ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Cooler Master TD300 Mesh Build - Step by Step Guide
ฝัง
- เผยแพร่เมื่อ 15 ส.ค. 2024
- A full step by step PC build guide in the Cooler Master TD300 Mesh. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
00:00 The Parts
01:12 Preparing the Case
05:30 CPU Installation
06:14 M.2 SSD Installation
06:38 RAM Installation
07:05 CPU Cooler Bracket Installation
07:28 Motherboard Installation
07:47 Case Cable Installation
09:11 Power Supply Installation
11:25 AIO CPU Cooler Installation
15:27 Case Fan Installation
16:30 Graphics Card Installation
17:07 Cable Management
17:46 Completed Build Footage
18:27 Installing Windows 11
20:05 Driver Installation
22:55 Updating Windows
23:23 BIOS Update
25:17 Adjusting BIOS Settings
28:12 Confirming RAM Speed
28:43 RGB Software Demonstration
30:44 Outro
Parts used in the build (Amazon links are Affiliates Links)
• Cooler Master TD300 Mesh PC Case
UK - amzn.to/34vjo36
• ASRock B660M PRO RS
UK - amzn.to/3JahQKK
• Intel Core i7 12700K
UK - amzn.to/30iHuvV
US - amzn.to/3IJhB9R
CA - amzn.to/3dMWup7
• Cooler Master MasterLiquid PL240 Flux CPU cooler
UK - amzn.to/3HJUxan
US - amzn.to/3HKFME3
CA - amzn.to/3rGezgl
• Kingston FURY Beast RGB 32GB (4x8GB) 3600MHz
UK - amzn.to/37NCT5b
US - amzn.to/37JSin1
CA - amzn.to/3m6igcU
• NVIDIA GeForce RTX 3060 Ti GPU
UK - www.nvidia.com...
US - www.nvidia.com...
CA - www.nvidia.com...
• Sabrent M.2 NVME SSD QLC (1TB)
UK - amzn.to/3rq6tpY
US - amzn.to/37LQU4c
CA - amzn.to/2WIYQwQ
• Cooler Master XG 750 Platinum Plus Power Supply (PSU used in the build)
UK - amzn.to/3oEA4vW
US - www.coolermast...
CA - www.coolermast...
• Cooler Master XG 750 Platinum Power Supply (Recommended PSU)
UK - www.coolermast...
US - www.coolermast...
CA - www.coolermast...
• Cooler Master SickleFlow 120 ARGB
UK - amzn.to/3gUl3SJ
US - amzn.to/3rPSzzP
CA - amzn.to/3gDJdAx
• CableMod PRO ModMesh Cable Extension Kit
UK - eustore.cablem...
US - store.cablemod...
CA - store.cablemod...
• CableMod PRO ModMesh 12 Pin Micro-Fit PCI-E Extension for NVIDIA 3000 Series (GPU)
UK - eustore.cablem...
US - store.cablemod...
CA - store.cablemod...
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
A time-lapse of the build can be seen at • Cooler Master TD300 Me... the case review at • Cooler Master TD300 Me... and photos of the build at pcpartpicker.c...
Useful Links
• How to make a Windows 11 Bootable USB - • How to Make a Windows ...
• Motherboard Drivers - www.asrock.com...
• GPU Drivers - www.nvidia.co....
Music
Thunderbird - OOYY www.epidemicso...
#pcbuild #CoolerMaster #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc #TD300Mesh
![Exclusive! น้องลิกก้า&น้องโรร่า มาแล้ว!! [cc] แดนแพทตี้ SS2 | EP.48 |](http://i.ytimg.com/vi/UmlpJhRekyY/mqdefault.jpg)
Clean build, detailed step by step guide, straight to the point, and no unnecessary jokes. thank you so much!
Beautiful build, you never disappoint with the color themes!
26:24
Learnt something new there. I have an ASRock board too (B550M) and I didn't even know that I had to change the CPU_FAN2 from Fan to Water Pump. Here I was thinking my Cooler Master AiO was already working for the last couple weeks since I completed my build, and now I can hear the water moving (initially) and the tiny motor spinning. It's fully working now. Thanks for that. 👍 You got a new subscriber.
Haven't noticed an improvement in temps. 5600G is still hovering around 41-41.5C in BIOS. No different than before. Running on silent profile. Only see half to one full degree reduction in temperature when the pump and AiO fans are spinning at maximum.
Brilliant video, easy to understand and straight to the point
Great comprehensive guide. My case, the Cooler Master NR400, shares the same chassis so there's not much different except for the fan/argb hub and removable top panel.
Ty i like because you show how to setup bios
Thx for showing the built-in RGB modes! 👍
For some reason it made me smile to see that you too have those littles cuts on your fingers that you get when you build PCs, becauses the edges are always so sharp XD
Its not just me !
I did not understand the connection to the usb 2.2 header at minute 11:01, where does it come from? If anyone knows please comment
im also clueless about that part
yes i don't have it
Its for the power supply, the powersupply used in the video has a digital screen that displays temps, so it must be connected via usb 2.0 to the motherboard in order to control the display. If you are using any other psu tho, u can skip that part
@@mykojeffersonjavier1188 Thank you! I was following this build today and thought I was missing some cable.
Increíble estética! Tenés algún video de gestión de cables? Impecable trabajo.
👍 awesome build.
Hello!I bought new xg750 platinum.Installed in new PC? connected and it won't work - even no display, no rotation fan.What should I do or check?
mike.
How many fans can be connected to the hub? I'd like to use 3 120mm in the front, 1 in the back and 2 on top and control them all with the motherboard software so I am wondering if something like that would be possible in this case
The system fans don't want to start 0 rpm on both need urgent help!
Check if the fan controller is connected and the fan headers are connected aswell. If this doesn't help then look at the manuel
Hello, I have a questions. Start from 8:08 you put the ARGB and fan cable. Is it included in the case or we should buy ourselves? Thank you. I just bought TD300 mesh today and I am going to build it tomorrow.
Mine didn’t start i don’t know what I did wrong?
Thanks for the inspiration
My reset button resets the computer... 😢 How can I change the colour of the lights? Can you please help?
Great work!
how to change to rainbow color in same time (not solid) ? mine rainbow cant appear in same time, your video show 4 or 5 color in same time, how ?
how do i change the rgb on the fans???
Do i NEED the cable extensions?
was curious when it comes to connecting the fan hub does that go to the mother board with the cable that is labled optional , i built two builds and one burned up the fan header on startup.
I think the problem with this case is the future upgrades. I’m current gpu is rtx3080. If I want to uprade to 4080, I think i have to buy a new pc case cause 4080 ain’t gonna fit with this one. Thoughts?
I am planning to go for this case with the same b660m Motherboard but doubtful if my Asus 1060 3gb PCIe 3 will be connected to the main slot or need to put it in the 2nd slot below which is kinda not possible in the case. Can you help?
Or should I go for Lian Li 215 white?
Can i apply wifi card under graphics card (3060) in this cabinet?
why is the middle motherboard screw mount thing is longer than the sides pls help lol
Graphics card link: sold out - any recommended alternatives ?
Rtx 3050?
I have a problem with this case. I connected the front fans, but they do so much noise and are spinning very fast. Any way to fix this?
There is a section of this video where he sets the fan curves in the bios, that should be able to make them a bit quieter
The aio cooler is pushing air outside the case?
Thanks..
does anyone know how to control the two front fans that came with the case?
I'm looking for an answer too! Did you find anything?
@@Aryan.Kamboj. still searching my friend ☹️ would you say they're pretty loud? And my motheboard software doesn't recognize them either (Asus). Contemplating I just take it back to the PC place and pay them labor to do it.
Thanks for ssd sata and hdd prts. Oh wait
no sata SSD build?
With a 1tb m.2, why would you use a sata?
@@goheadcuz1618 well, i think it's a tutorial video, so no matter how much your M2 storage is. it shouldve have added the way to assemble the SSD sata.
I have a question about this case...can i remove that reset plug from the hub and plug it into my motherboard instead? Im not gonna use the stock fans.
Yes you can. If you watch the video it is mentioned..