Fitted a 2021 version one of these to my ZX9R F2p today. Needed a 57mm-51mm adaptor, from a different supplier, but the free silicone exhaust cement did it's job. Also free was a nice GR moto key ring, carbon look tank pad, an adhesive badge, and even a pair of black alloy valve caps. plus the fitting kit. As stated below, not Akrapovic quality, but a hundredth of the price. It's light and slim, and sounds good. Quality is acceptable. Thanks for the baffle out bit.
Mine was blowing very slightly from the same place after fitting, if you read the instructions on the provided exhaust sealeant, it states to run a continuous beed, fit together and leave for an hour, then tighten the clamp. Second time round worked a treat.
All you need is a tube of clear silicone cost a few pounds a tube, smear some of that on and slip the tubes back together, will last for year and when you have to strip down it just peels off
Yes, baffle out for sure!! Got the SC oval on my ‘13 Speed Triple it sounds great!!(& baffle out as well👍🏼). Keep the videos coming I always watch them.
Understood on the choice of exhaust! Smoother with the baffle in so yes, it may run a ‘bit better. I flashed my speedy as well so that may play a factor in performance. The sound at wide open throttle with no baffle is amazing with the SC Project installed!! 🍻
Fitted a 2021 version one of these to my ZX9R F2p today. Needed a 57mm-51mm adaptor, from a different supplier, but the free silicone exhaust cement did it's job. Also free was a nice GR moto key ring, carbon look tank pad, an adhesive badge, and even a pair of black alloy valve caps. plus the fitting kit. As stated below, not Akrapovic quality, but a hundredth of the price. It's light and slim, and sounds good. Quality is acceptable. Thanks for the baffle out bit.
Mine was blowing very slightly from the same place after fitting, if you read the instructions on the provided exhaust sealeant, it states to run a continuous beed, fit together and leave for an hour, then tighten the clamp. Second time round worked a treat.
Fitted one on my t595 last year. Too loud even with baffle in for town, had to wrap it. Sounds great when out on a run.
On mine there was an exhaust paste in the box (silicon), just used that to seal it off, also had a leak without properly sealing it.
All you need is a tube of clear silicone cost a few pounds a tube, smear some of that on and slip the tubes back together, will last for year and when you have to strip down it just peels off
Get that baffle out right away 💪🏼
we getting to old for loud bikes, just need some peace and quiet lol
@@notamotorbikemechanic you need a Honda melody
Funny you should say that, I’m on the look out for a Lambretta 👍🏼🏍
@@jiffsterkoi If I took out baffle on my little honda, then... what? Not a melody though. :D
Nice video tips
Definitely baffle out. Exhaust not had for the price but prefer the arrow or an sc project/GPR
Yeah I do like SC project
Yes, baffle out for sure!!
Got the SC oval on my ‘13 Speed Triple it sounds great!!(& baffle out as well👍🏼).
Keep the videos coming I always watch them.
Bobby R1, not my bike, so not my choice .
Think it runs better with the baffle in.
Understood on the choice of exhaust!
Smoother with the baffle in so yes, it may run a ‘bit better. I flashed my speedy as well so that may play a factor in performance. The sound at wide open throttle with no baffle is amazing with the SC Project installed!! 🍻
Top top. Esse ronco eh maravilhoso!!!
que bom que gostou
Does your friend still have this bike? Any issues?
No he sold it about a year ago.
No issues, except leaking fork seal. Happen about three times.
@@notamotorbikemechanic what is your opinion on the speed triple 08?
hi my friend! nice video :) i have a question .. where did you bought that wheel rim ?
The bike is standard, so the wheel came with the bike.
If you mean the centre cap, I think it was from eBay.