yaar baar baar ppm bol rhe ho full form nhi bol sakte ho ek baar bhi .

[@sonalsrivas118]

@Anurag sagar bro yeah basic.h No one marine faculty is going to teach us what is full form of ppm. Jo iss context m baat ho rha wo understood h.Anyhow google kr lo tm.

[@manjeetsahu6175]

Parts per million (context ko smjho) itni confusion m kyu ho bhai?TBH Great Lecture 🙏🙏

[@searainly]

Are u Marine Engineer? If yes then.. Study hard and Please try to learn basic class 9th Physics👍👍I m Always ready to help u.

[@Deepak-en9kx]

Thanks for the explanation in simple and easy language sir.

[@searainly]

Your welcome