HOW TO INSTALL THE OIL PUMP IN YOUR CHEVY 350 ENGINE!
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- Installing the oil pump and rebuilding this 50 year old Chevy 350 (CSB) engine block at HOME! No machine shop needed! Installing oil pump pickup.
Check out all my other links:
linktr.ee/garagegoblin - ยานยนต์และพาหนะ
You made that sound so easy. I just wanna buy a 350 rip the oil pump out and put it back in thanks bud.
It is easy! Cars are just adult legos 😎
Finally, down to earth, straight to the point homemade garage with real talk! Thank you for this video you answered two days of searching TH-cam in 7:39 now I can do what needs to be done on my old GMT400 and be back on the road. Thanks again.
Excellent video very well explained
I don't even need to do this right now. You made this interesting to watch!
Thank you! I’m glad you enjoyed it!
Omg thank you bro. I just took off the pan and now I need to take off the pump and replace it with a brand new one
Glad I could help!
@@TheGarageGoblin would you know how many ft/lb. Of TQ the bolt needs?
@@Texasmule 60-70 Ft pound. I put 65 on here!
@@TheGarageGoblin thanks! Do you think I should change the old bolts for ARP On my connecting rods? I wanted to do main bolts too but my knowledge isn't that huge so I just left them alone.
I would open my oil pump up 1st pack it will grease or valo. to make sure of prime. Very important....💯
Is there no o ring anywhere for the oil pump Bc I just did this about a month ago and I’m getting low pressure again but it goes up and down a lot and up when I slow down? I don’t remember seeing a o ring when I did it myself
Hehehe…, looks like easy …. when the engine is outside
but my 383 engine is still in my IROC…😵💫., I can not remove the oil pan…. , engine out or remove the k -member ( I need a hp pump , have low oil pressure when the engine is hot ) ..,,
Greeting from Germany
Never use a Melling 55 (today made in China) oil pump! They break in parts, get a Moroso or Summit high flow pump! Better use a soft thin flat copper shim gasket between oil pump and main cap! You cant weld cast to steel....you need a clamp for securing the oil pump pickup to the body...can find it at Summit.
Melling not so good …?
I have a Stock ( New ) inside …. i have low oil pressure when the engine is hot ….
Engine ( 383 is build 2015 ) … from first day … low oil pressure… hmmmmm,
Greeting from Germany
If the oil pick up is set to low,would that give you bad or low oil pressure?
Unlikely, unless the oil pickup is sucking up dirt / sludge in the bottom of the oil pan and causing a clog. That clog could move into the oil galleys of your engine and could be potentially catastrophic. If you’re having low oil pressure definitely may end up needing to clean out the engine.
Thank you
Which camshaft are you going with?
Edelbrock 2102 cam!
Yes I'm sadistic 😂😂😂😂
🙄🙄🙄🙄🙄 you need to measure not just push the pan down over it and then push it down whatever feels good .... tack welding does not always work because you are welding cast iron to steel