Oh ya I just brought a 109 home. It runs great! 2 Kubotas , 2 CUB CADET and a Power king. The garage is full now. I love watching all your tractor videos! Addictive :)
I knew you were going to want and need a pedal on the right when you were saying you would just use the left handle. Nope much easier with the pedal and use your left hand for the controller on the front loader :) man your machine turned out nice! Beautiful! Please sell it to me haha
isavetractors Ty those are actually proper plans i should know im a Jman steel fabricator. they are only complex because all of the information you need appears to be on them (from the quick peek you gave us) nobody should have any problem paying for them, i was always worried i would end up with garbage after paying the money for plans online, do you mind if i ask if they mail you the plans or if they are sent electronically and do they include a nesting plan or cut list?
+fixt100 They do not include a nesting plan or cut list. They do include material list, CAD plans like you see in my videos, notes, and hydraulic schematics. They mail them to you. It was well worth the money. Watch the rest of the videos in my series and I show more clips of reading the plans, etc.
I have a question I currently bought a #1 tiller and runs great but my mule drive pulleys are at an angle throwing the belts off when I install the mower deck which I believe is a 44A they never throw off can I just straighten the pulleys straight up and down to the pto and be ok with both setups?
Hey man watched all your videos in the build series. First of all great job. I got a few questions. Did you follow the hydraulics schematic or did you get an upgraded pump? And does tell you how to wire the hydraulic pump electrically
Good luck ;) But I would not put duals on a backhoe type tractor. But I would go for the largest tire, the industrial log type and wide ridge for the front ;)
Hi Norman, I'm Ian from England (That's in the UK). It would make emptying & cleaning easier if you had given the two buckets rounded bottoms (the next bend after the blade!)? You've done an excellent job on the tractor & many others that I've watched, keep it up!!! Bye, Ian.
Cool thanks man, I just bought a coil and stuff from ya on ebay. I know this is a dumb question but where is the oil drain on the K301 and how do you change the hydrolic fluid ? is the hydro fluid and rear end fluid the same stuff?
The oil drain for the engine is directly on the bottom of the oil pan. The hydro fluid, is in the rear end and it also acts as a sump for the transmission. Best way to drain that is to unscrew the suction line directly in front of the rear end. You will see it lead from the rear end to the transmission.
I have a cub cadet 169. I love it, but there is one thing I am going to change, Im going to move the ignition key up above on the top of the dash. The OEM location of the keyed ignition is just awful. I am constantly having to lean back to see where the key is going. I dont know what IH was thinking putting the ignition down there but it is a royal pain .
Hey, thanks for the comment.. not happy with the Koehler as it needs a battery, and starter/generator.. would much prefer just a recoil starter,, less to break down..the old 8 horse Koehler is tired and while i would consider the rebuild, I’m thinking that i want to get away from all the external ‘letrics
@@Isavetractors I have a 1250 And the hydro is leaking know where it's leaking from. Do I gotta replace the whole thing? I'm not sure I don't understand them.
Oh ya I just brought a 109 home. It runs great! 2 Kubotas , 2 CUB CADET and a Power king. The garage is full now. I love watching all your tractor videos! Addictive :)
Looking forward to seeing your build
Nice build, I have a 127 with a frontend loader. Works great!
I love Cub Cadets they are very good tractors.
I love this intro!
I knew you were going to want and need a pedal on the right when you were saying you would just use the left handle. Nope much easier with the pedal and use your left hand for the controller on the front loader :) man your machine turned out nice! Beautiful! Please sell it to me haha
Thanks for the suggestion. I will keep that in mind as the build progresses!
+isavetractors is there any way you could let me know where you got those schematics for the loader and backhoe? (or email them to me?)
www.loaderplans.com and www.backhoeplans.com both are created and sold by PF Engineering. Great plans!
isavetractors
Ty those are actually proper plans i should know im a Jman steel fabricator. they are only complex because all of the information you need appears to be on them (from the quick peek you gave us) nobody should have any problem paying for them, i was always worried i would end up with garbage after paying the money for plans online, do you mind if i ask if they mail you the plans or if they are sent electronically and do they include a nesting plan or cut list?
+fixt100 They do not include a nesting plan or cut list. They do include material list, CAD plans like you see in my videos, notes, and hydraulic schematics. They mail them to you. It was well worth the money. Watch the rest of the videos in my series and I show more clips of reading the plans, etc.
Hello.. These are great videos! You do good work. I just found your channel and I subscribed. I will enjoy watching the build.
I have a question I currently bought a #1 tiller and runs great but my mule drive pulleys are at an angle throwing the belts off when I install the mower deck which I believe is a 44A they never throw off can I just straighten the pulleys straight up and down to the pto and be ok with both setups?
Hey man watched all your videos in the build series. First of all great job. I got a few questions. Did you follow the hydraulics schematic or did you get an upgraded pump? And does tell you how to wire the hydraulic pump electrically
What is a rough price for a front loader kit...??
And where do u get one lol
Impresive!
Good luck ;) But I would not put duals on a backhoe type tractor. But I would go for the largest tire, the industrial log type and wide ridge for the front ;)
Hi Norman, I'm Ian from England (That's in the UK). It would make emptying & cleaning easier if you had given the two buckets rounded bottoms (the next bend after the blade!)? You've done an excellent job on the tractor & many others that I've watched, keep it up!!! Bye, Ian.
Whats the differences between the Cub 129 and the 149
Just the Engine. The 149 has a 14HP Kohler K321, and the 129 has a 12HP K301.
Cool thanks man, I just bought a coil and stuff from ya on ebay. I know this is a dumb question but where is the oil drain on the K301 and how do you change the hydrolic fluid ? is the hydro fluid and rear end fluid the same stuff?
The oil drain for the engine is directly on the bottom of the oil pan. The hydro fluid, is in the rear end and it also acts as a sump for the transmission. Best way to drain that is to unscrew the suction line directly in front of the rear end. You will see it lead from the rear end to the transmission.
So where is the video on the hydraulics?
Where can i purchase a new crankshaft for the K181 Kohler Engine that came on my Model 86 Cub Cadet Wide Frame ?
I have a cub cadet 169. I love it, but there is one thing I am going to change, Im going to move the ignition key up above on the top of the dash. The OEM location of the keyed ignition is just awful. I am constantly having to lean back to see where the key is going. I dont know what IH was thinking putting the ignition down there but it is a royal pain .
I must have missed it, did you do a rear mount hitch to whatever category hitch that you are using?ie early 60’s ih cub cadet? Thanks
No rear hitch on this project
Outstanding channel. Would my 1450H be a candidate for such a build?
Thank you. And do you mean the Cub Cadet 1450? If so, yes it would be an excellent candidate
Hey, thanks for the comment.. not happy with the Koehler as it needs a battery, and starter/generator.. would much prefer just a recoil starter,, less to break down..the old 8 horse Koehler is tired and while i would consider the rebuild, I’m thinking that i want to get away from all the external ‘letrics
impressive
Where do you get those loader plans?
Hey do the plans include hydrualic cylinder specs? Or do you have to figure that yourself
They include everything. They tell you exactly what hydraulic stuff to buy
@@Isavetractors can you share the cylinder sizes? I'd like to price out the cylinders before I buy the plans.
What would you recommend for a reporter, the old Koehler is pretty tired
I recommend rebuilding the Kohler instead of re-powering
I know you did this some time ago but do you have any of the parts you pulled off like the rear hitch and tires
I do not. Sorry!
how do you releive the hydrolic pressure? any trick?! thanks
The two little buttons on top of the hydro transmission: knock embin with a punch and that will relieve the pressure
@@Isavetractors awesome ! thank you so much! i just refilled the tranny and these 2 valves started leaking..i tought it my be air lock or something!
Is it duelie or dualie?
Ha good catch. Dually is the proper term. Title change coming up!
Can you please link me to said plans? I would like to purchase them and work on my montgomery ward 1972. Thank you very much in advance!
www.loaderplans.com and www.backhoeplans.com let them know you heard from iSaveTractors!
Hello I really liked the project you did I would love if you could send me plans
Paul can you send you plans: www.loaderplans.com
Why can't I buy parts from you
You can buy parts from us. What are you looking for?
@@Isavetractors I have a 1250 And the hydro is leaking know where it's leaking from. Do I gotta replace the whole thing? I'm not sure I don't understand them.
I need a tractor seat for 1250.
I did got one. How much does it cost? I need to buy one minus growing grass
@@Isavetractors I need a seat for my 1250
@Isavetractors I have Called you about parts and they told me they only buy Tractors