@@squizyszn7497 yea same here ppl jus clickbait to get the views then get bots to comment that it works then ppl believe it, why do u think he hasn’t answered anyone who said they had a problem
For those trying this after seeing Aydan's video. I'm on W10 x64 and had issues. To solve them, you need to go into your BIOS and disable secure boot before you commit to the filter on device step. There's some security signing or whatever that wasn't done by the app developer so this version of windows will reject the driver unless you have secure boot disabled. I had ignored the issue but it bricked my controller. I had to reset the controller driver then disable secure boot and then finally I was able to complete the steps. Thanks for bringing this overclocking to light Nameless and Aydan. Excited to see how it impacts my gameplay
@@Sterbenys There was a warning message when I tried to install the filter on device setting. I ignored it and the controller wasn't being picked up by warzone. I reset the controller driver and it was fine again. then I had to disabled secure boot. then the steps worked fine. So if you see a warning, you can avoid about 15 minutes of hassle by disabling secure first. Otherwise, you're just good to go.
@@joshpeterson5304 I don't remember. Haven't messed with this in a while. My guess would be to go into your device manager and right click on the controller. There are some options there.
I know other top youtubers say the xbox remotes get no added benefit but it depends on the quality of the brand obviously. For instance I tested on a MSI MC30 v2 remote and wireless it makes no difference overclocking it keeps on 16ms average but if you use it in wired mode it goes from 4.4ms average to just 1.9ms average. So this is still a win in my books
For anyone getting errors. You have to load an unsigned driver. The Secure Boot Windows UEFI option in BIOS settings maybe preventing it from loading the driver. So in Boot Options find Secure Boot and set the OS Type to Other. Otherwise google How to load an unsigned driver, it's annoying to do it any other way every time.
Just fresh installed my PC and its windows 11, getting this error message. I secure booted to allow the unsigned driver, installed and then restarted my pc but then the controller doesn't work. Cant not run windows secure boot because anti cheats need this.
@@loganjohnson8797 yes, for me I turn it off when playing cod, and then when playing valorant I turn it back on. It's a little tedious but hey it takes 30seconds.
@@kennethhernandez6707 that is my main issue. its a good video if it works without any problems and everything goes exactly how it goes in the video. If it doesn't then no other solutions or help is offered.
For people that don't know you don't have to click install service 3 times the directions are on the page when you download it you only have to install the service once then put it to 1000 hz and filter it. You also don't have to unplug the controller you can just hit restart and it will update if it doesn't update then you can unplug the controller and plug it back in.
@@1235-b6j Does it say its at 1000hz? If its not working try unplugging it a few times. One time I did it I had to unplug it like 3 times. If it still doesn't work at 1000 try setting it to 500 and if that doesn't work then set it back to default then untick filter.
@@imaSoldier187 for some reason I can't change the 5 to a 1....I had the same problem as the other dude commenting below as well and I'm wondering if that is the issue. PLS SEND HELP smh
@@mrdirtysauce There is a ton of answers in the comments below. I would disable secure boot if you haven't make sure you save the settings in the bios. If it doesn't turn green I would reverse all the steps you did with the program make them all default again untick filter on device set rate to default restart then reapply the settings if it still doesn't work try another usb port. I always get mine on green 1000 rate but sometimes once in a while it goes red randomly. The last thing I would do is a hard reset, shut down the computer remove power plug hold the PC power button to drain all stored power for about 5-10 seconds plug the cord back in and fire the pc back up.
hmmm, doesn't seem to work for an XB Elite controller...I doesn't show up as HID compliant, and I can't change the binterval, which is stuck at 4. Also, I get a bunch of warnings when I try to enable filter :/
FOR ANYONE THAT IS HAVING ISSUES WITH A RED BAR OR SOMETHING SIMILAR. when you click install service a new window should pop up or a loading bar should pop up, i got the red bar when niether of those popped up. i then manually reverted what i installed on the controller to its defaults, and i tried it again, the first time you click install services it should ask you if youre sure and then it will download it. and each time after that it should just show the download bar really quickly.
if this broke your scuff controller like it did to mine don't worry. Completely uninstall his programme , then use your scuff key to restart your controller, this should work i had to restart mine twice for everything to go back to normal. SUB if you want fortnite content. I don't appreciate this guy not helping anyone he's fine when people are praising him
@@josefsaredahr I believe it should. My apologies if I’m wrong but your controller could be popping up as an audio device or something similar. Just go to all devices, plug your controller in or already have it plugged in, then plug it out to see what your pc recognizes it as. Then follow the instructions he gave.
So we’re making the USB connection check more often to see if there has been a change or updated instruction. Why didn’t we stick with the old ps2 Port from the 80s which waited for new instructions to be sent? Linus did a video comparing the two connections years ago and there were some competitive players who intentionally played with the ps2 Mouse because they said it felt faster. It looks like someone should revisit the comparison.
actually the diffrence between usb and ps2, USB gets refreshed every "tick" by the cpu to check if there was a signal sent, PS2 in the other side sends the signal to the cpu saying "hey i clicked here" instantly, making it faster for sure, there's adapters (usb to ps2) and the mouse should be working if u use that :3
it's only faster if you have a weak cpu. if you are not an esports player with immaculate reflexes, you will hardly notice the difference between PS/2 and USB
For anyone having error 577 look up "Error 577 hidusbf fix!! By art Lopez. If you don't have the entry that you need to change you need to add it by right click select new dword 32 then follow the rest of the direction on the video.
Tried using a PS4 controller, it worked for me. At first I got a red error over the driver but you need to go to Device Manager, Right Click the USB Drive in Yellow --> Update the Driver --> Select from Driver List --> Wireless Controller then it worked for me. Or you can uninstall the driver in Device Manager and reboot the computer.
Hi this is an extremely late reply but if you or anyone else in the comments is receiving error 577 or a warning when you enable filter on device, you need to disable secure boot from your pc's bios settings. Once you have disabled secure boot redo the steps as outlined in the video and it should be successful!
For anyone whose PC suddenly stopped recognizing their controllers: Connect your controller with your micro usb Run Setup Hit "all" Highlight the red bar unclick filter set the interval to default hit "restart" unplug, and plug back in
What's funny is all the videos of people setting their polling rate on Xbox controller to 1000 and not checking the response time afterwards to notice that even attempting to change the polling rate actually impacts the response time in a negative way reducing it by 25% from 120hz to around 80-90hz. Then the guy in the video is like "I've been completely pwning noobs with this overclock!" not realizing his controller is now objectively worse..
Thanks for this awesome video man! One question, will this feature still work having the controller connected through Bluetooth? Or would I have to keep it connected at all times?
@@meerabdulnadeem5714 To be honest, I can’t really tell the difference between having it plugged in and having it connected via Bluetooth.. i’ve been playing for the past month is my controller connected to Bluetooth, so my plan is to for the next couple of weeks to play with the controller plugged in to see the difference
FOR ANYONE THAT IS HAVING ISSUES WITH A RED BAR OR SOMETHING SIMILAR. when you click install service a new window should pop up or a loading bar should pop up, i got the red bar when niether of those popped up. i then manually reverted what i installed on the controller to its defaults, and i tried it again, the first time you click install services it should ask you if youre sure and then it will download it. and each time after that it should just show the download bar really quickly.
its because when you press "filter on device" it may give you a pop up. If so, first, go into device manager and uninstall your controller then unplug and plug it back in. You then just have to go into your bios and disable "secure boot/startup". It worked for me
The best way to tell if someones download link is legit is to do the following things; Check the like to dislike ratio. A lot of dislikes, dont click it. A lot of likes and very very few dislikes, should be fine. If they have like rating turned off, leave immediately. Check the comments, do the comments seem like bots are typing it out? Sort by new and see what people are saying. You should be able to tell whos a bot and whats not. Subscriber count is also a good way to check. I'd say reputable starts at around 10k+ but you can never be too sure. Lastly, anti-virus or virus total the link. Simply run it through a site that checks if it contains malicious files. Keep in mind some programs or files may contain something called false positives, essentially meaning the virus checker sees something malicious but in reality its not and it's just detecting that because the nature of the program, you can look more into that if you're still suspicious.
This works greats. Just did some testing and there is a difference. At first I thought that it was kind of off playing with it and then remove it and put it back to normal for a day. Then I came back and installed the 1000 polling rate at 1ms response time. Yes it's a better response for gaming with a controller.
@@ethan3587 across the top menu left of the word device there is a drop down and select all. This will bring up all devices plug into your PC. If your not sure which one it is unplug it then plug the controller back in. Note this is for devices plugged into PC driver software. Not sure if this works on consoles. Pay attention. On the video and follow the steps. Once it's set you unplug your controller and plug it back in and you should see Yes under Filter which you want on, 1000 under Rate and a 1 under blnterval column. You do not need to do this each time you start your PC. Set it once and its done. Hopefully this helps.
its because when you press "filter on device" it may give you a pop up. If so, first, go into device manager and uninstall your controller then unplug and plug it back in. You then just have to go into your bios and disable "secure boot/startup". It worked for me
was anyone else having a problem on that final step ? after i check off the filter on device box. The device name column was highlighted pink with no milla sec response time number !
go to settings > devices > "devices and printers" > right click ur controller > properties > now kinda tricky but nps > go to each driver and make sure to open it with "open changes or something like that "> window will pop > click drivers.. and enable that device you might haave to check for all the drivers and make sure it's enabled it should work
@@fyahface2519 go to settings > devices > "devices and printers" > right click ur controller > properties > now kinda tricky but nps > go to each driver and make sure to open it with "open changes or something like that "> window will pop > click drivers.. and enable that device you might haave to check for all the drivers and make sure it's enabled it should work
@@snapy3855 go to settings > devices > "devices and printers" > right click ur controller > properties > now kinda tricky but nps > go to each driver and make sure to open it with "open changes or something like that "> window will pop > click drivers.. and enable that device you might haave to check for all the drivers and make sure it's enabled it should work
Used this tutorial to overclock the usb bluetooth adapter and it worked!!! Use the DS4 software to then change the polling rate to 1ms and that's it!!!
Does it really work with the xbox adapter? I just bought the seriesx+adapter and playing wireless now. Was wondering if this overclocking would work with my setup.. Are you sure this worked?
I did a test with a web browser stopwatch, and I went down from 11ms to 8ms, not even considering added browser lag. So yeah, if you want really low input lag, use an Xbox One bluetooth controller, but with a USB 3.0 cable or faster.
when I used a polling rate tester on my xbox one controller after overclocking it stays at a 7ms average, but when I overclock my PS4 controller it averages .50 ms, so why doesn't the overclock work on the xbox controller?
same thing happened to me.. been reading everywhere that the hardware inside the Xbox controller is set and stuck at 7-8ms /: once I found that out I said fuck it and bought a ps4 scuf and it’s so much better.. wish it worked on Xbox controllers though /:
do you have to play with it plugged in for this to work? i did all this with my wireless controller and it shows the box as white instead of green and theres no number 1 its just a blank box..
@@cillyprodd no unfortunately, I got some responses saying yes and no on other videos so that confused me more. I just got the usb because I know that works for sure. Just gotta ignore the cable
github.com/LordOfMice/hidusbf
@iTwiste Probably
it gives me a error 577 thing
@@squizyszn7497 yea same here ppl jus clickbait to get the views then get bots to comment that it works then ppl believe it, why do u think he hasn’t answered anyone who said they had a problem
Why can’t you help the people with issues
Please help
For those trying this after seeing Aydan's video. I'm on W10 x64 and had issues. To solve them, you need to go into your BIOS and disable secure boot before you commit to the filter on device step. There's some security signing or whatever that wasn't done by the app developer so this version of windows will reject the driver unless you have secure boot disabled. I had ignored the issue but it bricked my controller. I had to reset the controller driver then disable secure boot and then finally I was able to complete the steps. Thanks for bringing this overclocking to light Nameless and Aydan. Excited to see how it impacts my gameplay
what kind of issues ?
@@Sterbenys There was a warning message when I tried to install the filter on device setting. I ignored it and the controller wasn't being picked up by warzone. I reset the controller driver and it was fine again. then I had to disabled secure boot. then the steps worked fine. So if you see a warning, you can avoid about 15 minutes of hassle by disabling secure first. Otherwise, you're just good to go.
@@iammars142 huh i did this exact stuff on this video 3hours ago still works fine no issues on my end
@@iammars142 how do you reset your controller driver? I made the same mistake lol
@@joshpeterson5304 I don't remember. Haven't messed with this in a while. My guess would be to go into your device manager and right click on the controller. There are some options there.
This makes so much sense now. I've been having issues with not being able to pick stuff up unless I stop and hold x for a second. I can't run and loot
This is amazing, what a game changer! Felt the difference instantly!!! Thanks for sharing!!!
I know other top youtubers say the xbox remotes get no added benefit but it depends on the quality of the brand obviously. For instance I tested on a MSI MC30 v2 remote and wireless it makes no difference overclocking it keeps on 16ms average but if you use it in wired mode it goes from 4.4ms average to just 1.9ms average. So this is still a win in my books
never thought i would ever be saying, but thank you nameless. truly man, thank you and stay blessed
works like a charm! have been strugling with constant input lag on rocket league and i can immediately feel the difference thank you :) ❤
This is legit?? I gotta try it cause rocket league is pretty much unplayable for me with all the input delay
@@Punisher-qe6kp yup it really helps. still using it :)
@@m1kkee does it also work with an xbox controller using bluetooth?
@@josefsaredahr play wired if possible, if you play with bt rn trying wired is the first step to decrease input lag.
@@m1kkeewhat about with Xbox wireless adapter would that identical to being wired?
anyone notice how his camera zooms like 300% in lmao. gave me a chuckle
tf you talkin bout
@ ikr
For anyone getting errors. You have to load an unsigned driver. The Secure Boot Windows UEFI option in BIOS settings maybe preventing it from loading the driver. So in Boot Options find Secure Boot and set the OS Type to Other. Otherwise google How to load an unsigned driver, it's annoying to do it any other way every time.
@@AP-fb6ry Yes. That's what happened on my gaming PC, and I compared it to the PC I used before, and that was the difference for me.
Just fresh installed my PC and its windows 11, getting this error message. I secure booted to allow the unsigned driver, installed and then restarted my pc but then the controller doesn't work. Cant not run windows secure boot because anti cheats need this.
You are the smartest man in the world thank you bro
Can I turn secure boot back on after?
@@loganjohnson8797 yes, for me I turn it off when playing cod, and then when playing valorant I turn it back on. It's a little tedious but hey it takes 30seconds.
For PS5 controller you have to set it to 8000 not 1000
Yep. I was stressing for a bit lmao, this comment should be pinned
i cant find 8000
I always get driverproblems with ps5 controller is it because i have to set it on 8000?
@@ChopyTweakssame
@@yoitsneel3164 dont filter it will give you driver errors
This was one of the best tutorials ever lol
simple, not too fast, and it worked first try.
It was okay, he coud;ve explained how to change values at 3:14 but im sure everyone knows how to do that...
@@kennethhernandez6707 that is my main issue. its a good video if it works without any problems and everything goes exactly how it goes in the video. If it doesn't then no other solutions or help is offered.
@@kennethhernandez6707 my value is at 4 for this step and i dont know how to change my values... help!!!
@@ray534 same lol
I love how you repeat the stuff again and again appreciate that man
honestly didnt think this was gonna do anything. was completely wrong. you can tell immediately. so much better!
everytime i press install service the application closes and deletes itself
Clutch. Just got back into the new cod, first time playing cod since BO2. Bought a new controller as well, since i'm on PC. This was dope!
this made a huge difference in my gameplay , i appreciate you for making this tutorial
Bruh.. thank you so much for making this the easiest I've seen
Here from Aydan's video
same
^
Same
same
For people that don't know you don't have to click install service 3 times the directions are on the page when you download it you only have to install the service once then put it to 1000 hz and filter it. You also don't have to unplug the controller you can just hit restart and it will update if it doesn't update then you can unplug the controller and plug it back in.
i done wat he did and now my controller doesnt connect?
@@1235-b6j Does it say its at 1000hz? If its not working try unplugging it a few times. One time I did it I had to unplug it like 3 times. If it still doesn't work at 1000 try setting it to 500 and if that doesn't work then set it back to default then untick filter.
@@1235-b6j Sadly some controllers can't be overclocked always. If its a ps4 or xbox controller it should work though.
@@imaSoldier187 for some reason I can't change the 5 to a 1....I had the same problem as the other dude commenting below as well and I'm wondering if that is the issue. PLS SEND HELP smh
@@mrdirtysauce There is a ton of answers in the comments below. I would disable secure boot if you haven't make sure you save the settings in the bios. If it doesn't turn green I would reverse all the steps you did with the program make them all default again untick filter on device set rate to default restart then reapply the settings if it still doesn't work try another usb port. I always get mine on green 1000 rate but sometimes once in a while it goes red randomly. The last thing I would do is a hard reset, shut down the computer remove power plug hold the PC power button to drain all stored power for about 5-10 seconds plug the cord back in and fire the pc back up.
Thank you my guy this was a super quick informative video. So sick of time wasters. Thanks for saving mine!
hmmm, doesn't seem to work for an XB Elite controller...I doesn't show up as HID compliant, and I can't change the binterval, which is stuck at 4. Also, I get a bunch of warnings when I try to enable filter :/
Works now
I was skeptical at first, but it works very well 🤙🏼
yo do you have any idea why i cant find my controller on it
OMG BRO!!!!
I saw many videos and you are the one who explains better and more simply
THANK U. Im passing of 4ms to 1ms
Do you use a wireless Bluetooth controller??
best video for OCing your controller by far!!!
massive improvement in gameplay, cant believe i have been playing for this long without being OC'd
Does it not mess anything up?
@@zachmcferrin5111 probably drops FPS
Ty bro been looking for this!
FOR ANYONE THAT IS HAVING ISSUES WITH A RED BAR OR SOMETHING SIMILAR. when you click install service a new window should pop up or a loading bar should pop up, i got the red bar when niether of those popped up. i then manually reverted what i installed on the controller to its defaults, and i tried it again, the first time you click install services it should ask you if youre sure and then it will download it. and each time after that it should just show the download bar really quickly.
i get an error 577 when clicking the filter check box any idea why ?
great video, just did it and wow it feels so nice when playing
glad you like it!
I did it and my controller feels weird maybe I followed the wrong steps could you help me?
@@OGNameLeSs dude please help me fix my controller
Works perfectly with my Xbox one Power A USB controller. Much Appreciated.
Did the description for your Power A controller look different than what was shown in the vid?
@@randomwarzoneclips4904 don't remember
CMG admin - "We have found a supcious program and you're banned from our platform"
for real?
No shot?
what is CMG??
if this broke your scuff controller like it did to mine don't worry. Completely uninstall his programme , then use your scuff key to restart your controller, this should work i had to restart mine twice for everything to go back to normal. SUB if you want fortnite content. I don't appreciate this guy not helping anyone he's fine when people are praising him
BRO I NEEDED THIS INPUT LAG BEEN PISSING ME TF OFF
br ofacts this shit is killing me FDUCK
This won’t help you really, get a monitor with a higher refresh rate, if you get FPS.
Thanks bro explained this better than everyone i watched
thank you brother. Most simple instructions i've ever received regarding overclocking your controller. Haven't been able to do it since now.
so is the controller changed or the software on the computer. can i use my controler on another device and will it have the overclocked settings?
@@ammy-td9tr this is only for your controller on PC. Settings don’t transfer
@@Katunar_shqiptar does it also work with an xbox controller using bluetooth? because my controller isn't showing up on there
@@josefsaredahr I believe it should. My apologies if I’m wrong but your controller could be popping up as an audio device or something similar. Just go to all devices, plug your controller in or already have it plugged in, then plug it out to see what your pc recognizes it as. Then follow the instructions he gave.
HAPPY BIRTHDAY NAMELESS...!!!!! 🎂
Let’s go Nameless!
Wow, this actually works very well. Thank you for sharing.
So we’re making the USB connection check more often to see if there has been a change or updated instruction. Why didn’t we stick with the old ps2 Port from the 80s which waited for new instructions to be sent? Linus did a video comparing the two connections years ago and there were some competitive players who intentionally played with the ps2 Mouse because they said it felt faster. It looks like someone should revisit the comparison.
actually the diffrence between usb and ps2, USB gets refreshed every "tick" by the cpu to check if there was a signal sent, PS2 in the other side sends the signal to the cpu saying "hey i clicked here" instantly, making it faster for sure, there's adapters (usb to ps2) and the mouse should be working if u use that :3
Thanks, very cool.
it's only faster if you have a weak cpu. if you are not an esports player with immaculate reflexes, you will hardly notice the difference between PS/2 and USB
Wow dude, noticed the difference instantly. Thanks!
Big W
Were you able to get it?
Mine stays red ?
For anyone having error 577 look up "Error 577 hidusbf fix!! By art Lopez. If you don't have the entry that you need to change you need to add it by right click select new dword 32 then follow the rest of the direction on the video.
Tried using a PS4 controller, it worked for me. At first I got a red error over the driver but you need to go to Device Manager, Right Click the USB Drive in Yellow --> Update the Driver --> Select from Driver List --> Wireless Controller then it worked for me. Or you can uninstall the driver in Device Manager and reboot the computer.
What controller are you using. My raiju shows up red. I will try this though when my new pc gets here.
Solid explanation throught the entire video, thank you!
Hey Nameless, thanks for tips I saved this until I got my pc. Great Instructions!
you're the goat for this
Thank you so much! I'm not a bot FYI, but this helped me bc my Scuf had a bit of lag, pog u my guy
I came here because of the Crim interview when Paco says he loves your overclock video 😂
Video starts at 1:18
I see everyone talking abt the error that it gives u, basically restart your computer go into your BIOS and change Secure Boot off
i can find tjat scure boot option, where is ti?
Are you able to respond to the users that have problems. It's all the same, ERROR 577 when you press ''Filter On Device''
Have this as well
Hi this is an extremely late reply but if you or anyone else in the comments is receiving error 577 or a warning when you enable filter on device, you need to disable secure boot from your pc's bios settings. Once you have disabled secure boot redo the steps as outlined in the video and it should be successful!
@@adoxgaming do you have to? Or can you run it anyway?
For anyone whose PC suddenly stopped recognizing their controllers:
Connect your controller with your micro usb
Run Setup
Hit "all"
Highlight the red bar
unclick filter
set the interval to default
hit "restart"
unplug, and plug back in
Thank you 😭
Thanks man I freaked out.
When i use filtrer on device its not working but when i use without filter on device its works but my nummber is 4 not 1 please help
this helped so mcuh youre the man!
Tried this now my controller connects to my PC😃😃😃
before he got popular 😱😱
Wow appreciate this video
A friend told me that it was possible to change response time of my controller but I didn’t know how 🙏🏽
THANK YOU SO MUCH NOW MY PC DOES NOT RECOGNIZE MY CONTROLLER
mine either rip
Put it on default
Dummy
Go into your devices Uninstall your controller then plug it back in and it will work.
Same I did this and now my ps4 controller won’t connect to my ps4
What's funny is all the videos of people setting their polling rate on Xbox controller to 1000 and not checking the response time afterwards to notice that even attempting to change the polling rate actually impacts the response time in a negative way reducing it by 25% from 120hz to around 80-90hz. Then the guy in the video is like "I've been completely pwning noobs with this overclock!" not realizing his controller is now objectively worse..
Thanks for this awesome video man! One question, will this feature still work having the controller connected through Bluetooth? Or would I have to keep it connected at all times?
i have the same question did u get the ans?
@@meerabdulnadeem5714 To be honest, I can’t really tell the difference between having it plugged in and having it connected via Bluetooth.. i’ve been playing for the past month is my controller connected to Bluetooth, so my plan is to for the next couple of weeks to play with the controller plugged in to see the difference
@slitt After a few months, connected is the way to go to get that .5 millisecond speed for sure
brother thank you sooo much this helped me out sooo much
When I replug it in the whole bar is red and I get a 577 error... what do I do?
FOR ANYONE THAT IS HAVING ISSUES WITH A RED BAR OR SOMETHING SIMILAR. when you click install service a new window should pop up or a loading bar should pop up, i got the red bar when niether of those popped up. i then manually reverted what i installed on the controller to its defaults, and i tried it again, the first time you click install services it should ask you if youre sure and then it will download it. and each time after that it should just show the download bar really quickly.
its because when you press "filter on device" it may give you a pop up. If so, first, go into device manager and uninstall your controller then unplug and plug it back in. You then just have to go into your bios and disable "secure boot/startup". It worked for me
Still watching in 2022, bless your soul
mine says 5 and doesnt give me the option to be able to change it
same
Love you Brotha!💎💙
my binterval wont change to 1?
same
Same
Thank you this has helped my performance
Step 1: Download the link in the description.
Source: Trust me bro.
It actually works tho lol
The best way to tell if someones download link is legit is to do the following things;
Check the like to dislike ratio. A lot of dislikes, dont click it. A lot of likes and very very few dislikes, should be fine. If they have like rating turned off, leave immediately.
Check the comments, do the comments seem like bots are typing it out? Sort by new and see what people are saying. You should be able to tell whos a bot and whats not.
Subscriber count is also a good way to check. I'd say reputable starts at around 10k+ but you can never be too sure.
Lastly, anti-virus or virus total the link. Simply run it through a site that checks if it contains malicious files. Keep in mind some programs or files may contain something called false positives, essentially meaning the virus checker sees something malicious but in reality its not and it's just detecting that because the nature of the program, you can look more into that if you're still suspicious.
@@vyncz7451 Fatcs
@@aledabestt can no longer connect a controller via any route... any idea what to do?
@@Parsinen257 uninstall the drivers and install them again
Dude ngl my shit was at 6 wondering why I felt life shit but I alwsy come back n redo this every 3-6 months
I run into trouble in the filter step. It gives me an error and won’t let me turn on the filter when I try to install it
Thanks man! Solid Video!
I changed mine to 1000 and nothing happens. The blnterval has nothing in the box and i can not type in it.
same thing happened to me, any suggestions on how you fixed the issue?
@@ghoulzero3873 have u fixed the issue, i need help
This works greats. Just did some testing and there is a difference. At first I thought that it was kind of off playing with it and then remove it and put it back to normal for a day. Then I came back and installed the 1000 polling rate at 1ms response time. Yes it's a better response for gaming with a controller.
what happens when the controller doesnt pop up?
@@ethan3587 across the top menu left of the word device there is a drop down and select all. This will bring up all devices plug into your PC. If your not sure which one it is unplug it then plug the controller back in. Note this is for devices plugged into PC driver software. Not sure if this works on consoles. Pay attention. On the video and follow the steps. Once it's set you unplug your controller and plug it back in and you should see Yes under Filter which you want on, 1000 under Rate and a 1 under blnterval column. You do not need to do this each time you start your PC. Set it once and its done. Hopefully this helps.
just did this and now my scuf won't turn on
Same
Same
Did you find a fix??
@@bewbathis_3211 just reset everything. And use usb cable input is way better
I did it too and it works good on pc just not on a console
nice video mister double epic
I get a warning sign and it turns red. My blnterval disappeared and child names disappeared
same
Same here anyways to fix this
@@justinduran4438 same happened to me, you just have to click Restart, unplug and plug back in and looks like it fixed for me
its because when you press "filter on device" it may give you a pop up. If so, first, go into device manager and uninstall your controller then unplug and plug it back in. You then just have to go into your bios and disable "secure boot/startup". It worked for me
@@iitchyboto isn't disabling the secure bootstrap dangerous in some occasions? do i activate it again after overclocking my controller
Subbed! YoU are the man!
was anyone else having a problem on that final step ? after i check off the filter on device box. The device name column was highlighted pink with no milla sec response time number !
Do you know how to fix it, it happened to me
How do u fix
go to settings > devices > "devices and printers" > right click ur controller > properties > now kinda tricky but nps > go to each driver and make sure to open it with "open changes or something like that "> window will pop > click drivers.. and enable that device
you might haave to check for all the drivers and make sure it's enabled it should work
@@fyahface2519 go to settings > devices > "devices and printers" > right click ur controller > properties > now kinda tricky but nps > go to each driver and make sure to open it with "open changes or something like that "> window will pop > click drivers.. and enable that device
you might haave to check for all the drivers and make sure it's enabled it should work
@@snapy3855 go to settings > devices > "devices and printers" > right click ur controller > properties > now kinda tricky but nps > go to each driver and make sure to open it with "open changes or something like that "> window will pop > click drivers.. and enable that device
you might haave to check for all the drivers and make sure it's enabled it should work
don't think it works as much now? Used to work on ps4 controller but my ps5 just turns red.
Thanks man it worked instant on my elite 2 controller.
did you set it to 1000? I have read a couple people online say it cant be put to 1000
@@jjk7751 yes follow the video
Does this work for the Series X (or any console) too after doing this? Or is PC the only way?
Pc only but not sure tbh
Used this tutorial to overclock the usb bluetooth adapter and it worked!!! Use the DS4 software to then change the polling rate to 1ms and that's it!!!
for my xbox controller, i can't get it to filter and it has a 4 binterval
I have the same problem
i’m having the same problem on my elite controller only works if i uncheck “filter on devices”
Great work my man 👍😎
i keep getting a error 577 when i put the filter on and it doesnt say how to fix
Same
@Sycom I went to do that and safe boot was already off so this doesn't fix anything bro
YOOOO THIS VIDEO WAS SO GOOD THANK YOU
if you did it on computer can you unplug it and plug it into your xbox or ps4 and would it still have 1ms response time?
No
worked a treat, even on my xbox elite 2 controller, using a wireless xbox microsoft adapter. Thanks a lot.
Does it really work with the xbox adapter? I just bought the seriesx+adapter and playing wireless now. Was wondering if this overclocking would work with my setup.. Are you sure this worked?
@@Glyx360 it did work mate yeah if you’re playing on pc, if you’re playing on Xbox one X then I don’t know if it would work 👍🏻
would this work for me without plugging in my xb controller? i can do the steps nameless mentioned wirelesssly?
The man! great video
I did a test with a web browser stopwatch, and I went down from 11ms to 8ms, not even considering added browser lag.
So yeah, if you want really low input lag, use an Xbox One bluetooth controller, but with a USB 3.0 cable or faster.
when i pluged mine back in the name and everything was red
so did it still work
Same
when I used a polling rate tester on my xbox one controller after overclocking it stays at a 7ms average, but when I overclock my PS4 controller it averages .50 ms, so why doesn't the overclock work on the xbox controller?
same thing happened to me.. been reading everywhere that the hardware inside the Xbox controller is set and stuck at 7-8ms /: once I found that out I said fuck it and bought a ps4 scuf and it’s so much better.. wish it worked on Xbox controllers though /:
OMG guys.. it really works just run the program as admin and follow step by step .
I'm getting an error when I'm trying to filter on device? Thoughts?
yeaaa me too i dont know what to do
Same and i cant change the number from 4 to 1, he says make sure to change it but i cant and he doesnt explain how
@@oGenixOfficial look on ur bios and see if u have secure boot on and if so turn it off and then try it and see 🙃
do you know how to fix this
I haven't tried but liked the clear instruction.
hey man, great video! Very straightforward and professional, but i have a problem. the blnterval isn't on 1 if anyone can help, please do!
did you ever figure out how to get it to one?
@@Dmartinone3 Hey i need some help
This is mind blowing 🤯
so how does this work for an xbox series elite II that uses the USB stick?
did u find out ?
My elite II doesn't use USB stick, I'm USB wired and it wouldn't switch input to 1, and deleted child name.
you got a new sub fam. preesh.
i have the xbox elite series 2, will this still work
It broke mine
@@fyahface2519 on god
@@fyahface2519 still broke?
Dope video I've done it in the past but you explained it perfectly!
Never knew this but i don't have my controller plugged lol
do you have to play with it plugged in for this to work? i did all this with my wireless controller and it shows the box as white instead of green and theres no number 1 its just a blank box..
@@hangtime104 did you figure it out don’t have a usb
@@cillyprodd no unfortunately, I got some responses saying yes and no on other videos so that confused me more. I just got the usb because I know that works for sure. Just gotta ignore the cable