@@ErrorFTP these position sensors are mounted on the bottom of the GSA. The GSA is bolted to the front of the transmission, on the drivers side of the car (USA). It is directly behind the gas tank.
@@ErrorFTP If the gear display window is dark, it means the TCU has found a fault and disabled the system. You need a copy of Techstream software to read the TCU error codes. Cheap OBD readers cannot retrieve the error codes, but you can find a free copy of techstream.
Hi Paul!! Really nice videos 🫡 I have a question, if one of those sensors is leaking fluid, I will need to open the GSA, replace the gaskets and reinstall it? And then after that make sure that the connectors are ok?
Is your camera angle on top of the car looking down, or are you on the ground looking up?
Looking up from beneath the car.
where is this part located in the car pls needing help!!!!
@@ErrorFTP these position sensors are mounted on the bottom of the GSA. The GSA is bolted to the front of the transmission, on the drivers side of the car (USA). It is directly behind the gas tank.
@@paulshibbs so I did found them .what would do if it’s not reading gear at all.!? Replace the parts for new once
@@ErrorFTP If the gear display window is dark, it means the TCU has found a fault and disabled the system. You need a copy of Techstream software to read the TCU error codes. Cheap OBD readers cannot retrieve the error codes, but you can find a free copy of techstream.
@@paulshibbs if it’s okay can I have your contact number !? You’ll probably save me so much money
Here a link to video showing “repair” for a jumpy or worn position sensor. th-cam.com/users/shortsfXODdR9hTdQ?feature=share
Do you travel to work on one? BOO HOOOOO
If you’re local to Savannah Ga I’ll help you out!
@@paulshibbs thanks Paul, although I am in Missouri but I have a broken SMT thank you
I’m happy to help walk you through repairs. Or talk to your shop and educate them.
Hi Paul!! Really nice videos 🫡 I have a question, if one of those sensors is leaking fluid, I will need to open the GSA, replace the gaskets and reinstall it? And then after that make sure that the connectors are ok?