3D Printed Polaroid Lithophane || Dehapro

Fusing old and new technology for storing memories. Turning digital into analog with 3d printing.
STL
Cults3d : cults3d.com/en/3d-model/gadge...
Thingiverse : www.thingiverse.com/thing:496...
PrusaPrinters : www.prusaprinters.org/prints/...
MyMiniFactory : www.myminifactory.com/object/...
Feel free to suggest any ideas for the next project.

[@Spielerandom]

Lovely ❤

[@Hasblock]

Where's the link

[@alquranalkarim6312]

Great work 👍, which nozzle you print with ? 0.4mm or 0.2mm?

[@adhapro]

I'm using 0.4mm

[@alquranalkarim6312]

@@adhapro thank you 😊

[@lfecustom9474]

great video! where can I file the sTL for the lantern black box and the lithographs size STL?

[@adhapro]

In the description

[@lfecustom9474]

@@adhapro Just saw that and went to the link. i was wondering how did you sized the lithograph images to fit the black lantern slotys? i downloaded the imageconvertated into lithographs but they are way to large for the lantern box.

[@adhapro]

You need to change the lithophane and image setting in the lithophane maker link. The instructions and settings are provided in the 3d model's description.
Lithophane instructions :
Head over to 3dp.rocks/lithophane/
Tips for image : add vignette if borders are bright
Upload image of 4:3 or 3:4 (must be this ratio)
Key in Model Settings:
Max size = 61mm
Thickness = 1.5mm
Border = 0
Thinnest layer = 0.5mm
Vectors per pixel = 4
Base = 0
Curve = 0
Key in Image Settings :
Positive image
Mirror image off
Flip image off
Repeat X count = 0
Repeat Y count = 0
Mirror repeat off
Flip repeat off

[@JP01121]

What filament did you use? Is Esun abs+ can print litho?

[@adhapro]

I'm using polyterra pla. I'd suggest to print with pla as it needs to print thin and tall

[@albert94260]

Hey what do you use light?
Sory mi english is so bad😢

[@adhapro]

I'm using Ulanzi VL49 RGB
Your english is good as long as we can understand each other 🙂

[@uliz17]

Sorry but i not see the stl.file, tq

[@adhapro]

The link is in the description. The lithophane stl is to be generated on another website. All instructions are in those links.

[@alquranalkarim6312]

Hello again 😂 can you tell me minimum thickness of lithophane you did because with minimum of 0.8 i got hols in lithophane

[@adhapro]

Minimum of 0.8 is good enough as it is 2 times the nozzle width. If you're using prusaslicer might need to enable the detect thin walls. Does the sliced preview have holes?

[@alquranalkarim6312]

@@adhapro i have printed it with 0.8 minimum but i made the image dark a little bit because i got holes in white color places of image ,and it worked well 👍 thank you

[@robomatics697]

hey can you send me link of this 3d printing model

[@adhapro]

The link is in the description

[@keplernova5425]

I tried finding the link but can’t

[@erodevaanamcreations2084]

The link is not here

[@jtproduction_]

The description of shorts never worked
Putin it in comment is better

[@deltawasneverhere]

@@jtproduction_ press 3 dts for descripion