I was going to say that, but worse and My Mechanics took my comments and made a new one... Love the polished metal. The yellow pops. It's a gorgeous tool now. Too pretty NOT to use...
3 things I love the most about watching u wrk: 1: The sandblasting of course 2: The finished product 3: When u disassemble everything and have all neatly on yur table! Keep up the good wrk I will watch u for as long as u have a channel
Very nice job! It looks new. I love the yellow color and the clear plastic base allows you to see if everything is ok inside. The polished metal sides are a work of art, magnificent! For scratches in plastic, use sandpaper to remove deep scratches, then progressively finer grit sandpaper till you hit 4000 grit or higher. After that, polish with a machine using plastic polisher or car polish, for fine shine and gloss.
What a work of genius, it was too beautiful a work of art worth gold, what a show of creativity managed to restore and make it more beautiful than it was when it was new, my congratulations
Tysy! Love your attention to details, your respect for old good tools! Keep restoring the history, your channel is one of those who really makes genuine restoration.
Я случайно попал на ваш канал и был в восторге от вашей работы и вашего отношения к старинным вещам. Ваша культура работы и терпение меня просто поражает. Вы мастер высшего класса. Жму вам руку. Спасибо за видео . Побольше бы таких интересных видеороликов. Ещё раз спасибо.
I enjoy your restorations Tysy. A couple of friendly ideas? Use the correct size flat tip screwdriver when removing screws. I restore VW parts and always have to deal with damaged screw slots from someone using the wrong size screw driver. The other suggestion for you would be to have a plating station where you can bright zinc the screws, hardware, brackets, etc. They have different chromates you dip the freshly zinced parts into that change the color to black, yellow, etc. This provides superior protection over bluing the parts which is only really cosmetic vs. long term corrosion protection. Keep up the good work!
LOVE(!!!!) the clear bottom and the Yellow, Chrome,and Black..... ROCKS!!!!!!. Have been buzzy and have not had time to watch your show. Always great shows.
Awesome job as always! I love the clear bottom detail. Gives it a little extra cool effect. My 8 year old son an I look forward to your videos. He won’t watch anyone else, he says your the best.
Rhâaaa ! Je suis jaloux de ton savoir faire ! C'est pas des machines que tu nous présente mais des œuvres d'art. Quel patience ! Jaloux, Jaloux, jaloux je suis.
Not to be nitpicky. but you have the armature in backwards. The anti-clockwise nut should be on the left. As it is, the grinding wheels will loosen with use, creating a hazardous situation...
NITPICKY ? I didn't even notice, but will in the future, good eye M. Mitchell , now I have to go back and see what the heck you are talking about :-) .
@@kenzpenz Basically, the grinding wheels rotate such that the wheels grind downwards at the front of the grinder. So, when you face the lefthand wheel, it turns clockwise. A clockwise-tightening nut will eventually work loose, potentially permitting the wheel to fall off while the grinder is in operation. Thus, an anti-clockwise-tightening nut is needed on the left.
Really nice work on this grinder set. The inside seemed to be in pretty good shape, compared to the exterior. Once again you made the tool an item would like to have in their shop. Thanks for sharing this story with me.
Really like when you restore something but you make it your own. Like when someone covers a song they pay respect to the original but put a little bit of themselves into it at the same time.
Superbe belle restauration, ça me donne envie de refaire mon vieux touret. Pour la peine, tu aura, comme d'habitude, un GROS pouce bleu. Merci pour le partage.
Pretty good. If you want to remove the deepest scratches on the plexiglasse, you need to sand them away. You start with the roughest grit, then take a less rough one, and another less rougher one. It will leave them opaque, but then, you polish it back to clear.
As always it was a beautiful job. It didn’t even look like the same machine by the time you finished with it. I so enjoy your videos and always look forward to your next one.
This is a wonderful restoration, and I love the clear base! That yellow colour is perfect too! Plus those new bearings make it run so much more smoothly and quietly than most comparable experiences with bench grinders I've had. Magnifique.
Didn't think much of the colour until you assembled it very nice I like the transparent base Dfid you fix your own grinder because I see you don't have to spin it with your hand to get it going 👍👌
I always look forward to your videos, your work is great and the videos are well edited, you have a big fan here in Alabama please continue to post your work.
Excellent travail, c'est vraiment un plaisir de regarder ces vidéos, j'aimerais tellement avoir un atelier pour faire des renos... C'est hyper passionnant et enrichissant ! Félicitations, Good job ! 🇫🇷
After You watch this Awesome video you should check my Knife Restoration 😍 th-cam.com/video/S4GwhXnPQw0/w-d-xo.html
are u getting new plosh wax soon
Beautiful job as always Tysy. I love the big polished parts with the yellow and black details, it's looking perfectly.
Thank you so much 😊
Wow, man! An attaboy from the Grandmaster! You really deserved it, Tysy! Great job!!!
Wow a @mymechanics thumbs up... you are acknowledged by the master himself... and deserved!
yeh got to agree
if this fella is impressed..... well must be a good job
I was going to say that, but worse and My Mechanics took my comments and made a new one... Love the polished metal. The yellow pops. It's a gorgeous tool now. Too pretty NOT to use...
Can't wait to see "Restoration but only using tools I've previously restored"
I hope to see it as much as I hoped for the test ride after moped restoration
YES!
He actually used the German sharpener that was restored
I suffer from PTSD. Your videos are relaxing enough to help me sleep. They aren’t boring. Just serene
I love watching blueing, it’s like magic
3 things I love the most about watching u wrk:
1: The sandblasting of course
2: The finished product
3: When u disassemble everything and have all neatly on yur table!
Keep up the good wrk I will watch u for as long as u have a channel
That's also my favorite 3 Things about watching tysy work !👍😃
Your shop must look amazing with all of the tools you've restored, you should show us what it looks like!
Check the photos on his Instagram account. Cheers!
Very nice job! It looks new. I love the yellow color and the clear plastic base allows you to see if everything is ok inside. The polished metal sides are a work of art, magnificent!
For scratches in plastic, use sandpaper to remove deep scratches, then progressively finer grit sandpaper till you hit 4000 grit or higher. After that, polish with a machine using plastic polisher or car polish, for fine shine and gloss.
Just beautiful to hear that motor quietly whirring after the restoration. I am spellbound during your restorations. Superb job yet again.😊
Your videos are getting much better. I love the way you laid out the parts at the end of disassembly, very visually pleasing
I wholly approve of the transparent plate on the underside. Another awesome restoration for the books.
When you showed the pile of unsorted parts my OCD almost had a heart attack! I am so glad that you decided to sort all those before starting cleaning
I have OCD too
OCD gang
I might have OCD too. I don't know.🤔 I have to get checked out.😷
What a work of genius, it was too beautiful a work of art worth gold, what a show of creativity managed to restore and make it more beautiful than it was when it was new, my congratulations
Love the chrome and yellow absolutely beautiful
Tysy! Love your attention to details, your respect for old good tools! Keep restoring the history, your channel is one of those who really makes genuine restoration.
Я случайно попал на ваш канал и был в восторге от вашей работы и вашего отношения к старинным вещам. Ваша культура работы и терпение меня просто поражает. Вы мастер высшего класса. Жму вам руку. Спасибо за видео . Побольше бы таких интересных видеороликов. Ещё раз спасибо.
I like the clear bottom plate. Very well done restoration. Now you can dedicate on bench grinder for polishing and the other for grinding wheels.
NO matter how many times I see it the "blue-ing" always amazes me, Beautiful work as always.
That grinder is a work of art!
Clear bottom cover is great, I like that. The polished aluminum not so great. But a beautiful restoration job. Well done, again 👍🙂🛠️
usually wet sanding is my favorite part, but today it was bluing. Love the clear bottom!
Sandblasting literally looks like the most fun thing ever! I want a sandblaster 😂
I enjoy your restorations Tysy. A couple of friendly ideas? Use the correct size flat tip screwdriver when removing screws. I restore VW parts and always have to deal with damaged screw slots from someone using the wrong size screw driver. The other suggestion for you would be to have a plating station where you can bright zinc the screws, hardware, brackets, etc. They have different chromates you dip the freshly zinced parts into that change the color to black, yellow, etc. This provides superior protection over bluing the parts which is only really cosmetic vs. long term corrosion protection. Keep up the good work!
LOVE(!!!!) the clear bottom and the Yellow, Chrome,and Black..... ROCKS!!!!!!. Have been buzzy and have not had time to watch your show. Always great shows.
I am happy you kept this one!
Magnificent!!! I love that you chose yellow paint. Thank you!
i think it's cool to see inside 😎👍 excellent work
Really impressive. You’re the first craftsman I’ve seen who polished parts rather than paint or powder coat. That was a genius choice! Thanks!
BEAUTIFULLY RESTORED, Job well done.
Awesome job as always! I love the clear bottom detail. Gives it a little extra cool effect. My 8 year old son an I look forward to your videos. He won’t watch anyone else, he says your the best.
I'm lost for words. You are the best one on YT
I like the fact that you are restoring something that you can use to help restore another tool.
Bravo, beau travail !
Rhâaaa ! Je suis jaloux de ton savoir faire ! C'est pas des machines que tu nous présente mais des œuvres d'art. Quel patience ! Jaloux, Jaloux, jaloux je suis.
Wow! No vibration and beautiful. Perfect. Best restore of bench-grinder I have ever seen.
Love the plexy underneath, the color chosen and the chrome mirror and black finish.
It looks like it was made in the 70s with the earthtone green color. Nice work Tysy.
Tysy you made from this one a beauty.... I like the yellow painting with the black and chrome polisched parts... Verry Nice😍😍😍
Dig your series of "now that I have learned stuff". The scales and the grinders show how much you've evolved.
One of your best. I love the plexi-glass bottom. Keep up the great work. Tres bien !
Peñarol Noma!!! Excellent work!!!
Not to be nitpicky. but you have the armature in backwards. The anti-clockwise nut should be on the left. As it is, the grinding wheels will loosen with use, creating a hazardous situation...
thank you 😊, i will change it
NITPICKY ? I didn't even notice, but will in the future, good eye M. Mitchell , now I have to go back and see what the heck you are talking about :-) .
@@kenzpenz Basically, the grinding wheels rotate such that the wheels grind downwards at the front of the grinder. So, when you face the lefthand wheel, it turns clockwise. A clockwise-tightening nut will eventually work loose, potentially permitting the wheel to fall off while the grinder is in operation. Thus, an anti-clockwise-tightening nut is needed on the left.
I was hoping someone else noticed that. I switched devices just to let him know. Beautiful restoration though.
You have an eagle eye for details. I didn’t notice that at all
I like the transparent bottom. Cool idea!
Beautiful in yellow !
The plexiglass bottom is pretty awesome good idea mate
Felicitaciones por tu trabajo desde Buenos Aires Argentina !!!
The clear underside was a great idea!
Works like new and it looks better than new lol, awesome restoration.
that big, silver claw tool at 3:21 was SO COOL!! And what a niche piece of equipment! also the clear plastic bottom was a very nice touch imho.
Awesome job!! It's like a bumblebee version 👍🏻💪🏻💪🏻
Excellent job Sir,
Great photography and thanks for sharing.
Very Nice, just the Inspiration I needed to do a Jet Bench Grinder I've had for years.. Thanks..
I love the transparent bottom. Good job!
Great job! I love the yellow you chose.
Really nice work on this grinder set. The inside seemed to be in pretty good shape, compared to the exterior. Once again you made the tool an item would like to have in their shop. Thanks for sharing this story with me.
Colorfully Painted 👍😎👍
So good. I wasn’t a fan of the blueing until I saw it assembled. Love it now.
Beautiful job as always ....
Looks great! Nice touch with the Lexan bottom plate🍻!
Отличная работа больше видео . ))))
Great job. My fav part was the white dot on the power switch
Great job, like every time. But be kind, dont put the finished restauration photo in preview - there's no more "wow" at the end
It stands out in a sea of content because of the "after" pictures. I do agree somewhat but he has to look out for his business as well.
Restoring these machines is very impressive
Good job the polished parts look good.👍
Ficou sensacional amarelo com cromado 👍👏
Really like when you restore something but you make it your own. Like when someone covers a song they pay respect to the original but put a little bit of themselves into it at the same time.
The clear bottom was a great idea
Love this one. Searching for a used cheap one myself.
Super, colour combo stands out wonderfully
Stay safe
Идеальная работа 😍🤩😍
Мини Бамбалби😄
Superbe superbe travail !!!👌👌👌👌👍👍👍👏👏👏👏👏
Superbe belle restauration, ça me donne envie de refaire mon vieux touret. Pour la peine, tu aura, comme d'habitude, un GROS pouce bleu. Merci pour le partage.
This man is like the Swiss army knife of restoration, his skills know no bounds!
Beautiful job
very nice paint
Лучшая реставрация!!!
I like the clear plastic showing the wireing in that area.
Did you noticed the ground that he conected but at the plug didnt had a condition for it?
Very nice. I like that you didn't paint the entire grinder. I think it looks great with the polished pieces.
The clear bottom is a very nice touch... easy visibility if trouble arises.. like blown capacitor or switch smokes.
Pretty good. If you want to remove the deepest scratches on the plexiglasse, you need to sand them away. You start with the roughest grit, then take a less rough one, and another less rougher one. It will leave them opaque, but then, you polish it back to clear.
Beautiful restoration
Great paint and polish. Perfect as alway. The clear bottom panel is genius. 👍🏼
T'es un génie !! j'ai beau regarder tes videos souvent, je n'y trouve rien à dire !! à part bravo !!
As always it was a beautiful job. It didn’t even look like the same machine by the time you finished with it. I so enjoy your videos and always look forward to your next one.
TOP REPAIR AND PAINT JOB READY FOR SOME GRINDING
The clear bottom was a great idea. Thanks for another amazing video.
Wow, you totally transform the grinder, fantastic job
this grinder look like better than brand new 👍👍
Terrific restroom looking forward to the next video, regards John
This is a wonderful restoration, and I love the clear base! That yellow colour is perfect too! Plus those new bearings make it run so much more smoothly and quietly than most comparable experiences with bench grinders I've had. Magnifique.
Didn't think much of the colour until you assembled it very nice I like the transparent base
Dfid you fix your own grinder because I see you don't have to spin it with your hand to get it going 👍👌
Nice I love the color and the polished parts. The clear bottom is awesome bro, great work.
Awesome ! It looks like a bloody Naboo fighter ! Well done
Always a pleasure to watch a master at work and what a great result. In this video I found my new Tysy viewing satisfaction - that bluing liquid!!
I always look forward to your videos, your work is great and the videos are well edited, you have a big fan here in Alabama please continue to post your work.
Excellent work on restoration. I can watch you perform your magic for hours; I love bringing the past back to life.
Excellent travail, c'est vraiment un plaisir de regarder ces vidéos, j'aimerais tellement avoir un atelier pour faire des renos... C'est hyper passionnant et enrichissant !
Félicitations, Good job ! 🇫🇷
Absolutely beautiful!
i hope you still keep all of the stuff that you've restored...keen to see it all
You're very capricious, which is why I find this channel one of the best about restoration here on TH-cam .