For the dust its actually fairly simple to take the entire thing apart, the screen is a cover that comes right off and you can just use a can of air or microfiber cloth to clean it every once in a while.
Hi, thanks for the video, it is really helpful. I have one question related to the rare camera: My car is a Lancer 2016 US/Canada version, Is the location of the backward light harness as well as the wire colour the same as your EVO X? I got a multimeter with me, when the backward light is on, what is the voltage between the "white" and the "Black" wire in the backward light harness? Maybe I can check it myself before installation. Many thanks for your help.
Went with the exact set up and with back up camera. Installed the stereo and it works great. However when I installed the back up camera stereo stays stuck displaying back up camera. Followed all steps exactly how you did it. What am I doing wrong?
Probably the power on to the camera is always on, you want to make sure its engaged only in reverse. Check your camera and how its connected to the reverse light
@@ikigaidriven I did it exactly how you did. I wired it to the reverse white wire and everything. It stays stuck on the camera even though it’s not on reverse. I went to Best Buy to have them check it out but they told me it’s wired to ACC
You connected the reverse signal in the front. But where did you connect the one in the back? Do you connect the red power cable together with the reverse signal cable in the back? I'm only asking because you only mentioned the one in front but not the one in the back and I want to put a reverse camera on my lancer. I just want to be sure 😅
Do you have the Rockford Fosgate audio? if I did have the Rockford fosgate audio system, if i select the SYGAV without the Fosgate audio system will it cause problems?
The only reason I dont buy one of those sygavs is the problem you mentioned with dust and moisture going into the display. Maybe the Dasaita ones have a better quality?
Thanks for posting this. I’m long for the upgrade but I don’t want to loose the ETACS function (lights, wiper etc). Do you know this unit retains those functions or they are gone for good? Thanks again!
That’s good to know. I’m not really technically inclined but I heard that you need some kind of connection to the CANBUS (at least that’s what I’ve been told). How did you make that connection? Does the unit come with the CANBUS wiring? Can you post a video about it? My apology for the stupid questions and appreciate any inputs and patience. Thanks!
How good is the fit? I read a lot of reviews of other frames and many report significant gaps especially at the top. Thanks for the video, I will come back a lot :D, I just purchased a Lancer and am currently figuring out how to upgrade it a bit.
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
You are an absolute monster for not showing us the plastic peel off that screen lol
Lmao , unfortunately I ended up taking it off lol 😂
@Ikigai Driven come on man
That's the most satisfying part of the whole video😢
For the dust its actually fairly simple to take the entire thing apart, the screen is a cover that comes right off and you can just use a can of air or microfiber cloth to clean it every once in a while.
Ahh good man, thanks for the tip
Could you make a short video showing how to do this?
nice! makes the interior more modern with tech
thanks bro
Hows it holding up long term? Can we get an update?
Still enjoying the system? Thinking of buying one
hey mine has a 2 white color reverse light on lancer one is bigger wire and the other one is a bit small , whice one is the reverse light?
Hi, thanks for the video, it is really helpful. I have one question related to the rare camera:
My car is a Lancer 2016 US/Canada version, Is the location of the backward light harness as well as the wire colour the same as your EVO X?
I got a multimeter with me, when the backward light is on, what is the voltage between the "white" and the "Black" wire in the backward light harness? Maybe I can check it myself before installation.
Many thanks for your help.
New to the evo platform but need a reverse camera this setup seems legit will this fit in my final edition evo x 15 are they all the same ?
Are the connections the same in the Ralliart?
how did you get the Logo sign at start up?
I “liked” the headunit til I had problems with it. Expensive head go have as many problems I’ve encountered
1:50 Yikes man 😅 I didn't have headphones in
Lmao haha 😂
Hey how is the headunit holding up so far?
I would like to know too 😅
Went with the exact set up and with back up camera. Installed the stereo and it works great. However when I installed the back up camera stereo stays stuck displaying back up camera. Followed all steps exactly how you did it. What am I doing wrong?
Probably the power on to the camera is always on, you want to make sure its engaged only in reverse. Check your camera and how its connected to the reverse light
@@ikigaidriven I did it exactly how you did. I wired it to the reverse white wire and everything. It stays stuck on the camera even though it’s not on reverse. I went to Best Buy to have them check it out but they told me it’s wired to ACC
Im a little late to the party, but I think you don’t need to ground it in the back since the headunit already has a ground connection
Great Video!, i have a bit of a dumb question but I'm a begginer here, does it use my phone's data for the Car Play?? (Iphone user)
Yes it does
You connected the reverse signal in the front. But where did you connect the one in the back?
Do you connect the red power cable together with the reverse signal cable in the back?
I'm only asking because you only mentioned the one in front but not the one in the back and I want to put a reverse camera on my lancer.
I just want to be sure 😅
It’s all there, I showed my wiring diagram
Do you have the Rockford Fosgate audio? if I did have the Rockford fosgate audio system, if i select the SYGAV without the Fosgate audio system will it cause problems?
yes
Can you access all the dash and steering wheel function on this head unit?
Yup all the steering wheel functions are retained
So I accidentally bought the 2008-2013 and mines a 2014 would it be fine or am I gonna have to order a new one?
Is the rear Camera optional like I don’t have to connected it because I don’t really need it
Optional
Does my phone need to be connected via usb for android auto to work?
Would this fit in a 2009 Mitsubishi Lancer gts??
yes
Will this work the same in a 2013 lancer?
Yes it will
Can you connect a controller to it? I need to know before I order.
Could you show us where you mounted the camera?
Yes I will, it’s basically mounted on the license plate
How did you get the steering wheel controls to work ?
There’s a built in app
Do I find it in the settings ?
@@orbitalpanda2574 its one of the applications, not in setting. just look through the already installed apps
@@ikigaidrivenis wheelkey study the right application for the steering wheel controls? It says press steering wheel buttons but nothing happens
The only reason I dont buy one of those sygavs is the problem you mentioned with dust and moisture going into the display. Maybe the Dasaita ones have a better quality?
So far crosses fingers no dust
Put silicone over the frame
Thats an idea
I’ve had one 2+ years. No dust or issues.
@@btsc1 great to know, thanks for the comment
How’s it holding up almost a year later??
Doing great no problems
Is there any audio delay from your phone to the unit? And does it lose sound quality?
Maybe an audio delay but it has an equalizer and it actually sounds better than stock
How do you get the Mitsu logo on boot?
Thanks for posting this. I’m long for the upgrade but I don’t want to loose the ETACS function (lights, wiper etc). Do you know this unit retains those functions or they are gone for good? Thanks again!
Those functions are retained
That’s good to know. I’m not really technically inclined but I heard that you need some kind of connection to the CANBUS (at least that’s what I’ve been told). How did you make that connection? Does the unit come with the CANBUS wiring? Can you post a video about it? My apology for the stupid questions and appreciate any inputs and patience. Thanks!
Could I put this in my lancer?
Looks crazy 👍🏽
Thank you, appreciate it
Would this fit on my 2017 lancer es ?
Yes it will, when you click the link, make sure to select the model that fits your car. It will be listed
Hey curious to know if you went ahead and installed on your lancer?
Does anyone know if the Apple play screen system is single or double ?
Not sure i understand your question
How good is the fit? I read a lot of reviews of other frames and many report significant gaps especially at the top. Thanks for the video, I will come back a lot :D, I just purchased a Lancer and am currently figuring out how to upgrade it a bit.
I’m thinking about getting one for my lancer have you gotten one?
Still happy with this unit ?
loving it !
must give this to my car!
Yes
Is it Apple compatible ?
Which one do i order if i have Rockford Fosgate non Nav unit?
It says it in the options on Amazon, there's one for the Rockford Fosgate
Would this work on an 09 lancer?
There are different versions of this , the link in the description will bring you to all of them
@@ikigaidriven would the volume buttons on the steering wheel still work?