When the Legion Go first announced, I remember being drawn to it as if I had lived this life many times and knew this device would be a banger. I'm not disappointed.
fr i remember the 3D Viewmaster..then tiger electronics handheld lcd games..then game boy & atari lynx & sony psp..i adored those maybe more than my consoles..now today ive got 32:9 & VR..but still i had to pull the trigger & bought the 1TB Go for the possibilities of lossless scaling to bump all the games i didnt get to play back then..so for ps3/360 era & earlier games i hope to max em out @ 120/144Hz & go crazy
@CCP-pb5ss Exactly 💯 I bought it to play older PC titles. Imagine my surprise when I realized it could push modern titles. I have been uploading gameplay videos on this channel for some time now.
..but w frame boosts why not set your games @ full resolution of the monitor (2560) instead of going down to 1080 but really upscaling 800p.. the AMD Z1 Extreme is equivalent to Raedon 780m & GTX 1660..so are you saying the games youve tested cant do 30-60 fps at 2560x1600?
I think I figured it out for mine when I would run the settings at 800 p I would get high frame rate but choppy play switch vram 8 g in bios play on 1080p wz settings are , fsr 3 balanced everything low except textures keep at normal and vram memory at 75 , plays smooth at 90-130 fps and can see players farther away
Damn! Can you post results for MW3 Warzone with these settings? I'm so curious! I just dialed in everything again with the space TDP update but I'm still using FSR 3 frame gen to get 130 fps in resurgence.
I dont understand the 800p res but ingame 1200.. shouldnt it be the other war around?... you run ur lego on like 1600p.. then put games on lower res.. like 800p.. and it will upscale it. If its the other way around, im not even sure what its supposed to do :D .. does it just load higher textures on a lower res screen with 0 upscaling?
If you using integer scaling it upscale from 800p to 1600. If you put ur legion space on 1600p tht too much from the system it self ur fps would drop crazy depends on the game. Use 800p or 900p
I side loaded this driver to increase performance on Space Marine 2 the without AFMF2 it runs way better than stock Lego. However with AFMF2 on I get a lot of ghosting in game and the smoothness is just not there in general so I switched to lossless scaling . Anyone got any ideas as to why AFMF2 is causing the ghosting so bad?
@@JahsonENT oh yeah lossless does but for me it has drastically less ghosting than AFMF2. I really can’t figure out why but maybe it’s a Space Marine 2 issue only since that game is pretty demanding for the LEGO
Thx for the video, i have a problem maybe u can fix, Mw3 always crash in mid game or when the round ends or before getting into the match What can i do?
looks really smooth it sucks. you dint show any warzone video. rather than jist multiplayer can you do one ? just thinking inshould get this legion go or rog ally x
Hey so I downloaded this and I got it to work at first but after It started to crash my games like MW3. I also ran an update In the legion space and it went back to the older 23.4. Then my Legion Space completely stopped working. I had to factory reset my entire device. Right now I'm just running the stock Legion version 23.4 and MW3 is running. Not the best but it's playable. I would like to get this 24.9 version of the update but I'm afraid it's going to crash my system again and I'll have to start everything over. Any tips?
If watch full video I show my legion space running fine no issue. Also if you go back to 24.9.1 don’t update from space or windows, turn off auto update in windows
I had the exact same issue. After resting windows (which i think ended up being unnecessary) i installed the new driver and it kept failing but turns out bc i was clicking “780m graphics” and not the one i was supposed to which is something like “(TM) 780m graphics”. Someone did say the 780 xt worked for them but i did not try it
How do I put it back to the regular legion go driver cause I still haven’t fix my problem and you haven’t try to help . Just trying to put it back to normal
Hey Jahson You’re doing it wrong In order to check if the RSR or AFMF is working while you are in the game You have to enable “in-game overlay” in amd first go to setting >preference, then enable it Then go to hotkeys and enable use hotkeys Now go to legion space and from control you can customize one of the rear buttons to do ALT+R Now whenever you want to check if the AFMF OR RSR is working just click the button that you customize Keep it up 👍🏻
Except you have to do a bunch of junk to manually install it b/c the Z1 Extreme is some kind of hybrid chip that lacks proper AMD software support. If you own any device with just a 7,000 or 8,000 series chip & not a Z1, all you have to do is download the AMD auto detect driver software tool & fluid motion frames version 2 will be working in minutes. The Z1 sucks, basically. I installed fluid motion 2 onto a One X Player & what I can say is the appeal to this software is how low the frame gen lag will be on many games while running it. You can’t really run “Art of Rally” with lossless scaling b/c of frame gen lag, but with Fluid Motion v2 there basically is no lag.
@@JahsonENT Man, I just installed 24.9.1 and it's running Hogwarts with FPS varying between 40 and 47 running on low! I played with the 24.20.11.01 configuration playing on high with FPS between 80 and 87.
When the Legion Go first announced, I remember being drawn to it as if I had lived this life many times and knew this device would be a banger. I'm not disappointed.
Nice, yeah it is. Lenovo just slow with the updates
fr i remember the 3D Viewmaster..then tiger electronics handheld lcd games..then game boy & atari lynx & sony psp..i adored those maybe more than my consoles..now today ive got 32:9 & VR..but still i had to pull the trigger & bought the 1TB Go for the possibilities of lossless scaling to bump all the games i didnt get to play back then..so for ps3/360 era & earlier games i hope to max em out @ 120/144Hz & go crazy
@CCP-pb5ss Exactly 💯 I bought it to play older PC titles. Imagine my surprise when I realized it could push modern titles. I have been uploading gameplay videos on this channel for some time now.
Been waiting for someone to try this driver on Helldivers 2. Appreciate the effort, bro.
Works perfect with he’ll diver 2
@@JahsonENT will try with your settings. Looks great.
Thanks for putting this out. I have the first beta version of afmf v2. Epic video as always. I'll be updating it due to your video.
@@wyattgough3662 thanks for tuning in 💪
Anti lag drops your FPS and in most cases is not required. Also set Wait for Vertical Refresh to Always Off in Adrenalin software for AFMF2.
copy thank you
Imput lag is too high when you use fmf2. Anti lag is essential to use together with fmf2
Thanks bro. I'm loving my Lego purchase more and more after your vids lol
Glad to hear it!
Legion go is the best portable pc console ! 🙌
💪
True indeed
Bro this driver is so good I'm rolling in Auto Vram, G.O.R. and G.O.T. running smooth as butter.
Oh and I just stay in Performance TDP, CPU boost on Efficiency.
yeah its awesome
Thx for the video bro but better to wait for the official one
yeah its up to you
Bro you showed me about lossless scaling and I ain’t looked back since my guy, no need to get no ally x we just wait for the Lego 2
lossless is still good
Ill be happy with this when i buy it. I have a gpu equivalent to this handheld, a little more powerful with an extra tflop compared to my gpu.
Sound good
So,if you lock the hz mode to 144 and the fps lock to 144 you will get an even better experience,i see it stuttering sometimes in mw3
Also was playing on both custome 19w,19w,22w and performance thermal modes , os power always stays on efficiency
the stock driver is performing better for me, I think Lenovo has hidden optimizations in it. Im waiting for them to officially bring AFMF2 to legion
yeah its usally like that, because they optimize the drive them sefl
I dont like the stuttering the frame generation creates. Hasnt been great for me on the lego
..but w frame boosts why not set your games @ full resolution of the monitor (2560) instead of going down to 1080 but really upscaling 800p..
the AMD Z1 Extreme is equivalent to Raedon 780m & GTX 1660..so are you saying the games youve tested cant do 30-60 fps at 2560x1600?
no it can not not to 1600p
I think I figured it out for mine when I would run the settings at 800 p I would get high frame rate but choppy play switch vram 8 g in bios play on 1080p wz settings are , fsr 3 balanced everything low except textures keep at normal and vram memory at 75 , plays smooth at 90-130 fps and can see players farther away
That’s great to hear that you figured it out, the Vram might have been the main issue
Damn! Can you post results for MW3 Warzone with these settings? I'm so curious! I just dialed in everything again with the space TDP update but I'm still using FSR 3 frame gen to get 130 fps in resurgence.
ill do a video
I dont understand the 800p res but ingame 1200.. shouldnt it be the other war around?... you run ur lego on like 1600p.. then put games on lower res.. like 800p.. and it will upscale it. If its the other way around, im not even sure what its supposed to do :D .. does it just load higher textures on a lower res screen with 0 upscaling?
If you using integer scaling it upscale from 800p to 1600. If you put ur legion space on 1600p tht too much from the system it self ur fps would drop crazy depends on the game. Use 800p or 900p
Do an updated mw3 in game settings vid pls or have they not changed since last?
been a while i played it, it same settings
I've got the 24.20.11.01 that you did an tutorial on last month video (I guess), what's the difference? Both has afmf 2
24.20 was the beta driver, this is the official release of it and it more stable
Wish I could “safely” install side load this on my legion go, tried to do that and nothing worked properly.
Did you use DDU before installing?
Follow this video
th-cam.com/video/z1lZU7j_6eg/w-d-xo.htmlsi=JCVGA71v53hsIyn7
By the way you say "back" at the start of your videos, I can tell you are a fan of Comicx Explained.😅
Nah lol just had to google what tht was, don’t watch video about comics
When I'm playing Warzone it crashes often. I have updated stcok drivers but thats about it. Any advice from anyone? COD frequently crashes for me
side loaded drivers might be way to go
@@JahsonENTcan you direct me to which exact ones / how for the legion go
If your screen is limited to 800p why would you set the game to 1080p?
Huh, I had game at 800p and my my screen limited to 1080
I side loaded this driver to increase performance on Space Marine 2 the without AFMF2 it runs way better than stock Lego. However with AFMF2 on I get a lot of ghosting in game and the smoothness is just not there in general so I switched to lossless scaling . Anyone got any ideas as to why AFMF2 is causing the ghosting so bad?
Lossless scaling has ghosting as well. I never played space marine not too sure how well it works on that
@@JahsonENT oh yeah lossless does but for me it has drastically less ghosting than AFMF2. I really can’t figure out why but maybe it’s a Space Marine 2 issue only since that game is pretty demanding for the LEGO
How come nerdnest or fanthedeck aren't talking about this? Because they are on Valves sack
absolutely dont understand why anyone likes that weak ass steamdeck it SUCKS
Thx for the video, i have a problem maybe u can fix,
Mw3 always crash in mid game or when the round ends or before getting into the match
What can i do?
not sure why its not working for you
I don’t know, Why my legion go dropping 2/3 of the fps and running too laggy after installing AFMF😢
Maybe it’s ur setting
looks really smooth it sucks. you dint show any warzone video. rather than jist multiplayer can you do one ? just thinking inshould get this legion go or rog ally x
copy ill do one
@@JahsonENT right on brotha. cuz i try. rog ally x. and its so smooth but expensive. also i hate. the screen too small ..
Is the LeGo getting drivers and updates faster than the Rog Ally and others ?
No it’s actually slower
@@JahsonENT
I have the Ally X and still have not gotten the AMFM 2 or any AMD updates that I see videos of other posting about .
Hey so I downloaded this and I got it to work at first but after It started to crash my games like MW3. I also ran an update In the legion space and it went back to the older 23.4. Then my Legion Space completely stopped working. I had to factory reset my entire device. Right now I'm just running the stock Legion version 23.4 and MW3 is running. Not the best but it's playable. I would like to get this 24.9 version of the update but I'm afraid it's going to crash my system again and I'll have to start everything over. Any tips?
If watch full video I show my legion space running fine no issue. Also if you go back to 24.9.1 don’t update from space or windows, turn off auto update in windows
I had the exact same issue. After resting windows (which i think ended up being unnecessary) i installed the new driver and it kept failing but turns out bc i was clicking “780m graphics” and not the one i was supposed to which is something like “(TM) 780m graphics”. Someone did say the 780 xt worked for them but i did not try it
Is the same for install in rog ally?
This driver solved the crash scene in ffxvi?
Ty 😊
yup
How do I put it back to the regular legion go driver cause I still haven’t fix my problem and you haven’t try to help . Just trying to put it back to normal
download it from the Lenovo site
@@JahsonENT I did but now I can’t open the legion space or anything
Is the performance better than the AMD preview driver?
yes it is, watch video you will see
mine fps counter legion space not working after update new driver amd 24.9 any solution?
make sure game is on full screen
@@JahsonENT already full screen but i doesn't work
Legion space is not opening after the lastest window update
dam, try reset see if that fix it
Only me get the error with gpu is not suporter ?
i get it sometimes but it still work
My Alt+r is not working anymore. Any idea why is that?
nah not sure why
Hey Jahson
You’re doing it wrong
In order to check if the RSR or AFMF is working while you are in the game
You have to enable “in-game overlay” in amd first
go to setting >preference, then enable it
Then go to hotkeys and enable use hotkeys
Now go to legion space and from control you can customize one of the rear buttons to do ALT+R
Now whenever you want to check if the AFMF OR RSR is working just click the button that you customize
Keep it up 👍🏻
Except you have to do a bunch of junk to manually install it b/c the Z1 Extreme is some kind of hybrid chip that lacks proper AMD software support. If you own any device with just a 7,000 or 8,000 series chip & not a Z1, all you have to do is download the AMD auto detect driver software tool & fluid motion frames version 2 will be working in minutes. The Z1 sucks, basically. I installed fluid motion 2 onto a One X Player & what I can say is the appeal to this software is how low the frame gen lag will be on many games while running it. You can’t really run “Art of Rally” with lossless scaling b/c of frame gen lag, but with Fluid Motion v2 there basically is no lag.
Esto es lo que se va actualizando en la misma consola o se hace manual?
Manually side loaded it. Watch video in description box show you how to do it
@@JahsonENT no ocurre nada malo por hacer?
@@rodrigovasquez8902 just follow step by step u should be good I have no issue. But some people are having issues after installing
I got worst results than Lenovo stock drivers I don't know what's happened
Did you use DDU before installing?
Follow this video
th-cam.com/video/z1lZU7j_6eg/w-d-xo.htmlsi=JCVGA71v53hsIyn7
What do you use for fps counter overlay?
Legion space overlay
Just make sure the game is in full screen for it to work
when is the driver release date actually
Think it was last Wednesday!
@JahsonENT the official like go in to legion space and it will give me afmf2
@@drew3488 oh tht up to Lenovo probably no time soon. Not sure
I aint trying to do all that. Why can't Lenovo simplify it to a one click download? 😂
Just have to wait 😂
Bro do u get flagged for playing cod on the legion go?
never did when i used to play alot
Hey brother! Do you believe that version 24.9.1 is better than version 24.20.11.1?
Yeah it’s more stable
@@JahsonENT Man, I just installed 24.9.1 and it's running Hogwarts with FPS varying between 40 and 47 running on low! I played with the 24.20.11.01 configuration playing on high with FPS between 80 and 87.
How to download
Lenovo Legion Go - AMD 24.9.1 Driver Official Release Update Guide | DDU
th-cam.com/video/z1lZU7j_6eg/w-d-xo.html
This video show how
which 1 is better legion go or rog ally x ?
if want bigger screen go with the go, if want bigger battry the ally x way to go. other than tht they kinda equal
It's definitely not better than Lossless Scaling.
Try 1200p
@@modestopulido6389 copy I’ll do tht. For what game ?
@@JahsonENT warhammer demand game
why are you saying all the time "Im not gonna lie" :-) does it mean that when you don't say it - you lie?
lol nah!
Poor quality.
@@romanplacek9425 it’s 4k 60
Its a stuttering mess😂
Not really
Micro stutters here and there...