Fabulous! My dog knocked my clippers off my table this morning and the blade flew off. Even with the printed instructions I couldn't figure out how to get the blade back on. Your video was fabulous. I could see that my hinge had collapsed, making it impossible to put the blade back on. I pulled the hinge back up, and voila! The blade slipped right on. This video kept me from throwing my clippers against the wall!!! Thanks!
Ivan, I just found you and I just had to say THANK YOU!!! I was ("helpfully") trying to clean my husbands clippers and the blades popped off before I could see how they attached . Your How to was BY FAR the best video ive ever seen admist the multitude of competly irrelevant and unhelpful reviews and tutorials. GOOD JOB!
thanks Ivan same thing my wife took the blade off but didn't know how and the hinge hadn't come back, so I was pulling my hair out trying to put the dam blade back on..till I saw you do it...thanks again
With the Andis beauty master, I cannot remount the lower cutter blade on the armature. The blade does not fit into the plastic. Is it supposed to go in all the way, or is it just supposed to sit on top of it?
Hey Ivan. I have ordered Andis superliner rt-1, for home use, and it should arrive these days. I watched videos where you explain how to set blades for this trimmer, but i noticed that when you pop back the blade you don't do anything like adjusting the armature pin and hole. Also the trimmer is turned off during that process. So with superliner rt-1 I can just pop back the blade with its motor turned off and i don't need to adjust anything else? Is that correct?
Hey ivan I've been having this problem with my blade for my improved masters the bottom or cutting blade is slanted downward and the stationary blade seems to be straight Any tips or a video possibly?
I love the andis masters but recenly I ordered some from amazon and the blad assembly was too crooked, specially the inner blade the smallest. I don't know if that how they supposed to be but I returned it, and got a replacement and I got a new one, and same story, the inner blade wasn't straight, it was crooked. Don't know what to do
need to show how to change the AGC [ animal ] with the release button because mine looks completely different inside than the first trimmer that was depicted....and there were no instructions in the box....and nobody at Petsmart [ where I purchased it ] knew how to change the blade....
I'm having trouble with putting my blade back on my Andis AGC razor. I've went through your videos, and it's like the part of the razor that's not detachable, the latch on part, is too tight and won't flip up.
This clip doesn't seem to cover my clippers - Andis AGC Super 2 Speed. Any tips on how to get the blade back on please? I took it off to clean and now can't get it back on at all ... thanks x
I have an Andis Master thats at least 20 years old. I took the blades off and used a brush to clean out hair...not the motor hums but the blades don't move! HELP!
i have a model mba, took it apart to clean it and cant get it back together i did not see my clipper getting put back together - where can i find that info i m also trying to find someone in the northern wisconsin area to fix it any help? i m not a groomer just use them on short haired dog and cats. tks for any advice
i have tried to clean the fur out off the cutting blade by sliding it out, but by accident i slid it too far and it came off fully. now i cant slide it back in place.
Clipper Guy, this is great, but I have one (stupid) question for you. The video isn't clear enough for to see which direction the lower clipper blade is facing. Should that and the upper blade be curved in the same direction, or should they be sort of curved into each other? Thanks!
hi evan, seriously need your help with the Moser 1400 it slipped out of my hand and blade/clipper came out and its complicated I tried so hard to put it back but no use :{ plz help
Fabulous! My dog knocked my clippers off my table this morning and the blade flew off. Even with the printed instructions I couldn't figure out how to get the blade back on. Your video was fabulous. I could see that my hinge had collapsed, making it impossible to put the blade back on. I pulled the hinge back up, and voila! The blade slipped right on.
This video kept me from throwing my clippers against the wall!!! Thanks!
This has been the most helpful video I have ever watched in my extensive viewing history of TH-cam videos. Thank you so much.
Caleb Leger I Totally agree
THANX 4 VID. YOU ARE A VERY CLEAR AND CONSISE TEACHER. I GOT ALL THE INFO I NEEDED TO MAKE REPAIRS. TY AGAIN!!
Ivan, I just found you and I just had to say THANK YOU!!! I was ("helpfully") trying to clean my husbands clippers and the blades popped off before I could see how they attached . Your How to was BY FAR the best video ive ever seen admist the multitude of competly irrelevant and unhelpful reviews and tutorials. GOOD JOB!
That is a long time ago. I do not have access to that tool. Sorry.
thanks Ivan same thing my wife took the blade off but didn't know how and the hinge hadn't come back, so I was pulling my hair out trying to put the dam blade back on..till I saw you do it...thanks again
Excellent narration. Thank you.
You're the man.. you just saved my clippers from the trash! Cheers mate.:-);-)
Can you make a video showing how to readjust a cordless clipper where the blade is held down b a spring and screws
With the Andis beauty master, I cannot remount the lower cutter blade on the armature. The blade does not fit into the plastic. Is it supposed to go in all the way, or is it just supposed to sit on top of it?
Thanks! I made it way harder than it really was, haha!!
hey ivan where can i get those blade ears the ones that hold the cutting blade in place??
i just bought wahl groomsman....can u plse tell me how can i put shaver in the machine...
Hey Ivan. I have ordered Andis superliner rt-1, for home use, and it should arrive these days. I watched videos where you explain how to set blades for this trimmer, but i noticed that when you pop back the blade you don't do anything like adjusting the armature pin and hole. Also the trimmer is turned off during that process. So with superliner rt-1 I can just pop back the blade with its motor turned off and i don't need to adjust anything else? Is that correct?
толковый чувак. intelligent dude.
Hey ivan I've been having this problem with my blade for my improved masters the bottom or cutting blade is slanted downward and the stationary blade seems to be straight
Any tips or a video possibly?
I love the andis masters but recenly I ordered some from amazon and the blad assembly was too crooked, specially the inner blade the smallest. I don't know if that how they supposed to be but I returned it, and got a replacement and I got a new one, and same story, the inner blade wasn't straight, it was crooked. Don't know what to do
Model hc95wv conair clippers how do i reattach the blade after cleaning
I have changed the blade drive but a coupe of pieces fell out as I was changing the drive, how do I put the clipper back together.
how long do the blades last before replacing
Hey ivan I have andis ls headliners is replacing the blades on those similar to t outliners ? please help !
thank you in advance
need to show how to change the AGC [ animal ] with the release button because mine looks completely different inside than the first trimmer that was depicted....and there were no instructions in the box....and nobody at Petsmart [ where I purchased it ] knew how to change the blade....
I'm having trouble with putting my blade back on my Andis AGC razor. I've went through your videos, and it's like the part of the razor that's not detachable, the latch on part, is too tight and won't flip up.
This clip doesn't seem to cover my clippers - Andis AGC Super 2 Speed. Any tips on how to get the blade back on please? I took it off to clean and now can't get it back on at all ... thanks x
Hi Ivan, I have Conairpro. After I put a new clipper, it is no cutting. Do you know why? Thank you.
Hello, does a G0 model outliners blade fit a model G Andis outliner? please help
I have an Andis Master thats at least 20 years old. I took the blades off and used a brush to clean out hair...not the motor hums but the blades don't move! HELP!
i have a model mba, took it apart to clean it and cant get it back together i did not see my clipper getting put back together - where can i find that info i m also trying to find someone in the northern wisconsin area to fix it any help? i m not a groomer just use them on short haired dog and cats. tks for any advice
i have tried to clean the fur out off the cutting blade by sliding it out, but by accident i slid it too far and it came off fully. now i cant slide it back in place.
Clipper Guy, this is great, but I have one (stupid) question for you. The video isn't clear enough for to see which direction the lower clipper blade is facing. Should that and the upper blade be curved in the same direction, or should they be sort of curved into each other? Thanks!
hi evan, seriously need your help with the Moser 1400 it slipped out of my hand and blade/clipper came out and its complicated I tried so hard to put it back but no use :{ plz help
i hv a geepas gtr 31 trimmer.. i cdn't change the blade. help me plzzz...
Thank you!!
thank you
ok thanks.
cdn't change the clipper.. plzz help me..
Lol how did I get here in 2021? XD