PRO MOTOCROSS RACE TRAILER BUILD! - Paint and Flooring
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2020
- Rubber floor: www.amazon.com/G-Floor-Small-...
Consider buying some JWalk merchandise or becoming a Patreon Supporter to help me reach my goals and continue racing this winter and next season! I truly appreciate every single one of you. Links below:
JWalk Merchandise: teespring.com/stores/jwalk-merch
Patreon: / jwalk
Follow us on social media to keep up with the latest content!
@JeffWalker84
#DIY #Trailer #Build
Perfect timing I just bought myself an enclosed trailer
Use a roll of skateboard grip tape on the ramp door for those rainy motos or water dripping from power washer. Wanna keep B unit on 2 feet.
Really great diy, can't wait to see the finished product.
Hey I insulated the inside top of mine and sheeted it. Also installed LED strip lighting which is powered by a recessed (in the floor) battery. In the front triangle area, I built upper cabinets and shelving below. Also I used those metal strip brackets on the floor and one side. Very versatile and you can change things up with them. Also installed adjustable hook brackets on each side for clothing, gear, helmets, etc. And lastly I built a fold down bench for sitting and putting my boots on. It folds flat against the wall when not in use. Good luck with your build!
Definitely wanting to put LED strips in eventually! Never know when you’re going to need to work/load at night. Thanks man!
@@JeffWalker84 Anytime! love your vids
How much did insulating the ceiling help with hot days?
@@Huntmx24 A lot
IM SO EXCITED !!!
Can wait to see more of this
Holy crap!! Looks amazing.
Love the PROCESS 😎
Awesome video, thanks for your time and sharing!!!
Can’t wait for the next trailer build 👌👍
The water tank, because of the weight, should be at least over the axles or just forward of them. Too much weight on the back of the trailer will make it unstable when driving.
We fill the tank when we get to the track. The tank itself is very light. Thank you though!
looking forward to the season!!! Looks good Jeff
Buh buh buh buh B-UNIT!! Let’s get it this year Good Luck with all the nationals
Nice dude, guys this dude listens to his fans thanks Jeff love this and love how it kind of gives us a different look at your personality without the inherent stresses of moto... super cool thanks guys and can't forget #teambridge
Might want to put some heavy staples around the edges of the mat and secure it into the plywood
Don't forget to take in consideration the front to back and side to side weight distribution in the trailer. I would install a rectangle shape water tank and move it close to or over the axels if possible.
B unit and MAMMA walks be comin in clutch🤘
Any update on this project? I would love to see pics as I am working on my trailer and wondering how to set it up. Love the paint and the flooring!
Nice video 👍👌
Nice Vid Jeff!
Yep, it's official. You're a totally awesome dude, JW.
Great video I'm looking forward to seeing what you do with the space, have considered weight distribution, especially having to much weight behind the rear axel can make the trailer fish tail.
I like those shoes. Great content man!! Good luck this year🤙🏻
Epoxy with paint chips works great for race trailer floors
Def want to use an adhesive for the flooring. I did.
The soh-cah-toa joke made me laugh. I guess being a nerd pays off. We get our own jokes😂
9:17 had me laughing when Jeff Yehaaaed😂😂😂
I just broke my left wrist and right shoulder so I’ll be watching you for a few weeks
Make sure you have a spare tire, jack that works with your trailer and something to get lugs off. If you carry in impact just get the correct impact socket. Four will obviously work.
You should insulate the roof/ceiling & the put some kind of paneling over it to make a nice ceiling. Try to keep some of the heat down.
Love the American flag 🇺🇸 in your background.
No southwick this year.. bummed I can’t see you on the ktm. I see hella haters about “mommy:daddy money. Disregard them, you’re burning race fuel and grinding. Keep entering everything you can. Money and the size of rig does not matter. Chin up keep thumping ! Ktm 👍🏼
I would use caulking instead of quarter round. Black would be ideal. Makes a water tight seal so you can pressure wash your trailer. You can do both but quarter round is fragile.
I just got one and I have a TV and sound system in it 😁
All I hear is “how do you become rich racing Moto? Start off a millionaire “ 😂😂
Basically
Reporter: "So, now that you won the 10 million dollar lottery are you you going to retire?"
Privateer MotoX racer: "No, I'll probably keep racing until all the money is gone..."
Dude you can buy used enclosed trailers for under a grand
@@motobrostv1761 idk where your looking because up here in Michigan a halfway decent one in need of tires is $2,500+. Ya might as well buy new for 5k.
Hence why I just bought a 30ft schoolbus for 2k 😎🏁
@@jamesbarton875 I hate to inform you short track racing is so so much worse for Cost
use your left over rubber flooring as a baseboard, it'll clean up better than the white painted surface. Black caulking at that joint will make it look clean and seamless. enjoy your build.
Put the water tank in the nose of the trailer and use the side door for the hose to the power washer
Hey jeff you can get a rectangle water tanke and bolt it to the bottom of the trailer and then have an outlet on the side or hook up a little pump to pump the water if you have enough ground clearance
Mount the water tank on the trailer tongue
You should put the L shaped metal strips around the edges of the floor and wall. We have the same floor just gray and white walls and it looks great.
J walk bro I have been a inspiration in my life and drive me to get back racing u are a true American role model thanks bro I are a big influence on my life bro good luck dis year
That’s awesome man I appreciate it! Glad to hear you’re getting back into it
Thanks bro like I said you are an inspiration to me and your videos are helping me my problem is picking lines new Wich I'm working on but it confuses me sometimes but thanks for ur support
J walk when will the Loretta video be up
A ramp rear door blows though you lose alot of wall space.also frame in in the v nose a heater slash a.c unit then mount the propane tank on the tounge.
Just use some caulk around those edges either white or black would look sick plus it would seal it a lot better than wood!
It looks way better
Un fan mexicano 🙋🏾♂️
Love the flooring! Have you considered sealing the edges with clear silicone, so that if there are any spills there is no way of the moisture getting underneath the rubber?
I was thinking the same
Nice before and after!!!
Looking to put down vinyl flooring on my enclosed trailer too; curious as to whether to weather proof paint floor beforehand or whether laying flooring would cause floor to warp because moisture can’t escape.
SUBSCRIBED
Any more videos of the trailer build?
Get some more of the flooring and do the ramp door with it.
Build a small work bench over the water tank
Trailers are a pain in the ass van still best way to go
Can you make an full tour? Where you show everything to you shelfes and everything
Jeff heavy weight should always be on the front of a trailer look up for trailer whipping
Sucks that a lot of us, won’t be able to come and see you in person at the Nationals this year. But, if I can’t make it to Springcreek this year, I’ll be rooting for you from my couch.
id put black caulking around the flooring
Does it have a roof vent? If not, it might be a good add on to do. Also, vents in the helmet/boot cabinet so they don't get all hot and stanky. 😄 looking buttery good job
You should get aluminum cabinets
Rubber mats are slippery when wet. Defintely not a good idea for the ramp.
Using truck bedliner is also popular and it can be sprayed on, rollered on and brushed onto the floor and the wall's bottom tirm. At the mating joint area between the wall and floor the bedliner stuff will seal that gap and I have seen people water hose or gently power wash the floor and not have to worry about water getting into the floor or walls.
5:25 good job Jeff, doing the hard work of filming, and you let B unit have the easy work of just rolling and brushing on some paint. Your man treats you right B unit!
Seen somewhere low profile water tanks that a guy was able to mount under the trailer so that it didn't cut into the interior room. Bonus of filling it and not worrying about spilling too much water inside the trailer. The low profile tanks spread the weight distribution over a large area (mounted horizontally) so I think you don't have to worry much about the placement other than physical fitment. I'm thinking about buying a trailer and doing the same, so I'd really like to see you figure it out! Heard some pressure washers don''t like the low height of the water inlet though for priming purposes maybe.
5:28 oh yeah!
👍
whens par 2
Update on finished build?
Cara um dia vou ter uma moto igual a essas 😁
What ever happened to this it was such an inspiration to my trailer build
Aye
Pt. 2
Did you ever make a follow up video?
Get a awning off the side of the trailer
I would just caulk the edges with silicone instead of the 1/4 round. That way no water can penetrate. Put a bead down and spray it with windex and wipe it with a sponge for a perfect bead.
yur gonna want to put the water tank near the front. on the tounge if you can. or maybe stick to filling it up at the destinattion
Insulate the roof at a minimum, any 3/4 to 1 inch foam board will do. Cut it nice and tight, then use foil HVAC tape for the seams. The hard part is putting up some paneling on the ceiling after insulation, but its worth it once you note the difference in temp radiating on your head during the summer sun
U can put ac in that
Do you ever plan on making a video of you riding that cr250
Add the second video of the new setup
Jeff I really wanna see the 2 smoker 🌪 she almost done
stolen I believe
2 stroke was stolen
Water tank that far back is a bad idea. Its going to really mess with your tongue weight.
We won’t be traveling with water in the tank! We fill at the track
@@JeffWalker84 Good job both of you!! That was my concern too.
Bro me my dad and brother just made a sick toy hauler out of an old box truck for my enduro races
Would you ever take a full time ride into ama motocross from hrc honda if you ever got a chance to ride with them
Part 2
coming along nice Jeff. you didn't need to gluethe rubber flooring in place, just curious. Or is it so thick and heavy you didn't have to really.
Do a vlog from racing with your brother.
Put something on the tin roof it will get hot.
where’s the rest of these vids man!?
I really wanted to see what it looked like when he was totally done . . . did he repost?
I got a single axle 6x12 because im pulling with a V6, fits my microsprint with about 900lbs to spare capacity wise. But I didn't really plan in my head the weight from tools, cabinets, etc. How much does that flooring roll weigh? I've seen rolls that were 150lbs before I gotta be careful with my weight lol
Put the nonpotable water tank on the tongue of the trailer
Hey part 2???
SOH CAH TOA was Trig bro! lol trailer looks great man
Na it’s geometry, maybe different per school.
Also physics 1 and 2!
Jeff Walker Ayo chill math’s my worst subject!🤘🏻 good luck at lorettas bro , I know another privateer headed down as well. Finish strong for the #orangebrigade
@@the-bt6lc It literally is Triangles. Prolly where the 'Tri' in trigonometry comes from? just a guess
Paint the water tank
Ello
Jeff, did it wrinkle up any at all when you laid it inside the trailer?
Yo Jeff Do you have a risk racing code? I have the lock and load system and love it
What is the water tank for
Update video?
How r u going to clean the rubber flooring w that texture
When is the next episode!!
80x42
Caulk the edges