I know other people said this 100 times, but fr thank you for not clickbaiting, extending the video for watch time, and explaining things in a clear and concise manner!!!
Perfect video, everything works just fine. If you are having issues with your ps5 controller bInterval being stuck at for do this: 8000 > Install service > Unplug then replug your controller back in. Should work flawlessly!
@@REELOADED dude i realized how stupid my comment was over a course of a week then came here to see all thr sarcasm and it made myself laugh so hard. Saw a 23 minute video of this overclock method and it explained everything!! Also how to check lag input and DS4 windows cloning the control to be detected as xbox in order to test lag input. .... im an idiot. Lol
For anyone having error code 577, unplug your controller, take a pin or a paper clip and reset your controller by pressing it into the small top right hole on the back of your controller which is the reset button and holding it there for like 10 seconds. This worked for me and allowed me to overclock it without the error popping up. If you did click yes when the error popped up and messed up your driver, uninstall the damaged driver in Device Manager on your PC and then plug your controller back in
For those who dont know you'renot actually overclocking your controller,whats being overclocked is the USB port...You cant take the controller and plug it to your console it wont be overclocked,only that port which the controller was plugged into on the PC will be overclocked... So make sure to plug your controller to that specific USB port when playing...
@@pedroguerreiro2337 I'm assuming so since it's the USB port that's being overclocked whatever you plug to that port it should have the same effect on the device…. Try it and see
Common errors I found fixes to: 1. If you are getting errors disable secure boot in your bios. 2. If you are on ps5 and you're interval is stuck at 4. Try using 8000 instead of 1000.
i didnt know that its common for ps5 scufs to be stuck at 4 your comment really helped me fix the issue. i have been looking for this info for months and a couple hours today thank you so much!
note: you only need to hit install service once. installing the service is just linking the program to your usb driver for the controller allowing the program to modify the values.
For anyone still looking for a solution to red colored box and controller not working after this, in windows 11: 1. Open the registry editor on W11 (regedit). 2. Go to this path "Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Policy". 3. Add a new DWORD (32-bit) value, name it "UpgradedSystem" and leave the value on 0. 4. Restart PC 5. Follow the usual steps to overclock your controller as you did on W10.
this is not working for me, my regedit has EmodePolicyRequired, SkuPolicyRequired, and VerifiedAndReputablePolicyState entries in that directory. I'm not very computer savy so I dont know what to change
Works good for me i use a mouse and a ps3 navigation controller instead of a keyboard. 1000 is the polling rate which is how many times it reports info usually it is 250 i believe.
Are you directly plugged into your pc with the navigation controller? Or do you use something like a XIM apex to be able to use a mouse and navigation controller?
Is there any other way of doing this? I followed every step but when i go to press on devices, all of a sudden it crashes and says "not responding". It happens every time and i have no other way of overclocking my controller.
Just wanted to know after doing this do you have to keep it open while playing or can you close, and if you do hav to keep it open, when you restart ur pc do u have to do the same steps again
When pressing "install service" the "open file" popup where you hit "open" would not appear. I had followed all steps correctly. I uninstalled winrar and extracted the files through windows. This solved my issue. If you are having trouble, uninstall winrar.
i followed your tutorial and it's put a red bar on on every section on my controller and my blnterval/child name is blank, any tips would be greatly appreciated
@@Aalejandre2410 i have unfortunately not been able to fix it yet, i just switched the usb inport on my pc for my controller cable and i've not been bothered to try again lmfao
FOR EVERYONE WITH ANY ERRORS WHEM OVERCLOCKING. Go to Lqwid’s channel and watch his overclock tutorial he shows you how to bypass the annoying error that you get. And if you messed up that usb/your controller it’ll bring it back to normal when you follow his step.
@@terrancejones3135no one will be able to tell the difference between 1ms and 5ms delay in a blind AB comparison, but worth doing as you are still faster
i wish someone would mention how this doesnt work on xbox controllers.... you can overclock it but if you download an input tester or even play a game youll notice its stuck at 7ms due to the factory hardware in the xbox controllers. xbox controllers stuck at 7ms and ps controller can get down to literally 0ms.... its a no brainer i had to cop a playstation controller
Yeah, and also I wish people asked if you needed to be connected through usb or if you can do it via wireless connection. I thought my problem was that my controller was connected via bluetooth and not wired. But it might be because it's an xbox controller like you said, or it's just both.
There 0 ms is fake. In reality is sub 1 ms. But there is more to it than that. High polling rates actually hurt more than they help. But no one will ever think to try other wise. If u know u know
@@Ehonda24 its physics man. The analog sticks can only do a 1000 hz. Stuffing the controller with higher polling rates will just cause delay. Placebo works wonders. People get horny when they c the zeros lmao
Idk y people r replying yes, it literally would affect 1/1000000 gunfights, but it’s very easy to do so u might as well, I already did this months ago and didn’t notice any difference
can somebody help me with an issue im having please. whenever I open setup it opens for a second and closes immediately. this also happens with some other stuff that I download and yes ive tried running it as admin but I still have the same issue
can someone help me undo all of this? asking because i have windows 11 and literally cannot perform this operation. I did not know that. I tried to do this and now my PC will not even recognize when the controller is plugged into the computer. please help
yo i havw windows 10 but it happened to me because i didnt disable it so judt go to devices and then click on your controller and click remove and then just plug it back in
Seems to have worked on my Scuf Instinct controller for Xbox. I was skeptical because I heard normal Xbox controllers weren't overclockable but it felt like a big difference to me. Doesn't seem to work very well on my Turtle Beach Recon though, rate goes to 1000 but Bintervals stay the same. Might help a little bit but idk
@@thomasebbs8506 ps4 controller max overclock is 1.0ms(1000hz), ps5 max overclock is around 0.5ms-1ms (8000hz-1000hz) and varies dependent on cord and usb port used, xbox max overclock is 4ms(250hz)
bro i tried doing it and it messed up my controller and i couldn’t connect it again. i fixed it so it can connect now but how should i over clock it now?
READ THIS: YOU must disable SECURE BOOT AND MEMORY INTEGRITY (If your pc has enhanced security in windows 11) in order to overclock your controller. Is it worth your pc being at a risk from malware? Secure boot maybe not but memory integrity is a pretty big leap from microsoft in security features. So basically play on a pc with more input lag and more security or less security and less input lag.
I’ve tried this before and this is a simplest easiest video on this last time I tried. I got like 10 error codes every time and was confused why I didn’t work fall this video exactly and it worked perfectly. I can’t even explain how pissed I am right now because I should’ve did this shit two years ago. Thx bro
For those of you getting error code 193 - make sure to turn off Memory Integrity setting. Took me an hour to finally get it working. If after disabling Memory Integry, it still shows red bar, you have to make a registry edit, there's a video out there, I forgot what the exact location was but it fixed it for me.
I know other people said this 100 times, but fr thank you for not clickbaiting, extending the video for watch time, and explaining things in a clear and concise manner!!!
w comment w chatter w person
hes a pro he wouldnt clickbait
I did everything right but when I filter it’s turns red and doesn’t work
Same for me bro, did you already have it or?? Plz let me know
@@spookeu_3715 disable secure boot in your bios settings and try again. 99% sure that's the culprit
Perfect video, everything works just fine. If you are having issues with your ps5 controller bInterval being stuck at for do this: 8000 > Install service > Unplug then replug your controller back in. Should work flawlessly!
thanks brotha
You’re the goat
When I got to click install services it doesn’t pop up yes or no at all any fix ?
but should I leave it at 8000? because when i put it back to 1000, it take it the bInterval to 5 again
Does it have to be in the charger to work on the new input?
Every time I buy a new controller, I come back here again. You really the GOAT for this one.
get hall effect
@@xSeeyastill has way higher input delay, just no stick drift.
@@kylevos8551 this is not true
@@xSeeya hall effect is ass cause of the input delay, n u want a lil drift on your roller anyway so aa is always locked
Do I have to leave the “setup” tab open while I launch games or can I “install service” close it ?
I’ve come back to this video at least 4 times. You’re the man!
NEW COD IS HERE AND THIS VIDEO IS STILL VALID!! THANK YOU 1 MILLION TIMES!
do u get banned for it?
@@Falafel_ no
I seriously like how short your videos are and straight to the point
For those who are using a ps5 controller, after doing the 1000 do 8000 and then disconnect and reconnect controller. it worked for me! ty
@@Foever378can’t over clock on console
thank you!
@@REELOADED dude i realized how stupid my comment was over a course of a week then came here to see all thr sarcasm and it made myself laugh so hard. Saw a 23 minute video of this overclock method and it explained everything!! Also how to check lag input and DS4 windows cloning the control to be detected as xbox in order to test lag input. .... im an idiot. Lol
Watched several videos where it explained 1000 works better.. but its subjective
Ty bro mine was on 4 instead of 1 now its 1 ❤
Good explanation, short and informative!
Keep the the grind going Shotzzy! 👍
Do I need to keep my controller plugged in? Or does the overclock also work wireless now?
For anyone having error code 577, unplug your controller, take a pin or a paper clip and reset your controller by pressing it into the small top right hole on the back of your controller which is the reset button and holding it there for like 10 seconds. This worked for me and allowed me to overclock it without the error popping up. If you did click yes when the error popped up and messed up your driver, uninstall the damaged driver in Device Manager on your PC and then plug your controller back in
What’s the damage file name? Where do I find that in device manager?
im having an issue where the controller thing on the overclocking software it shows red, no Binterval and no child name???
so i couldve done this instead of factory resetting my pc...
still no work, same error no matter what i do. 2 years i havent been able to get this to work. 2 fucking years.
@@FlawsReal i swear been trying for over a year and still get an error code each time
youre the only one who has explained this perfectly. the other guy that i tried this off of last night i thought broke my controller. Thanks!
\
do u get banned for it?
@@Falafel_ no you don’t. But believe that have taken the ability to do it out because my shit has not been right all year
Short and sweet, gotta love it
just like you
@@ploieyfn you’d know wouldn’t you?
short, sweet, and to the point. 10/10
Thanks! very informative and right to the point.
2:21 long, took me 45 seconds to figure it out, watched another video that was 15 mins long and was stuck on it for almost an hour. thanks dude
Dude thank you for making this so easy! Haven’t seen your content before but now I’m subscribed. I appreciate the help
Easy short and no to much talking or showing gameplay love it.
Welcome to the greenwall u beast.
Here before he's in optic
Here after he has won major 1 with optic
W
Here after he played Xdefiant with Optic
Here after I took a monster shit while he's on optic 😂
@@cptobvious1228here after he put on ATL FaZe on skates
For those who dont know you'renot actually overclocking your controller,whats being overclocked is the USB port...You cant take the controller and plug it to your console it wont be overclocked,only that port which the controller was plugged into on the PC will be overclocked... So make sure to plug your controller to that specific USB port when playing...
So doesn’t work with bluetooth?
@@mackdaddypeypey1 No it doesn't, it has to be plugged to USB port
So i can overclock my mouse?
@@pedroguerreiro2337 I'm assuming so since it's the USB port that's being overclocked whatever you plug to that port it should have the same effect on the device…. Try it and see
So I don't have to overclock my new controller if I use the same usb port?
Common errors I found fixes to:
1. If you are getting errors disable secure boot in your bios.
2. If you are on ps5 and you're interval is stuck at 4. Try using 8000 instead of 1000.
how do u open bios and disable secure boot pls?
@@reddevils4823 look it up. I don't want to give you false information
W tip 2
i didnt know that its common for ps5 scufs to be stuck at 4 your comment really helped me fix the issue. i have been looking for this info for months and a couple hours today thank you so much!
@@megs9801 Glad I made someone happy today. 🥲
Your one of the most helpful pros there is, respect bud
Would the steps still be the exact same even if he made the video a year ago ?
@@jazcrisac8777 I believe the steps are the same and most people use this overclock method
For everyone getting an error you have to disable secure boot in the bios
goat
goat
Should I enable the secure boot after I finish this video. It did work with disabled. Thanks.
I do this. I’m trying to find an alternative as this will no work with Vanguard.
Where do i find the secure boot
Thanks for the tutorial, really helped
note: you only need to hit install service once. installing the service is just linking the program to your usb driver for the controller allowing the program to modify the values.
Wait so every time I launch my pc do I have to install service again
I did everything right but when I go into the game, I have really bad analog lag, idk how else to describe it
@@sleer6306 I've only had to redo the overclock once since the first time. I check it occasionally and I haven't had to redo it since then.
@@spendamil5777 what type of controller do you have and have you updated your windows drivers? Also are you wired or wireless
@@itzscop3 scuf impact, for the ps4. I play on pc with it, I've installed the latest drivers and im wired
I was having a hard time finding the best video on a tutorial. You helped me the best 👌
Best video I’ve watched for controller settings🥶
yoo thanks, just bricked my controller
Me too
@@mattshires3262bro t is necessary to use the ds4 windows or only with the hidusbf I can play
For anyone still looking for a solution to red colored box and controller not working after this, in windows 11:
1. Open the registry editor on W11 (regedit).
2. Go to this path "Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Policy".
3. Add a new DWORD (32-bit) value, name it "UpgradedSystem" and leave the value on 0.
4. Restart PC
5. Follow the usual steps to overclock your controller as you did on W10.
Thank you this worked for me
i love u
can you help me
Worked perfectly man, thanks!
this is not working for me, my regedit has EmodePolicyRequired, SkuPolicyRequired, and VerifiedAndReputablePolicyState entries in that directory. I'm not very computer savy so I dont know what to change
everything works until the end when i click on filter
Love the video shotzzy 🔥
No Bs . Straight to the point. Thanks
I downloaded this and used a Duel Shock 4 controller. This seriously helped me in Rocket League, Thank you
For those of you using PS5 controller make sure to use 8000 instead of 1000.
I scrolled down to find this comment and i did... ty bro
Pls someone help! My mice does not connect to my pc after this!
i hoping to find this comment , appreciate it !! ty ty
My binterval says 6 instead of 1
There is no option for 8000?
Nothing is popping up for me when "Install Service." Need help!
yeah same i need help.
im back, i had to watch it again because it wiped the setting for whatever reason... thank you for the third time shotzy
Shout-out to Tiff for telling chat to come here for this. This video is sweet and simple to follow thanks Shotzzy
Love you shotzzy but I think every step was the most important step somehow😂
Works good for me i use a mouse and a ps3 navigation controller instead of a keyboard. 1000 is the polling rate which is how many times it reports info usually it is 250 i believe.
Are you directly plugged into your pc with the navigation controller? Or do you use something like a XIM apex to be able to use a mouse and navigation controller?
Do what? Can you explain?? Use control and mouse??
Is there any other way of doing this? I followed every step but when i go to press on devices, all of a sudden it crashes and says "not responding". It happens every time and i have no other way of overclocking my controller.
Shotzzy ,Thank you bro! Have a great day man
This changes the game big time thanks for the help
Just wanted to know after doing this do you have to keep it open while playing or can you close, and if you do hav to keep it open, when you restart ur pc do u have to do the same steps again
Can someone answer this man? lmaoo
No you dont have to keep it open
why is it gone red? can anyone help ?
Just tried doing this and have this problem, did you ever figure it out lol?
When pressing "install service" the "open file" popup where you hit "open" would not appear. I had followed all steps correctly. I uninstalled winrar and extracted the files through windows. This solved my issue. If you are having trouble, uninstall winrar.
I have the same problem and what you did seems to not fix the problem for me idk what to do
@@stefanbogdan1898 figure it out?
@@washergoat5344 you gotta disable something in the advanced startup
i had the same issue but it did what it was supposed to do without having to open anything.
an actual good tutorial? love to see it, thanks G
still helping me overclock my controllers to this day
i followed your tutorial and it's put a red bar on on every section on my controller and my blnterval/child name is blank, any tips would be greatly appreciated
How did u fix this bro?
@@Aalejandre2410 i have unfortunately not been able to fix it yet, i just switched the usb inport on my pc for my controller cable and i've not been bothered to try again lmfao
FOR EVERYONE WITH ANY ERRORS WHEM OVERCLOCKING. Go to Lqwid’s channel and watch his overclock tutorial he shows you how to bypass the annoying error that you get. And if you messed up that usb/your controller it’ll bring it back to normal when you follow his step.
Coming back to playing COD from years ago but now im on PC and i didn't even know this was a thing!!!
same, im running 0ms on my ps5 controller now
Do you notice a difference
@@terrancejones3135no one will be able to tell the difference between 1ms and 5ms delay in a blind AB comparison, but worth doing as you are still faster
i wish someone would mention how this doesnt work on xbox controllers.... you can overclock it but if you download an input tester or even play a game youll notice its stuck at 7ms due to the factory hardware in the xbox controllers. xbox controllers stuck at 7ms and ps controller can get down to literally 0ms.... its a no brainer i had to cop a playstation controller
Yeah, and also I wish people asked if you needed to be connected through usb or if you can do it via wireless connection. I thought my problem was that my controller was connected via bluetooth and not wired. But it might be because it's an xbox controller like you said, or it's just both.
@@chobyghee1593 You should never use bluetooth connection on your controller regardless. Bluetooth itself causes slight input delay
There 0 ms is fake. In reality is sub 1 ms. But there is more to it than that. High polling rates actually hurt more than they help. But no one will ever think to try other wise. If u know u know
@@chillysam1526 how would it hurt more than help
@@Ehonda24 its physics man. The analog sticks can only do a 1000 hz. Stuffing the controller with higher polling rates will just cause delay. Placebo works wonders. People get horny when they c the zeros lmao
this is legit 10x better then nameless video ty
every other guy has 10 mins of talking, thanks shotzy for getting to the point fam! good luck this season chief!
Do you need to have the program open? Or it will save in your system already?
Saves
@@Piety_RS Yeah I know now haha thanks anyways dude! :)
mine says for the interval the number 4 ?
Mines don’t have a number at all 💀
Hello, did you figure out why? Im having same problem
Yes use 8000 not 1000
dose it overclocks it for good or you need to repeat the process before playing?
Just got my new scuf in and had to come back a rewatch this video.. Thanks bro
Thanks buddy this helped a lot!😁
Does this make much of a difference? Literal question, I’m a noob when it comes to this stuff!
Yes!
yea 5ms down to 1ms can be the difference between you winning or losing a close gun fight
Idk y people r replying yes, it literally would affect 1/1000000 gunfights, but it’s very easy to do so u might as well, I already did this months ago and didn’t notice any difference
can somebody help me with an issue im having please. whenever I open setup it opens for a second and closes immediately. this also happens with some other stuff that I download and yes ive tried running it as admin but I still have the same issue
same bro
can someone help me undo all of this? asking because i have windows 11 and literally cannot perform this operation. I did not know that. I tried to do this and now my PC will not even recognize when the controller is plugged into the computer. please help
yo i havw windows 10 but it happened to me because i didnt disable it so judt go to devices and then click on your controller and click remove and then just plug it back in
@@fluentt2894 that didn't work for me, please respond back
Bro this still helps me to this day your a legend
super clutch brother! thanks!
Can you exit out the program or does it need to be minimised running in the background?
tag me when you get a response
You can exit out of the program completely.
@@Armelmarcus do you have to re overlock every time you plug in the controller?
Seems to have worked on my Scuf Instinct controller for Xbox. I was skeptical because I heard normal Xbox controllers weren't overclockable but it felt like a big difference to me. Doesn't seem to work very well on my Turtle Beach Recon though, rate goes to 1000 but Bintervals stay the same. Might help a little bit but idk
I’m assuming that goes for the base Xbox controllers
Did it work on your Xbox?
@@thomasebbs8506 It still works on it, but I'm not sure about the overclock on it.
@@thomasebbs8506 ps4 controller max overclock is 1.0ms(1000hz), ps5 max overclock is around 0.5ms-1ms (8000hz-1000hz) and varies dependent on cord and usb port used, xbox max overclock is 4ms(250hz)
@@thomasebbs8506 have to be on PC
How do u overclock for windows 11?
Do the same steps. Worked for me on Windows 11
@@simpli9680 are u sure?
OMG thank you so much I know many people sayed this but it was so helpful :)))))
great tutorial, liked and subbed
Why does it say yes 1000 and its all red i have no responds time
damn he never answerd this
everything works but when i go to filter on device it says enabling this is probably impossible and it dosent have a 1 ms next to it
I had ds4 windows dowloaded when I deleted it it fixed the problem
bro i tried doing it and it messed up my controller and i couldn’t connect it again. i fixed it so it can connect now but how should i over clock it now?
so this is why the bunny hopping roze skins holding hands on rebirth gun my randoms so badly
I cant believe I didn't know this 3 yrs ago, I've noticed difference, but idk the extent. still worth it tho.
thank you so much you cant understand how happy i am to find a good explanation video
Says Yes 1000 but red please help
Same bro
@@AwwHoney_ua I fixed mine
@@inyeneumoh9763 how?
@@inyeneumoh9763 how ?
@@inyeneumoh9763how?
Should show ds4 windows next
Dont use ds4
@@vodric how’s his PS4 controller work then
@@bradsterszn3403 if he uses scuf it just works for COD. You dont need DS4
But a lot of pros do use ds4 on top. I’m interested why…
i personally use ds4 n it works perfectly, with the overclock
READ THIS: YOU must disable SECURE BOOT AND MEMORY INTEGRITY (If your pc has enhanced security in windows 11) in order to overclock your controller. Is it worth your pc being at a risk from malware? Secure boot maybe not but memory integrity is a pretty big leap from microsoft in security features. So basically play on a pc with more input lag and more security or less security and less input lag.
My computer was crashing with memory integrity off
I’ve tried this before and this is a simplest easiest video on this last time I tried. I got like 10 error codes every time and was confused why I didn’t work fall this video exactly and it worked perfectly. I can’t even explain how pissed I am right now because I should’ve did this shit two years ago. Thx bro
Thank you shotzzy you are the best overclocked my controller :)
My thing highlighted red what does that mean?
I'm having the same issue. Would love some help with this
Same here. Any fix???
When i click 'Filter on device', i have a warning message that appears. Does anyone else get this?
same
You need to turn off secure reboot
@@jaymorralesfit how you do that
@@EternityIl it’s easy bro look it up on TH-cam
I went from a 1.5 kd to 2.30 kd just by overclocking my controller
I heard Xbox controllers don’t need to be over overclocked is this true ?
So quick. I never hard of overclocking a controller
it highlighted it in red 2 days later and wouldnt recognize the controller on MW3 so i came back to the video because its the GOAT and so are you
This is happening to me aswell how did you fix it? Please tell me
You can over clock a comtroller 😂
Not all heroes wear capes. appreciate it bro.
Thanks for the video! Much appreciated!
Amazing help❤ thank you bro
Thanks bro very helpful and direct to the point
Works on xbox elite series 2 controllers just did mine, and looks the same as shotzzyz. Lets gooo.!!
u da goat even helping me in 2023!
Thanks for the short well made video. Can we call this series Shortzzies? 😁
shotzzy destroyed my controller with this video
great video, thank you so much!
every time i get a new controller i come back here
Made it so easy brodie appreciate you !
For those of you getting error code 193 - make sure to turn off Memory Integrity setting. Took me an hour to finally get it working.
If after disabling Memory Integry, it still shows red bar, you have to make a registry edit, there's a video out there, I forgot what the exact location was but it fixed it for me.
hey, i am getting this error is it safe to do that?
thank you
that's the only way I got it to work@@LITOSCEBS
ive done that and still get the 193 error code
@@mzlescod6142 Core isolation memory integrity should be of and make sure windows defender and any other ac is turned offf
how do you turn off memory integrity setting?
Thanks again for helping. Have better fast ads
i just did this now. when i click "install service" i don't get that pop up to "open" but it still worked. thanks for vid.
Thank you bro your a king for that
could not have made it any easier man, really appreciate it.
Do you need to do this everytime you want to use it, or do you need to have the program open every time ?
Thank you!
legend! thanks for the no bs tutorial